[Thu Jul  5 10:07:53 2012] Detection parameters:
  Position = (346.3, 143.8) = 14 0 54.80 -60 36 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.7 +/- 10.2
  Background counts = 5.2
  Rate = 0.009 +/- 0.001

[Thu Jul  5 10:07:53 2012] Off-axis axis estimate = 11.73'
[Thu Jul  5 10:09:07 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 10:09:07 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Thu Jul  5 10:09:07 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.107
[Thu Jul  5 10:09:07 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.30"
[Thu Jul  5 10:20:25 2012] fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jul  5 10:20:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_src9.csv
[Thu Jul  5 10:20:25 2012] fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jul  5 10:20:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_src9.csv
[Thu Jul  5 10:20:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 10:20:25 2012] fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jul  5 10:20:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jul  5 10:20:25 2012] fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jul  5 10:20:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jul  5 10:20:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0007422001_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 10:36:58 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.872623 pixels away
[Thu Jul  5 10:36:58 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 10:36:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 10:36:58 2012] Assessing source extent using major
[Thu Jul  5 10:36:58 2012] Source does appear to be extended
[Thu Jul  5 10:36:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 10:37:05 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 10:37:05 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Thu Jul  5 10:37:05 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.107
[Thu Jul  5 10:37:05 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 12.30"
[Thu Jul  5 10:48:18 2012] fullrun_pn_xmm0007422001_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jul  5 10:48:18 2012] fullrun_pn_xmm0007422001_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jul  5 10:48:18 2012] Fit fullrun_pn_xmm0007422001_pi300-10000_cl_pass1_src9 appears to have run properly
[Thu Jul  5 10:48:18 2012] fullrun_pn_xmm0007422001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jul  5 10:48:18 2012] fullrun_pn_xmm0007422001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jul  5 10:48:18 2012] Fit fullrun_pn_xmm0007422001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jul  5 11:04:36 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 36.181948 pixels away
[Thu Jul  5 11:04:36 2012] Spatial fit model total counts = 119.365000, observed total counts = 110.000000
[Thu Jul  5 11:04:36 2012] Offset between fit and detection position for source 9 = 0.126633 pixels
[Thu Jul  5 11:04:36 2012] 120.287800 total counts/ 68.685500 bgd. counts: snr = 6.226393
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.126633 pixels
  Position = (346.2, 143.7) = 14 0 54.85 -60 36 57.3
  Extent = 9.5 (6.7-12.4)" x 4.5 (3.1-6.1)", rotation angle = 309 (292-328) degrees
  Source counts = 51.6 +/- 11.0
  Background counts = 68.7
  Rate = 0.007 +/- 0.001
[Thu Jul  5 11:04:36 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 11:04:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 11:04:36 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 11:04:36 2012] Source does appear to be extended
[Thu Jul  5 11:04:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Thu Jul  5 11:04:43 2012] XMMSAS src. selection expression = ellipse(30071.298600, 12454.957400, 569.013016, 268.604408, 308.642283, X, Y)
[Thu Jul  5 11:04:43 2012] Writing source region out to fullrun_pn_xmm0007422001_pi300-10000_pass1_cl_src9_src.reg
[Thu Jul  5 11:04:43 2012] Extracting stamp from image fullrun_pn_xmm0007422001_pi300-10000_cl_sm2.00.img.gz, (314, 111) - (379, 176)
[Thu Jul  5 11:04:43 2012] XMMSAS bgd. selection expression = annulus(30071.298600, 12454.957400, 948.355027, 1896.710055, X, Y) && !ellipse(32673.787343, 13151.662301, 752.676323, 364.947076, 133.317992, X, Y)
[Thu Jul  5 11:04:43 2012] Writing fullrun_pn_xmm0007422001_pi300-10000_pass1_cl_src9.gif
[Thu Jul  5 11:07:55 2012] Mean detx,y = (1225.43, -12426.05) 
[Thu Jul  5 11:07:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 11:08:15 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 11:08:16 2012] Setting source spectrum file to fullrun_pn_xmm0007422001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jul  5 11:08:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0007422001_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jul  5 11:09:39 2012] Not generating rmf since there are only 51 counts
[Thu Jul  5 11:09:39 2012] rmf not generated due to insufficient counts
[Thu Jul  5 11:13:32 2012] Updating aperture counts using extracted products
[Thu Jul  5 11:13:32 2012] Error reading totcts from fullrun_pn_xmm0007422001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jul  5 11:13:32 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 11:13:32 2012] Using photon index=1.80, rate=0.00679, arf fullrun_pn_xmm0007422001_pi300-10000_pass1_cl_src9.arf
[Thu Jul  5 11:13:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 11:13:32 2012] Getting flux using calc_pl_flux failed
[Thu Jul  5 11:13:35 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jul  5 11:13:36 2012] xmm0007422001/analysis//spectral/fullrun_pn_xmm0007422001_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete