[Tue Aug  7 10:18:24 2012] Detection parameters:
  Position = (240.4, 264.9) = 13 57 45.53 -59 19 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.8 +/- 9.0
  Background counts = 4.4
  Rate = 0.004 +/- 0.0007

[Tue Aug  7 10:18:24 2012] Off-axis axis estimate = 4.86'
[Tue Aug  7 10:43:10 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 10:43:10 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Tue Aug  7 10:43:10 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.894
[Tue Aug  7 10:43:10 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.86"
[Tue Aug  7 11:02:26 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_src3.ximg exists
[Tue Aug  7 11:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_src3.csv
[Tue Aug  7 11:02:26 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Aug  7 11:02:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_src3.csv
[Tue Aug  7 11:02:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 11:02:26 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Aug  7 11:02:26 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Aug  7 11:02:26 2012] Fit fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Aug  7 11:32:29 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.105308 pixels away
[Tue Aug  7 11:32:29 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:32:29 2012] Assessing source extent using major
[Tue Aug  7 11:32:29 2012] Source does appear to be extended
[Tue Aug  7 11:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 11:59:04 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 11:59:04 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Tue Aug  7 11:59:04 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.894
[Tue Aug  7 11:59:04 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.86"
[Tue Aug  7 12:16:06 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Aug  7 12:16:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src3.csv
[Tue Aug  7 12:16:06 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Aug  7 12:16:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src3.csv
[Tue Aug  7 12:16:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 12:16:06 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Aug  7 12:16:06 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Aug  7 12:16:06 2012] Fit fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Aug  7 12:41:16 2012] Spatial fit model total counts = 94.878500, observed total counts = 87.000000
[Tue Aug  7 12:41:16 2012] Offset between fit and detection position for source 10 = 0.418895 pixels
[Tue Aug  7 12:41:16 2012] 94.177800 total counts/ 62.757000 bgd. counts: snr = 3.966305
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.418895 pixels
  Position = (240.6, 265.3) = 13 57 45.44 -59 19 1.9
  Extent = 4.5 (2.7-6.5)", rotation angle = 0
  Source counts = 31.4 +/- 9.7
  Background counts = 62.8
  Rate = 0.002 +/- 0.0006
[Tue Aug  7 12:41:16 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:41:16 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 12:41:16 2012] Source does appear to be extended
[Tue Aug  7 12:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 12:55:51 2012] XMMSAS src. selection expression = ellipse(20879.370200, 23033.150600, 268.283142, 268.283142, 0.000000, X, Y)
[Tue Aug  7 12:55:51 2012] Writing source region out to fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src10_src.reg
[Tue Aug  7 12:55:51 2012] Extracting stamp from image fullrun_mos1_xmm0007422301_pi300-10000_cl_sm2.00.img.gz, (225, 250) - (256, 281)
[Tue Aug  7 12:55:51 2012] XMMSAS bgd. selection expression = annulus(20879.370200, 23033.150600, 447.138570, 894.277140, X, Y)
[Tue Aug  7 12:55:51 2012] Writing fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src10.gif
[Tue Aug  7 12:56:33 2012] Mean detx,y = (-1137.35, 4420.68) 
[Tue Aug  7 12:56:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 12:56:43 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 12:56:43 2012] Setting source spectrum file to fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Aug  7 12:56:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Aug  7 13:02:57 2012] Not generating rmf since there are only 31 counts
[Tue Aug  7 13:02:57 2012] rmf not generated due to insufficient counts
[Tue Aug  7 13:10:22 2012] Updating aperture counts using extracted products
[Tue Aug  7 13:10:22 2012] Error reading totcts from fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Aug  7 13:10:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 13:10:22 2012] Using photon index=1.80, rate=0.00209, arf fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src10.arf
[Tue Aug  7 13:10:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 13:10:22 2012] Updating source flux to 3.4e-14
[Tue Aug  7 13:10:25 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting