[Thu Jun  6 21:30:24 2013] Detection parameters:
  Position = (339.2, 202.0) = 14 2 7.81 -61 48 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.5 +/- 7.1
  Background counts = 5.7
  Rate = 0.003 +/- 0.0008

[Thu Jun  6 21:30:24 2013] Off-axis axis estimate = 7.59'
[Thu Jun  6 21:44:50 2013] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 21:44:50 2013] Initial guess for spatial extent in simple fitting = 10.22"
[Thu Jun  6 21:44:50 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.108
[Thu Jun  6 21:44:50 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 10.22"
[Thu Jun  6 21:58:43 2013] fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jun  6 21:58:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_src7.csv
[Thu Jun  6 21:58:43 2013] fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jun  6 21:58:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_src7.csv
[Thu Jun  6 21:58:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 21:58:43 2013] fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jun  6 21:58:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun  6 21:58:43 2013] fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jun  6 21:58:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun  6 21:58:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007421701_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 22:11:27 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.138304 pixels away
[Thu Jun  6 22:11:27 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 22:11:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 22:11:27 2013] Assessing source extent using major
[Thu Jun  6 22:11:27 2013] Source does appear to be extended
[Thu Jun  6 22:11:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 22:23:56 2013] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 22:23:56 2013] Initial guess for spatial extent in simple fitting = 10.22"
[Thu Jun  6 22:23:56 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.108
[Thu Jun  6 22:23:56 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.22"
[Thu Jun  6 22:32:58 2013] fullrun_mos1_xmm0007421701_pi300-10000_cl_pass1_src7.ximg exists
[Thu Jun  6 22:32:58 2013] fullrun_mos1_xmm0007421701_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Jun  6 22:32:58 2013] Fit fullrun_mos1_xmm0007421701_pi300-10000_cl_pass1_src7 appears to have run properly
[Thu Jun  6 22:32:58 2013] fullrun_mos1_xmm0007421701_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Jun  6 22:32:58 2013] fullrun_mos1_xmm0007421701_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jun  6 22:32:58 2013] Fit fullrun_mos1_xmm0007421701_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Jun  6 22:46:00 2013] Spatial fit model total counts = 61.402300, observed total counts = 63.000000
[Thu Jun  6 22:46:00 2013] Offset between fit and detection position for source 11 = 0.422842 pixels
[Thu Jun  6 22:46:00 2013] 59.195500 total counts/ 30.927300 bgd. counts: snr = 5.083082
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.422842 pixels
  Position = (338.8, 202.0) = 14 2 8.07 -61 48 22.7
  Extent = 8.4 (5.4-12.5)", rotation angle = 0
  Source counts = 28.3 +/- 7.7
  Background counts = 30.9
  Rate = 0.002 +/- 0.0006
[Thu Jun  6 22:46:00 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 22:46:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 22:46:00 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 22:46:00 2013] Source does appear to be extended
[Thu Jun  6 22:46:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 22:57:40 2013] XMMSAS src. selection expression = ellipse(29429.174620, 17526.445800, 504.256815, 504.256815, 0.000000, X, Y)
[Thu Jun  6 22:57:41 2013] Writing source region out to fullrun_mos1_xmm0007421701_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun  6 22:57:41 2013] Extracting stamp from image fullrun_mos1_xmm0007421701_pi300-10000_cl_sm2.00.img.gz, (310, 173) - (368, 231)
[Thu Jun  6 22:57:41 2013] XMMSAS bgd. selection expression = annulus(29429.174620, 17526.445800, 840.428024, 1680.856048, X, Y)
[Thu Jun  6 22:57:41 2013] Writing fullrun_mos1_xmm0007421701_pi300-10000_pass1_cl_src11.gif
[Thu Jun  6 22:59:02 2013] Mean detx,y = (7525.86, 481.39) 
[Thu Jun  6 22:59:03 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 22:59:17 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 22:59:17 2013] Setting source spectrum file to fullrun_mos1_xmm0007421701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun  6 22:59:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0007421701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun  6 23:09:52 2013] Not generating rmf since there are only 28 counts
[Thu Jun  6 23:09:52 2013] rmf not generated due to insufficient counts
[Thu Jun  6 23:18:16 2013] Updating aperture counts using extracted products
[Thu Jun  6 23:18:16 2013] Total counts from fullrun_mos1_xmm0007421701_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 44.00
[Thu Jun  6 23:18:16 2013] Total counts from fullrun_mos1_xmm0007421701_pi300-10000_pass1_cl_src11_bgd.pi.gz = 171.00
[Thu Jun  6 23:18:16 2013] Got source and background scale factors 793600.000000, 6108223.000000
[Thu Jun  6 23:18:16 2013] User source parameters:
  Position = (338.8, 202.0) = 14 2 8.07 -61 48 22.7
  Extent = 8.4 (5.4-12.5)", rotation angle = 0
  Source aperture counts = 21.8 +/- 7.7
  Background aperture counts = 22.2
  Rate = 0.002 +/- 0.0006

[Thu Jun  6 23:18:17 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 23:18:17 2013] Using photon index=1.80, rate=0.00229, arf fullrun_mos1_xmm0007421701_pi300-10000_pass1_cl_src11.arf
[Thu Jun  6 23:18:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 23:18:17 2013] Updating source flux to 6.7e-14
[Thu Jun  6 23:18:19 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun  6 23:18:22 2013] xmm0007421701/analysis//spectral/fullrun_mos1_xmm0007421701_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete