[Wed Jul 25 10:06:43 2012] Detection parameters:
  Position = (364.1, 448.5) = 13 58 26.83 -61 37 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.0 +/- 7.6
  Background counts = 3.5
  Rate = 0.003 +/- 0.0006

[Wed Jul 25 10:06:43 2012] Off-axis axis estimate = 11.87'
[Wed Jul 25 10:40:33 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 10:40:33 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Wed Jul 25 10:40:33 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Wed Jul 25 10:40:34 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.36"
[Wed Jul 25 10:58:30 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jul 25 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_src7.csv
[Wed Jul 25 10:58:30 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jul 25 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_src7.csv
[Wed Jul 25 10:58:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 10:58:30 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jul 25 10:58:30 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jul 25 10:58:30 2012] Fit fullrun_mos2_xmm0007420801_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Jul 25 10:58:39 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.413421 pixels away
[Wed Jul 25 10:58:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 10:58:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 10:58:39 2012] Assessing source extent using major
[Wed Jul 25 10:58:39 2012] Source does appear to be extended
[Wed Jul 25 10:58:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 11:28:27 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 11:28:27 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Wed Jul 25 11:28:27 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Wed Jul 25 11:28:27 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.36"
[Wed Jul 25 11:43:45 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jul 25 11:43:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src7.csv
[Wed Jul 25 11:43:45 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jul 25 11:43:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src7.csv
[Wed Jul 25 11:43:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 11:43:45 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jul 25 11:43:45 2012] fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jul 25 11:43:45 2012] Fit fullrun_mos2_xmm0007420801_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jul 25 11:43:51 2012] Spatial fit model total counts = 76.143200, observed total counts = 76.000000
[Wed Jul 25 11:43:51 2012] Offset between fit and detection position for source 3 = 0.461341 pixels
[Wed Jul 25 11:43:51 2012] 75.074100 total counts/ 40.779000 bgd. counts: snr = 5.370488
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.461341 pixels
  Position = (364.5, 448.6) = 13 58 26.57 -61 37 3.6
  Extent = 8.9 (4.0-12.7)", rotation angle = 0
  Source counts = 34.3 +/- 8.7
  Background counts = 40.8
  Rate = 0.003 +/- 0.0007
[Wed Jul 25 11:43:51 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 11:43:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 11:43:51 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 11:43:51 2012] Source does appear to be extended
[Wed Jul 25 11:43:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 12:15:00 2012] XMMSAS src. selection expression = ellipse(31663.102000, 38980.994200, 534.174615, 534.174615, 0.000000, X, Y)
[Wed Jul 25 12:15:00 2012] Writing source region out to fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src3_src.reg
[Wed Jul 25 12:15:00 2012] Extracting stamp from image fullrun_mos2_xmm0007420801_pi300-10000_cl_sm2.00.img.gz, (334, 418) - (395, 479)
[Wed Jul 25 12:15:00 2012] XMMSAS bgd. selection expression = annulus(31663.102000, 38980.994200, 890.291026, 1780.582051, X, Y)
[Wed Jul 25 12:15:00 2012] Writing fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src3.gif
[Wed Jul 25 12:16:17 2012] Mean detx,y = (11915.19, -11051.00) 
[Wed Jul 25 12:16:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:16:34 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:16:34 2012] Setting source spectrum file to fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul 25 12:16:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jul 25 12:21:30 2012] Not generating rmf since there are only 34 counts
[Wed Jul 25 12:21:30 2012] rmf not generated due to insufficient counts
[Wed Jul 25 12:22:01 2012] Updating aperture counts using extracted products
[Wed Jul 25 12:22:01 2012] Error reading totcts from fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul 25 12:22:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 12:22:01 2012] Using photon index=1.80, rate=0.00264, arf fullrun_mos2_xmm0007420801_pi300-10000_pass1_cl_src3.arf
[Wed Jul 25 12:22:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 12:22:01 2012] Updating source flux to 8.4e-14
[Wed Jul 25 12:22:31 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting