[Mon Jul  2 22:45:07 2012] Detection parameters:
  Position = (262.8, 183.6) = 14 0 17.62 -61 28 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.9 +/- 9.6
  Background counts = 20.7
  Rate = 0.006 +/- 0.001

[Mon Jul  2 22:45:07 2012] Off-axis axis estimate = 8.72'
[Mon Jul  2 22:53:51 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 22:53:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  2 22:53:51 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Mon Jul  2 22:53:51 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.844
[Mon Jul  2 22:53:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.79"
[Mon Jul  2 22:59:12 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul  2 22:59:12 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul  2 22:59:12 2012] Fit fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Jul  2 22:59:12 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul  2 22:59:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  2 22:59:12 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul  2 22:59:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  2 22:59:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 22:59:14 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.705589 pixels away
[Mon Jul  2 22:59:14 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 22:59:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 22:59:14 2012] Assessing source extent using major
[Mon Jul  2 22:59:14 2012] Source does appear to be extended
[Mon Jul  2 22:59:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 23:06:10 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 23:06:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  2 23:06:10 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Mon Jul  2 23:06:10 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.844
[Mon Jul  2 23:06:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.79"
[Mon Jul  2 23:10:49 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul  2 23:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_src1.csv
[Mon Jul  2 23:10:49 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul  2 23:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_src1.csv
[Mon Jul  2 23:10:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 23:10:49 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul  2 23:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul  2 23:10:49 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul  2 23:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul  2 23:10:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007420901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 23:10:51 2012] Spatial fit model total counts = 331.019000, observed total counts = 287.000000
[Mon Jul  2 23:10:51 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul  2 23:10:51 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 23:10:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 23:10:51 2012] Assessing source extent using major
[Mon Jul  2 23:10:51 2012] Source does appear to be extended
[Mon Jul  2 23:10:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 23:14:50 2012] XMMSAS src. selection expression = ellipse(22816.705231, 15920.435226, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  2 23:14:50 2012] Writing source region out to fullrun_mos2_xmm0007420901_pi300-10000_pass1_cl_src4_src.reg
[Mon Jul  2 23:14:50 2012] Extracting stamp from image fullrun_mos2_xmm0007420901_pi300-10000_cl_sm2.00.img.gz, (225, 146) - (300, 221)
[Mon Jul  2 23:14:50 2012] XMMSAS bgd. selection expression = annulus(22816.705231, 15920.435226, 1087.500000, 2175.000000, X, Y)
[Mon Jul  2 23:14:50 2012] Writing fullrun_mos2_xmm0007420901_pi300-10000_pass1_cl_src4.gif
[Mon Jul  2 23:14:52 2012] Mean detx,y = (-6866.12, 5110.82) 
[Mon Jul  2 23:14:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 23:15:06 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 23:15:06 2012] Setting source spectrum file to fullrun_mos2_xmm0007420901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jul  2 23:15:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0007420901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Jul  2 23:15:52 2012] Not generating rmf since there are only 46 counts
[Mon Jul  2 23:15:52 2012] rmf not generated due to insufficient counts
[Mon Jul  2 23:16:36 2012] Updating aperture counts using extracted products
[Mon Jul  2 23:16:36 2012] Error reading totcts from fullrun_mos2_xmm0007420901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jul  2 23:16:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 23:16:36 2012] Using photon index=1.80, rate=0.00567, arf fullrun_mos2_xmm0007420901_pi300-10000_pass1_cl_src4.arf
[Mon Jul  2 23:16:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 23:16:36 2012] Updating source flux to 1.1e-13
[Mon Jul  2 23:16:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  2 23:16:38 2012] xmm0007420901/analysis//spectral/fullrun_mos2_xmm0007420901_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete