[Fri Aug 31 02:49:23 2012] Detection parameters:
  Position = (400.3, 217.2) = 13 57 8.47 -60 38 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.5 +/- 7.8
  Background counts = 5.6
  Rate = 0.005 +/- 0.001

[Fri Aug 31 02:49:23 2012] Off-axis axis estimate = 9.45'
[Fri Aug 31 02:54:42 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 02:54:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 02:54:42 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Fri Aug 31 02:54:42 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Fri Aug 31 02:54:42 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.15"
[Fri Aug 31 02:59:24 2012] fullrun_mos1_xmm0007421101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug 31 02:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007421101_pi300-10000_cl_pass0_src2.csv
[Fri Aug 31 02:59:24 2012] fullrun_mos1_xmm0007421101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug 31 02:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007421101_pi300-10000_cl_pass0_src2.csv
[Fri Aug 31 02:59:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007421101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007421101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 02:59:24 2012] fullrun_mos1_xmm0007421101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug 31 02:59:24 2012] fullrun_mos1_xmm0007421101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug 31 02:59:24 2012] Fit fullrun_mos1_xmm0007421101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug 31 03:02:36 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.056396 pixels away
[Fri Aug 31 03:02:36 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 03:02:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 03:02:36 2012] Assessing source extent using major
[Fri Aug 31 03:02:36 2012] Source does appear to be extended
[Fri Aug 31 03:02:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 03:07:25 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 03:07:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 03:07:25 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Fri Aug 31 03:07:25 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Fri Aug 31 03:07:25 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.15"
[Fri Aug 31 03:11:33 2012] fullrun_mos1_xmm0007421101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug 31 03:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007421101_pi300-10000_cl_pass1_src2.csv
[Fri Aug 31 03:11:33 2012] fullrun_mos1_xmm0007421101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug 31 03:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0007421101_pi300-10000_cl_pass1_src2.csv
[Fri Aug 31 03:11:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0007421101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0007421101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 03:11:33 2012] fullrun_mos1_xmm0007421101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug 31 03:11:33 2012] fullrun_mos1_xmm0007421101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug 31 03:11:33 2012] Fit fullrun_mos1_xmm0007421101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Aug 31 03:14:56 2012] Spatial fit model total counts = 88.999300, observed total counts = 89.000000
[Fri Aug 31 03:14:56 2012] Offset between fit and detection position for source 3 = 0.350706 pixels
[Fri Aug 31 03:14:56 2012] 89.628100 total counts/ 52.307300 bgd. counts: snr = 5.160239
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.350706 pixels
  Position = (400.0, 217.3) = 13 57 8.67 -60 38 12.6
  Extent = 9.9 (6.9-14.5)", rotation angle = 0
  Source counts = 37.3 +/- 9.5
  Background counts = 52.3
  Rate = 0.003 +/- 0.0009
[Fri Aug 31 03:14:56 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 03:14:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 03:14:56 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 03:14:56 2012] Source does appear to be extended
[Fri Aug 31 03:14:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 03:17:02 2012] XMMSAS src. selection expression = ellipse(34751.448985, 18857.717000, 591.491417, 591.491417, 0.000000, X, Y)
[Fri Aug 31 03:17:02 2012] Writing source region out to fullrun_mos1_xmm0007421101_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 31 03:17:02 2012] Extracting stamp from image fullrun_mos1_xmm0007421101_pi300-10000_cl_sm2.00.img.gz, (366, 183) - (434, 251)
[Fri Aug 31 03:17:02 2012] XMMSAS bgd. selection expression = annulus(34751.448985, 18857.717000, 985.819028, 1971.638057, X, Y)
[Fri Aug 31 03:17:02 2012] Writing fullrun_mos1_xmm0007421101_pi300-10000_pass1_cl_src3.gif
[Fri Aug 31 03:17:09 2012] Mean detx,y = (9147.90, -5320.31) 
[Fri Aug 31 03:17:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 03:17:19 2012] grppha failed
[Fri Aug 31 03:17:19 2012] Setting source spectrum file to fullrun_mos1_xmm0007421101_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 31 03:17:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0007421101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 31 03:17:44 2012] Not generating rmf since there are only 37 counts
[Fri Aug 31 03:17:44 2012] rmf not generated due to insufficient counts
[Fri Aug 31 03:18:26 2012] Updating aperture counts using extracted products
[Fri Aug 31 03:18:26 2012] Error reading totcts from fullrun_mos1_xmm0007421101_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 31 03:18:26 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 03:18:27 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 31 03:18:28 2012] xmm0007421101/analysis//spectral/fullrun_mos1_xmm0007421101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete