[Thu Jul  5 10:08:10 2012] Detection parameters:
  Position = (117.1, 322.6) = 14 3 9.57 -60 23 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.9 +/- 6.1
  Background counts = 2.4
  Rate = 0.002 +/- 0.0006

[Thu Jul  5 10:08:10 2012] Off-axis axis estimate = 13.27'
[Thu Jul  5 10:20:25 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 10:20:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 10:20:25 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Thu Jul  5 10:20:25 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998
[Thu Jul  5 10:20:25 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.06"
[Thu Jul  5 10:27:42 2012] fullrun_mos1_xmm0007422001_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jul  5 10:27:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422001_pi300-10000_cl_pass0_src4.csv
[Thu Jul  5 10:27:42 2012] fullrun_mos1_xmm0007422001_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jul  5 10:27:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422001_pi300-10000_cl_pass0_src4.csv
[Thu Jul  5 10:27:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007422001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007422001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 10:27:42 2012] fullrun_mos1_xmm0007422001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jul  5 10:27:42 2012] fullrun_mos1_xmm0007422001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jul  5 10:27:42 2012] Fit fullrun_mos1_xmm0007422001_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Jul  5 10:36:59 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.118897 pixels away
[Thu Jul  5 10:36:59 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 10:36:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 10:36:59 2012] Assessing source extent using major
[Thu Jul  5 10:36:59 2012] Source does appear to be extended
[Thu Jul  5 10:36:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 10:48:18 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 10:48:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 10:48:18 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Thu Jul  5 10:48:18 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998
[Thu Jul  5 10:48:18 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 13.06"
[Thu Jul  5 10:55:25 2012] fullrun_mos1_xmm0007422001_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jul  5 10:55:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422001_pi300-10000_cl_pass1_src4.csv
[Thu Jul  5 10:55:25 2012] fullrun_mos1_xmm0007422001_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jul  5 10:55:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007422001_pi300-10000_cl_pass1_src4.csv
[Thu Jul  5 10:55:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007422001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007422001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 10:55:25 2012] fullrun_mos1_xmm0007422001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jul  5 10:55:25 2012] fullrun_mos1_xmm0007422001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jul  5 10:55:25 2012] Fit fullrun_mos1_xmm0007422001_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Jul  5 11:04:37 2012] Spatial fit model total counts = 51.143500, observed total counts = 51.000000
[Thu Jul  5 11:04:37 2012] Offset between fit and detection position for source 3 = 0.308857 pixels
[Thu Jul  5 11:04:37 2012] 50.741400 total counts/ 37.711700 bgd. counts: snr = 2.121761
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.308857 pixels
  Position = (117.3, 322.7) = 14 3 9.40 -60 23 56.3
  Extent = 3.7 (3.3-6.3)", rotation angle = 0
  Source counts = 13.0 +/- 7.1
  Background counts = 37.7
  Rate = 0.001 +/- 0.0007
[Thu Jul  5 11:04:37 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 11:04:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 11:04:37 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 11:04:37 2012] Source does appear to be extended
[Thu Jul  5 11:04:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 11:09:50 2012] XMMSAS src. selection expression = ellipse(10160.061200, 28025.652400, 224.636406, 224.636406, 0.000000, X, Y)
[Thu Jul  5 11:09:50 2012] Writing source region out to fullrun_mos1_xmm0007422001_pi300-10000_pass1_cl_src3_src.reg
[Thu Jul  5 11:09:50 2012] Extracting stamp from image fullrun_mos1_xmm0007422001_pi300-10000_cl_sm2.00.img.gz, (104, 310) - (130, 336)
[Thu Jul  5 11:09:50 2012] XMMSAS bgd. selection expression = annulus(10160.061200, 28025.652400, 374.394011, 748.788022, X, Y)
[Thu Jul  5 11:09:50 2012] Writing fullrun_mos1_xmm0007422001_pi300-10000_pass1_cl_src3.gif
[Thu Jul  5 11:10:20 2012] Mean detx,y = (-10270.40, 11827.07) 
[Thu Jul  5 11:10:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 11:10:26 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 11:10:27 2012] Setting source spectrum file to fullrun_mos1_xmm0007422001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul  5 11:10:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0007422001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jul  5 11:11:01 2012] Not generating rmf since there are only 13 counts
[Thu Jul  5 11:11:01 2012] rmf not generated due to insufficient counts
[Thu Jul  5 11:13:32 2012] Updating aperture counts using extracted products
[Thu Jul  5 11:13:32 2012] Error reading totcts from fullrun_mos1_xmm0007422001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul  5 11:13:32 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 11:13:32 2012] Using photon index=1.80, rate=0.0013, arf fullrun_mos1_xmm0007422001_pi300-10000_pass1_cl_src3.arf
[Thu Jul  5 11:13:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 11:13:32 2012] Updating source flux to 4.8e-14
[Thu Jul  5 11:13:33 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jul  5 11:13:34 2012] xmm0007422001/analysis//spectral/fullrun_mos1_xmm0007422001_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete