[Fri Aug 31 02:49:33 2012] Detection parameters:
  Position = (441.8, 335.3) = 13 56 44.34 -60 29 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.7 +/- 7.5
  Background counts = 5.5
  Rate = 0.003 +/- 0.0007

[Fri Aug 31 02:49:33 2012] Off-axis axis estimate = 10.73'
[Fri Aug 31 02:59:24 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 02:59:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 02:59:24 2012] Initial guess for spatial extent in simple fitting = 11.79"
[Fri Aug 31 02:59:24 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.018
[Fri Aug 31 02:59:24 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.79"
[Fri Aug 31 03:02:34 2012] fullrun_mos2_xmm0007421101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 31 03:02:34 2012] fullrun_mos2_xmm0007421101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 31 03:02:34 2012] Fit fullrun_mos2_xmm0007421101_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Aug 31 03:02:34 2012] fullrun_mos2_xmm0007421101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 31 03:02:34 2012] fullrun_mos2_xmm0007421101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 31 03:02:34 2012] Fit fullrun_mos2_xmm0007421101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 31 03:02:37 2012] Spatial fit model total counts = 80.198500, observed total counts = 80.000000
[Fri Aug 31 03:02:37 2012] Offset between fit and detection position for source 2 = 0.417621 pixels
[Fri Aug 31 03:02:37 2012] 79.308100 total counts/ 58.849600 bgd. counts: snr = 2.666871
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.417621 pixels
  Position = (441.4, 335.3) = 13 56 44.59 -60 29 38.5
  Extent = 5.9 (3.0-10.2)" x 4.3 (3.0-7.4)", rotation angle = 82 (90-90) degrees
  Source counts = 20.5 +/- 8.9
  Background counts = 58.8
  Rate = 0.002 +/- 0.0008
[Fri Aug 31 03:02:37 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 03:02:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 03:02:37 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 03:02:37 2012] Source does appear to be extended
[Fri Aug 31 03:02:37 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.41
[Fri Aug 31 03:11:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 03:11:33 2012] Initial guess for spatial extent in simple fitting = 5.12"
[Fri Aug 31 03:11:33 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.801
[Fri Aug 31 03:11:33 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.12"
[Fri Aug 31 03:14:54 2012] fullrun_mos2_xmm0007421101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 31 03:14:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007421101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 31 03:14:54 2012] fullrun_mos2_xmm0007421101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 31 03:14:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007421101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 31 03:14:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007421101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007421101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 03:14:54 2012] fullrun_mos2_xmm0007421101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 31 03:14:54 2012] fullrun_mos2_xmm0007421101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 31 03:14:54 2012] Fit fullrun_mos2_xmm0007421101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 31 03:14:56 2012] Spatial fit model total counts = 80.251100, observed total counts = 80.000000
[Fri Aug 31 03:14:56 2012] Offset between fit and detection position for source 2 = 0.088292 pixels
[Fri Aug 31 03:14:56 2012] 79.405400 total counts/ 59.365200 bgd. counts: snr = 2.600974
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.088292 pixels
  Position = (441.3, 335.2) = 13 56 44.61 -60 29 38.9
  Extent = 5.0 (2.7-7.7)", rotation angle = 0
  Source counts = 20.0 +/- 8.9
  Background counts = 59.4
  Rate = 0.002 +/- 0.0008
[Fri Aug 31 03:14:56 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 03:14:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 03:14:56 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 03:14:56 2012] Source does appear to be extended
[Fri Aug 31 03:14:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 03:17:45 2012] XMMSAS src. selection expression = ellipse(38346.518600, 29117.289400, 299.600409, 299.600409, 0.000000, X, Y)
[Fri Aug 31 03:17:45 2012] Writing source region out to fullrun_mos2_xmm0007421101_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 31 03:17:45 2012] Extracting stamp from image fullrun_mos2_xmm0007421101_pi300-10000_cl_sm2.00.img.gz, (424, 318) - (459, 352)
[Fri Aug 31 03:17:45 2012] XMMSAS bgd. selection expression = annulus(38346.518600, 29117.289400, 499.334014, 998.668029, X, Y)
[Fri Aug 31 03:17:45 2012] Writing fullrun_mos2_xmm0007421101_pi300-10000_pass1_cl_src2.gif
[Fri Aug 31 03:18:02 2012] Mean detx,y = (13528.72, 1905.38) 
[Fri Aug 31 03:18:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 03:18:06 2012] grppha failed
[Fri Aug 31 03:18:06 2012] Setting source spectrum file to fullrun_mos2_xmm0007421101_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Aug 31 03:18:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0007421101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 31 03:18:13 2012] Not generating rmf since there are only 20 counts
[Fri Aug 31 03:18:13 2012] rmf not generated due to insufficient counts
[Fri Aug 31 03:18:26 2012] Updating aperture counts using extracted products
[Fri Aug 31 03:18:26 2012] Error reading totcts from fullrun_mos2_xmm0007421101_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Aug 31 03:18:26 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 03:18:28 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 31 03:18:29 2012] xmm0007421101/analysis//spectral/fullrun_mos2_xmm0007421101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete