[Wed Jul 25 10:05:51 2012] Detection parameters:
  Position = (162.2, 208.9) = 14 0 30.77 -61 54 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 716.5 +/- 31.6
  Background counts = 10.4
  Rate = 0.06 +/- 0.003

[Wed Jul 25 10:05:52 2012] Off-axis axis estimate = 11.82'
[Wed Jul 25 10:08:01 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 10:08:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 25 10:08:01 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Wed Jul 25 10:08:01 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.943
[Wed Jul 25 10:08:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.34"
[Wed Jul 25 10:28:50 2012] fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 25 10:28:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 10:28:50 2012] fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 25 10:28:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 10:28:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 10:28:50 2012] fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 25 10:28:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 25 10:28:50 2012] fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 25 10:28:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 25 10:28:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 10:58:35 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.273969 pixels away
[Wed Jul 25 10:58:35 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 10:58:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 10:58:35 2012] Assessing source extent using major
[Wed Jul 25 10:58:35 2012] Source does appear to be extended
[Wed Jul 25 10:58:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 10:58:47 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 10:58:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 25 10:58:47 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Wed Jul 25 10:58:47 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.943
[Wed Jul 25 10:58:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.34"
[Wed Jul 25 11:18:39 2012] fullrun_pn_xmm0007420801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 25 11:18:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007420801_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 11:18:39 2012] fullrun_pn_xmm0007420801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 25 11:18:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0007420801_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 11:18:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0007420801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0007420801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 11:18:39 2012] fullrun_pn_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 25 11:18:39 2012] fullrun_pn_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 25 11:18:39 2012] Fit fullrun_pn_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 25 11:43:48 2012] Spatial fit model total counts = 949.882000, observed total counts = 873.000000
[Wed Jul 25 11:43:48 2012] Offset between fit and detection position for source 1 = 0.159213 pixels
[Wed Jul 25 11:43:48 2012] 950.150000 total counts/ 400.758000 bgd. counts: snr = 27.443609
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.159213 pixels
  Position = (162.3, 208.7) = 14 0 30.71 -61 54 25.7
  Extent = 6.3 (5.8-6.8)", rotation angle = 0
  Source counts = 549.4 +/- 30.8
  Background counts = 400.8
  Rate = 0.04 +/- 0.003
[Wed Jul 25 11:43:48 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 11:43:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 11:43:48 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 11:43:48 2012] Source does appear to be extended
[Wed Jul 25 11:43:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 11:43:56 2012] XMMSAS src. selection expression = ellipse(14070.853200, 18112.735600, 375.307811, 375.307811, 0.000000, X, Y)
[Wed Jul 25 11:43:56 2012] Writing source region out to fullrun_pn_xmm0007420801_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 25 11:43:56 2012] Extracting stamp from image fullrun_pn_xmm0007420801_pi300-10000_cl_sm2.00.img.gz, (141, 187) - (184, 230)
[Wed Jul 25 11:43:56 2012] XMMSAS bgd. selection expression = annulus(14070.853200, 18112.735600, 625.513018, 1251.026036, X, Y)
[Wed Jul 25 11:43:56 2012] Writing fullrun_pn_xmm0007420801_pi300-10000_pass1_cl_src1.gif
[Wed Jul 25 11:44:04 2012] Mean detx,y = (12990.94, -488.65) 
[Wed Jul 25 11:44:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 11:44:29 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 11:44:30 2012] Setting source spectrum file to fullrun_pn_xmm0007420801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 11:44:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0007420801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 25 12:21:59 2012] Updating aperture counts using extracted products
[Wed Jul 25 12:21:59 2012] Error reading totcts from fullrun_pn_xmm0007420801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 12:22:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 12:22:00 2012] Using photon index=1.80, rate=0.0446, arf fullrun_pn_xmm0007420801_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 12:22:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 12:22:00 2012] Updating source flux to 2.6e-13
[Wed Jul 25 12:23:18 2012] Reading fit data from xmm0007420801/analysis//spectral/fullrun_pn_xmm0007420801_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 25 12:23:18 2012] Spectral fit parameter nH value = 1.2165e+22
[Wed Jul 25 12:23:18 2012] Spectral fit parameter PhoIndex value = 9.97199
[Wed Jul 25 12:23:18 2012] Failed to get F(0.3-8.0) from xmm0007420801/analysis//spectral/fullrun_pn_xmm0007420801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 25 12:23:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 12:23:18 2012] Using Nh = 1.2e+22, photon index=9.97, rate=0.0446, arf fullrun_pn_xmm0007420801_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 12:23:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 12:23:18 2012] Updating source flux to 1.5e-13