[Sun Aug 19 10:14:44 2012] Detection parameters:
  Position = (190.9, 290.8) = 13 58 24.11 -61 0 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1109.6 +/- 40.2
  Background counts = 5.8
  Rate = 0.1 +/- 0.005

[Sun Aug 19 10:14:44 2012] Off-axis axis estimate = 7.81'
[Sun Aug 19 10:42:43 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 10:42:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 10:42:43 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Sun Aug 19 10:42:43 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.088
[Sun Aug 19 10:42:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.34"
[Sun Aug 19 10:53:21 2012] fullrun_mos2_xmm0007421001_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 19 10:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007421001_pi300-10000_cl_pass0_src1.csv
[Sun Aug 19 10:53:21 2012] fullrun_mos2_xmm0007421001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 19 10:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007421001_pi300-10000_cl_pass0_src1.csv
[Sun Aug 19 10:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007421001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007421001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 10:53:21 2012] fullrun_mos2_xmm0007421001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 19 10:53:21 2012] fullrun_mos2_xmm0007421001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 19 10:53:21 2012] Fit fullrun_mos2_xmm0007421001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 19 10:53:29 2012] Spatial fit model total counts = 1009.190000, observed total counts = 1006.000000
[Sun Aug 19 10:53:29 2012] Offset between fit and detection position for source 1 = 0.168312 pixels
[Sun Aug 19 10:53:29 2012] 1014.523000 total counts/ 214.542000 bgd. counts: snr = 54.616455
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.168312 pixels
  Position = (191.0, 290.7) = 13 58 24.08 -61 0 10.4
  Extent = 6.0 (5.7-6.4)", rotation angle = 0
  Source counts = 800.0 +/- 31.9
  Background counts = 214.5
  Rate = 0.07 +/- 0.003
[Sun Aug 19 10:53:29 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 10:53:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 10:53:29 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 10:53:29 2012] Source does appear to be extended
[Sun Aug 19 10:53:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 11:19:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 11:19:29 2012] Initial guess for spatial extent in simple fitting = 6.03"
[Sun Aug 19 11:19:29 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.124
[Sun Aug 19 11:19:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.03"
[Sun Aug 19 11:28:48 2012] fullrun_mos2_xmm0007421001_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 19 11:28:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0007421001_pi300-10000_cl_pass1_src1.csv
[Sun Aug 19 11:28:48 2012] fullrun_mos2_xmm0007421001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 19 11:28:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0007421001_pi300-10000_cl_pass1_src1.csv
[Sun Aug 19 11:28:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007421001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007421001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 11:28:48 2012] fullrun_mos2_xmm0007421001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 19 11:28:48 2012] fullrun_mos2_xmm0007421001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 19 11:28:48 2012] Fit fullrun_mos2_xmm0007421001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug 19 11:28:57 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Sun Aug 19 11:28:57 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 11:28:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 11:28:57 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 11:28:57 2012] Source does appear to be extended
[Sun Aug 19 11:28:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 11:43:54 2012] XMMSAS src. selection expression = ellipse(16568.068800, 25240.421200, 361.790410, 361.790410, 0.000000, X, Y)
[Sun Aug 19 11:43:54 2012] Writing source region out to fullrun_mos2_xmm0007421001_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug 19 11:43:54 2012] Extracting stamp from image fullrun_mos2_xmm0007421001_pi300-10000_cl_sm2.00.img.gz, (170, 270) - (212, 311)
[Sun Aug 19 11:43:54 2012] XMMSAS bgd. selection expression = annulus(16568.068800, 25240.421200, 602.984017, 1205.968035, X, Y)
[Sun Aug 19 11:43:54 2012] Writing fullrun_mos2_xmm0007421001_pi300-10000_pass1_cl_src1.gif
[Sun Aug 19 11:43:57 2012] Mean detx,y = (-7545.27, -5023.97) 
[Sun Aug 19 11:43:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 11:44:12 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 11:44:12 2012] Setting source spectrum file to fullrun_mos2_xmm0007421001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 19 11:44:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0007421001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug 19 11:52:30 2012] Updating aperture counts using extracted products
[Sun Aug 19 11:52:30 2012] Error reading totcts from fullrun_mos2_xmm0007421001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 19 11:52:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 11:52:30 2012] Using photon index=1.80, rate=0.0706, arf fullrun_mos2_xmm0007421001_pi300-10000_pass1_cl_src1.arf
[Sun Aug 19 11:52:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 11:52:30 2012] Updating source flux to 1.2e-12
[Sun Aug 19 11:52:41 2012] Reading fit data from xmm0007421001/analysis//spectral/fullrun_mos2_xmm0007421001_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug 19 11:52:41 2012] Spectral fit parameter nH value = 2.07524e+21
[Sun Aug 19 11:52:41 2012] Spectral fit parameter PhoIndex value = 3.35208
[Sun Aug 19 11:52:41 2012] Failed to get F(0.3-8.0) from xmm0007421001/analysis//spectral/fullrun_mos2_xmm0007421001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug 19 11:52:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 11:52:41 2012] Using Nh = 2.1e+21, photon index=3.35, rate=0.0706, arf fullrun_mos2_xmm0007421001_pi300-10000_pass1_cl_src1.arf
[Sun Aug 19 11:52:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 11:52:41 2012] Updating source flux to 8.7e-13