[Thu May 23 16:45:03 2013] Detection parameters:
  Position = (463.0, 366.8) = 13 57 18.07 -59 59 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.5 +/- 6.8
  Background counts = 2.6
  Rate = 0.002 +/- 0.0006

[Thu May 23 16:45:03 2013] Off-axis axis estimate = 12.92'
[Thu May 23 16:59:17 2013] Using EEF radius (= 12.89 ")to estimate initial spatial extent for simple fitting
[Thu May 23 16:59:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 16:59:17 2013] Initial guess for spatial extent in simple fitting = 12.89"
[Thu May 23 16:59:17 2013] source mask rpix=3.0, npix_max = 47, mask sum = 46, frac = 0.959
[Thu May 23 16:59:17 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.89"
[Thu May 23 17:08:27 2013] fullrun_mos1_xmm0007422101_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 23 17:08:27 2013] fullrun_mos1_xmm0007422101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 23 17:08:27 2013] Fit fullrun_mos1_xmm0007422101_pi300-10000_cl_pass0_src5 appears to have run properly
[Thu May 23 17:08:27 2013] fullrun_mos1_xmm0007422101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 23 17:08:27 2013] fullrun_mos1_xmm0007422101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 23 17:08:27 2013] Fit fullrun_mos1_xmm0007422101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu May 23 17:17:11 2013] Spatial fit model total counts = 46.716900, observed total counts = 43.000000
[Thu May 23 17:17:11 2013] Offset between fit and detection position for source 2 = 0.173368 pixels
[Thu May 23 17:17:11 2013] 45.945500 total counts/ 26.957400 bgd. counts: snr = 3.657148
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.173368 pixels
  Position = (463.1, 366.7) = 13 57 18.03 -59 59 57.8
  Extent = 7.5 (5.1-11.9)" x 3.4 (3.2-6.4)", rotation angle = 53 (118-328) degrees
  Source counts = 19.0 +/- 6.8
  Background counts = 27.0
  Rate = 0.002 +/- 0.0006
[Thu May 23 17:17:11 2013] Vigneting correction estimate = 1.000000
[Thu May 23 17:17:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 17:17:11 2013] Assessing source extent using major axis lower bound
[Thu May 23 17:17:11 2013] Source does appear to be extended
[Thu May 23 17:17:11 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.80
[Thu May 23 17:28:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 23 17:28:53 2013] Initial guess for spatial extent in simple fitting = 5.42"
[Thu May 23 17:28:53 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.984
[Thu May 23 17:28:53 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 5.42"
[Thu May 23 17:36:08 2013] fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 23 17:36:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_src5.csv
[Thu May 23 17:36:08 2013] fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 23 17:36:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_src5.csv
[Thu May 23 17:36:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 17:36:08 2013] fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 23 17:36:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 23 17:36:08 2013] fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 23 17:36:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 23 17:36:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007422101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 17:46:24 2013] Warning, spatial fit 5 centroid is now closest to src. 6
[Thu May 23 17:46:24 2013] Source 5 in spatial fitting is no longer close to this source
[Thu May 23 17:46:24 2013] Vigneting correction estimate = 1.000000
[Thu May 23 17:46:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 17:46:24 2013] Assessing source extent using major axis lower bound
[Thu May 23 17:46:24 2013] Source does appear to be extended
[Thu May 23 17:46:24 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.80
[Thu May 23 17:57:06 2013] XMMSAS src. selection expression = ellipse(40242.465560, 31853.228400, 448.020613, 202.342206, 53.059957, X, Y)
[Thu May 23 17:57:06 2013] Writing source region out to fullrun_mos1_xmm0007422101_pi300-10000_pass1_cl_src2_src.reg
[Thu May 23 17:57:06 2013] Extracting stamp from image fullrun_mos1_xmm0007422101_pi300-10000_cl_sm2.00.img.gz, (437, 341) - (489, 392)
[Thu May 23 17:57:06 2013] XMMSAS bgd. selection expression = annulus(40242.465560, 31853.228400, 746.701021, 1493.402043, X, Y)
[Thu May 23 17:57:06 2013] Writing fullrun_mos1_xmm0007422101_pi300-10000_pass1_cl_src2.gif
[Thu May 23 17:58:05 2013] Mean detx,y = (-260.71, -16817.43) 
[Thu May 23 17:58:06 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 17:58:22 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 17:58:23 2013] Setting source spectrum file to fullrun_mos1_xmm0007422101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 23 17:58:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0007422101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 23 17:59:06 2013] Not generating rmf since there are only 18 counts
[Thu May 23 17:59:06 2013] rmf not generated due to insufficient counts
[Thu May 23 18:02:06 2013] Updating aperture counts using extracted products
[Thu May 23 18:02:06 2013] Total counts from fullrun_mos1_xmm0007422101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 21.00
[Thu May 23 18:02:06 2013] Total counts from fullrun_mos1_xmm0007422101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 37.00
[Thu May 23 18:02:06 2013] Got source and background scale factors 286400.000000, 3203375.000000
[Thu May 23 18:02:06 2013] User source parameters:
  Position = (463.1, 366.7) = 13 57 18.03 -59 59 57.8
  Extent = 7.5 (5.1-11.9)" x 3.4 (3.2-6.4)", rotation angle = 53 (118-328) degrees
  Source aperture counts = 17.7 +/- 5.7
  Background aperture counts = 3.3
  Rate = 0.002 +/- 0.0005

[Thu May 23 18:02:06 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 18:02:06 2013] Using photon index=1.80, rate=0.00161, arf fullrun_mos1_xmm0007422101_pi300-10000_pass1_cl_src2.arf
[Thu May 23 18:02:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 18:02:06 2013] Updating source flux to 1.3e-13
[Thu May 23 18:02:08 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 23 18:02:09 2013] xmm0007422101/analysis//spectral/fullrun_mos1_xmm0007422101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete