[Tue Aug  7 10:18:24 2012] Detection parameters:
  Position = (410.9, 276.9) = 13 56 8.64 -59 18 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.7 +/- 15.3
  Background counts = 4.0
  Rate = 0.02 +/- 0.002

[Tue Aug  7 10:18:24 2012] Off-axis axis estimate = 8.30'
[Tue Aug  7 10:43:10 2012] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 10:43:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 10:43:10 2012] Initial guess for spatial extent in simple fitting = 10.58"
[Tue Aug  7 10:43:10 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.047
[Tue Aug  7 10:43:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.58"
[Tue Aug  7 11:02:26 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug  7 11:02:26 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug  7 11:02:26 2012] Fit fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Aug  7 11:02:26 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug  7 11:02:26 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug  7 11:02:26 2012] Fit fullrun_mos1_xmm0007422301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug  7 11:32:29 2012] Spatial fit model total counts = 214.000000, observed total counts = 214.000000
[Tue Aug  7 11:32:29 2012] Offset between fit and detection position for source 1 = 0.342961 pixels
[Tue Aug  7 11:32:29 2012] 214.093000 total counts/ 89.093000 bgd. counts: snr = 13.243056
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.342961 pixels
  Position = (410.6, 276.9) = 13 56 8.84 -59 18 10.9
  Extent = 6.5 (5.6-7.7)", rotation angle = 0
  Source counts = 125.0 +/- 14.6
  Background counts = 89.1
  Rate = 0.008 +/- 0.001
[Tue Aug  7 11:32:29 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:32:29 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 11:32:29 2012] Source does appear to be extended
[Tue Aug  7 11:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 11:59:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 11:59:04 2012] Initial guess for spatial extent in simple fitting = 6.47"
[Tue Aug  7 11:59:04 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.013
[Tue Aug  7 11:59:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.47"
[Tue Aug  7 12:16:05 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug  7 12:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src1.csv
[Tue Aug  7 12:16:05 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug  7 12:16:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src1.csv
[Tue Aug  7 12:16:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 12:16:06 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug  7 12:16:06 2012] fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug  7 12:16:06 2012] Fit fullrun_mos1_xmm0007422301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug  7 12:41:16 2012] Spatial fit model total counts = 192.999000, observed total counts = 193.000000
[Tue Aug  7 12:41:16 2012] Offset between fit and detection position for source 1 = 0.039190 pixels
[Tue Aug  7 12:41:16 2012] 193.069300 total counts/ 71.290300 bgd. counts: snr = 14.423052
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.039190 pixels
  Position = (410.6, 276.8) = 13 56 8.83 -59 18 11.0
  Extent = 6.3 (5.4-7.6)", rotation angle = 0
  Source counts = 121.8 +/- 13.9
  Background counts = 71.3
  Rate = 0.008 +/- 0.0009
[Tue Aug  7 12:41:16 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:41:16 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 12:41:16 2012] Source does appear to be extended
[Tue Aug  7 12:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 12:55:51 2012] XMMSAS src. selection expression = ellipse(35672.692000, 24035.339960, 376.795211, 376.795211, 0.000000, X, Y)
[Tue Aug  7 12:55:51 2012] Writing source region out to fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug  7 12:55:51 2012] Extracting stamp from image fullrun_mos1_xmm0007422301_pi300-10000_cl_sm2.00.img.gz, (389, 255) - (432, 298)
[Tue Aug  7 12:55:51 2012] XMMSAS bgd. selection expression = annulus(35672.692000, 24035.339960, 627.992018, 1255.984036, X, Y)
[Tue Aug  7 12:55:51 2012] Writing fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src1.gif
[Tue Aug  7 12:55:53 2012] Mean detx,y = (4734.80, -9172.22) 
[Tue Aug  7 12:55:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 12:56:09 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 12:56:10 2012] Setting source spectrum file to fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 12:56:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug  7 13:10:22 2012] Updating aperture counts using extracted products
[Tue Aug  7 13:10:22 2012] Error reading totcts from fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 13:10:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 13:10:22 2012] Using photon index=1.80, rate=0.0081, arf fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 13:10:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 13:10:22 2012] Updating source flux to 1.8e-13
[Tue Aug  7 13:10:34 2012] Reading fit data from xmm0007422301/analysis//spectral/fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug  7 13:10:34 2012] Spectral fit parameter nH value = 5.05925e+21
[Tue Aug  7 13:10:34 2012] Spectral fit parameter PhoIndex value = 4.1907
[Tue Aug  7 13:10:34 2012] Failed to get F(0.3-8.0) from xmm0007422301/analysis//spectral/fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug  7 13:10:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 13:10:34 2012] Using Nh = 5.1e+21, photon index=4.19, rate=0.0081, arf fullrun_mos1_xmm0007422301_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 13:10:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 13:10:34 2012] Updating source flux to 1.2e-13