[Wed Jul 25 10:06:43 2012] Detection parameters:
  Position = (277.3, 290.1) = 13 59 19.87 -61 48 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.0 +/- 9.9
  Background counts = 4.9
  Rate = 0.005 +/- 0.0009

[Wed Jul 25 10:06:43 2012] Off-axis axis estimate = 1.65'
[Wed Jul 25 10:40:33 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 10:40:33 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Jul 25 10:40:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.798
[Wed Jul 25 10:40:33 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.25"
[Wed Jul 25 10:58:30 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul 25 10:58:30 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul 25 10:58:30 2012] Fit fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_src4 appears to have run properly
[Wed Jul 25 10:58:30 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul 25 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul 25 10:58:30 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul 25 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul 25 10:58:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 10:58:39 2012] Source 6 is offset by -6.413164 and -7.566759 pixels which is larger than
2 X fitted extent = 0.833752 x 0.833752, not incorporating fit results
[Wed Jul 25 10:58:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 10:58:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 10:58:39 2012] Assessing source extent using major
[Wed Jul 25 10:58:39 2012] Source does appear to be extended
[Wed Jul 25 10:58:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 11:28:27 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 11:28:27 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Jul 25 11:28:27 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.798
[Wed Jul 25 11:28:27 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.25"
[Wed Jul 25 11:43:45 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul 25 11:43:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src4.csv
[Wed Jul 25 11:43:45 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul 25 11:43:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src4.csv
[Wed Jul 25 11:43:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 11:43:45 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul 25 11:43:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jul 25 11:43:45 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul 25 11:43:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jul 25 11:43:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 11:43:51 2012] Spatial fit model total counts = 119.815000, observed total counts = 139.000000
[Wed Jul 25 11:43:51 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 11:43:51 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 11:43:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 11:43:51 2012] Assessing source extent using major
[Wed Jul 25 11:43:51 2012] Source does appear to be extended
[Wed Jul 25 11:43:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 12:15:00 2012] XMMSAS src. selection expression = ellipse(24072.844727, 25190.481964, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 12:15:00 2012] Writing source region out to fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src6_src.reg
[Wed Jul 25 12:15:00 2012] Extracting stamp from image fullrun_mos2_xmm0007420801_pi300-10000_cl_sm2.00.img.gz, (240, 253) - (315, 328)
[Wed Jul 25 12:15:00 2012] XMMSAS bgd. selection expression = annulus(24072.844727, 25190.481964, 1087.500000, 2175.000000, X, Y)
[Wed Jul 25 12:15:00 2012] Writing fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src6.gif
[Wed Jul 25 12:15:31 2012] Mean detx,y = (-808.42, -1839.26) 
[Wed Jul 25 12:15:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:15:41 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:15:41 2012] Setting source spectrum file to fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul 25 12:15:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jul 25 12:21:12 2012] Not generating rmf since there are only 58 counts
[Wed Jul 25 12:21:12 2012] rmf not generated due to insufficient counts
[Wed Jul 25 12:22:00 2012] Updating aperture counts using extracted products
[Wed Jul 25 12:22:01 2012] Error reading totcts from fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul 25 12:22:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 12:22:01 2012] Using photon index=1.80, rate=0.00537, arf fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src6.arf
[Wed Jul 25 12:22:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 12:22:01 2012] Updating source flux to 6.3e-14
[Wed Jul 25 12:22:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting