[Sat May  4 01:08:26 2013] Detection parameters:
  Position = (268.4, 286.0) = 22 42 42.73 29 43 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.6 +/- 23.7
  Background counts = 40.7
  Rate = 0.01 +/- 0.002

[Sat May  4 01:08:26 2013] Off-axis axis estimate = 2.36'
[Sat May  4 01:34:56 2013] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Sat May  4 01:34:56 2013] Initial guess for spatial extent in simple fitting = 7.61"
[Sat May  4 01:34:56 2013] source mask rpix=1.7, npix_max = 20, mask sum = 15, frac = 0.742
[Sat May  4 01:34:56 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.61"
[Sat May  4 02:13:26 2013] fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_src4.ximg exists
[Sat May  4 02:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_src4.csv
[Sat May  4 02:13:26 2013] fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat May  4 02:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_src4.csv
[Sat May  4 02:13:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 02:13:26 2013] fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat May  4 02:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May  4 02:13:26 2013] fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat May  4 02:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May  4 02:13:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 02:13:33 2013] Source 4 is offset by -7.516658 and 0.492479 pixels which is larger than
2 X fitted extent = 3.937058 x 3.937058, not incorporating fit results
[Sat May  4 02:13:33 2013] Warning, spatial fit 4 centroid is now closest to src. 3
[Sat May  4 02:13:33 2013] Vigneting correction estimate = 1.000000
[Sat May  4 02:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 02:13:33 2013] Assessing source extent using major
[Sat May  4 02:13:33 2013] Source does appear to be extended
[Sat May  4 02:13:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 02:13:33 2013] Deleting source due to low Poisson probability 0.8