[Mon Jul  2 22:45:07 2012] Detection parameters:
  Position = (188.1, 257.4) = 14 1 2.84 -61 23 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.9 +/- 10.7
  Background counts = 20.8
  Rate = 0.005 +/- 0.001

[Mon Jul  2 22:45:07 2012] Off-axis axis estimate = 8.54'
[Mon Jul  2 22:53:51 2012] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 22:53:51 2012] Initial guess for spatial extent in simple fitting = 10.70"
[Mon Jul  2 22:53:51 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.028
[Mon Jul  2 22:53:51 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.70"
[Mon Jul  2 22:59:12 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jul  2 22:59:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_src3.csv
[Mon Jul  2 22:59:12 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jul  2 22:59:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_src3.csv
[Mon Jul  2 22:59:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 22:59:12 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jul  2 22:59:12 2012] fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jul  2 22:59:12 2012] Fit fullrun_mos2_xmm0007420901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jul  2 22:59:14 2012] Spatial fit model total counts = 228.950000, observed total counts = 227.000000
[Mon Jul  2 22:59:14 2012] Offset between fit and detection position for source 3 = 0.575596 pixels
[Mon Jul  2 22:59:14 2012] 229.951200 total counts/ 211.324000 bgd. counts: snr = 1.281366
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.575596 pixels
  Position = (187.9, 256.8) = 14 1 2.95 -61 23 34.0
  Extent = 2.7" x 2.7", rotation angle = 0
  Source counts = 18.6 +/- 15.2
  Background counts = 211.3
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability