[Thu May 23 16:45:19 2013] Detection parameters:
  Position = (463.5, 367.2) = 13 57 17.79 -59 59 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.0 +/- 6.4
  Background counts = 2.2
  Rate = 0.002 +/- 0.0005

[Thu May 23 16:45:19 2013] Off-axis axis estimate = 12.96'
[Thu May 23 17:08:27 2013] Using EEF radius (= 12.91 ")to estimate initial spatial extent for simple fitting
[Thu May 23 17:08:27 2013] Initial guess for spatial extent in simple fitting = 12.91"
[Thu May 23 17:08:27 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.019
[Thu May 23 17:08:27 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 12.91"
[Thu May 23 17:17:07 2013] fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_src7.ximg exists
[Thu May 23 17:17:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_src7.csv
[Thu May 23 17:17:07 2013] fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu May 23 17:17:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_src7.csv
[Thu May 23 17:17:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 17:17:07 2013] fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu May 23 17:17:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu May 23 17:17:07 2013] fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu May 23 17:17:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu May 23 17:17:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007422101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 17:17:12 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.276242 pixels away
[Thu May 23 17:17:12 2013] Vigneting correction estimate = 1.000000
[Thu May 23 17:17:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 17:17:12 2013] Assessing source extent using major
[Thu May 23 17:17:12 2013] Source does appear to be extended
[Thu May 23 17:17:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 17:36:08 2013] Using EEF radius (= 12.91 ")to estimate initial spatial extent for simple fitting
[Thu May 23 17:36:08 2013] Initial guess for spatial extent in simple fitting = 12.91"
[Thu May 23 17:36:08 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.019
[Thu May 23 17:36:08 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 12.91"
[Thu May 23 17:46:20 2013] fullrun_mos2_xmm0007422101_pi300-10000_cl_pass1_src7.ximg exists
[Thu May 23 17:46:20 2013] fullrun_mos2_xmm0007422101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu May 23 17:46:20 2013] Fit fullrun_mos2_xmm0007422101_pi300-10000_cl_pass1_src7 appears to have run properly
[Thu May 23 17:46:20 2013] fullrun_mos2_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu May 23 17:46:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu May 23 17:46:20 2013] fullrun_mos2_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu May 23 17:46:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu May 23 17:46:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 17:46:25 2013] Spatial fit model total counts = 51.326000, observed total counts = 52.000000
[Thu May 23 17:46:25 2013] Offset between fit and detection position for source 1 = 3.146244 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.146244 pixels
  Position = (460.7, 368.6) = 13 57 19.41 -59 59 49.3
  Extent = 25.8 (25.8-51.6)" x 9.7 (6.5-12.5)", rotation angle = 60 (48-73) degrees
  Source counts = 50.4 +/- 7.1
  Background counts = 0.0
  Rate = 0.004 +/- 0.0006
[Thu May 23 17:46:25 2013] Vigneting correction estimate = 1.000000
[Thu May 23 17:46:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 17:46:25 2013] Assessing source extent using major axis lower bound
[Thu May 23 17:46:25 2013] Source does appear to be extended
[Thu May 23 17:46:25 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.06
[Thu May 23 17:46:25 2013] Source is asymmetric
[Thu May 23 17:59:15 2013] XMMSAS src. selection expression = ellipse(40036.629000, 32023.021800, 1549.272045, 581.077217, 60.340719, X, Y)
[Thu May 23 17:59:15 2013] Writing source region out to fullrun_mos2_xmm0007422101_pi300-10000_pass1_cl_src1_src.reg
[Thu May 23 17:59:15 2013] Extracting stamp from image fullrun_mos2_xmm0007422101_pi300-10000_cl_sm2.00.img.gz, (372, 280) - (550, 458)
[Thu May 23 17:59:15 2013] XMMSAS bgd. selection expression = annulus(40036.629000, 32023.021800, 2582.120074, 5164.240149, X, Y)
[Thu May 23 17:59:15 2013] Writing fullrun_mos2_xmm0007422101_pi300-10000_pass1_cl_src1.gif
[Thu May 23 18:00:35 2013] Mean detx,y = (16459.68, -672.34) 
[Thu May 23 18:00:36 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 18:01:13 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 18:01:13 2013] Setting source spectrum file to fullrun_mos2_xmm0007422101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 23 18:01:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0007422101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 23 18:01:41 2013] Not generating rmf since there are only 50 counts
[Thu May 23 18:01:41 2013] rmf not generated due to insufficient counts
[Thu May 23 18:02:07 2013] Updating aperture counts using extracted products
[Thu May 23 18:02:07 2013] Total counts from fullrun_mos2_xmm0007422101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 50.00
[Thu May 23 18:02:07 2013] Total counts from fullrun_mos2_xmm0007422101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 400.00
[Thu May 23 18:02:07 2013] Got source and background scale factors 1984490.000000, 30470793.000000
[Thu May 23 18:02:07 2013] User source parameters:
  Position = (460.7, 368.6) = 13 57 19.41 -59 59 49.3
  Extent = 25.8 (25.8-51.6)" x 9.7 (6.5-12.5)", rotation angle = 60 (48-73) degrees
  Source aperture counts = 23.9 +/- 8.1
  Background aperture counts = 26.1
  Rate = 0.002 +/- 0.0007

[Thu May 23 18:02:07 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 18:02:07 2013] Using photon index=1.80, rate=0.00427, arf fullrun_mos2_xmm0007422101_pi300-10000_pass1_cl_src1.arf
[Thu May 23 18:02:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 18:02:07 2013] Updating source flux to 2.6e-13
[Thu May 23 18:02:09 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 23 18:02:10 2013] xmm0007422101/analysis//spectral/fullrun_mos2_xmm0007422101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete