[Sat May  4 01:08:09 2013] Detection parameters:
  Position = (235.1, 461.9) = 22 42 53.90 29 56 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.6 +/- 12.4
  Background counts = 24.8
  Rate = 0.006 +/- 0.001

[Sat May  4 01:08:09 2013] Off-axis axis estimate = 12.71'
[Sat May  4 01:30:16 2013] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Sat May  4 01:30:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 01:30:16 2013] Initial guess for spatial extent in simple fitting = 12.78"
[Sat May  4 01:30:16 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.036
[Sat May  4 01:30:16 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.78"
[Sat May  4 01:34:55 2013] fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_src3.ximg exists
[Sat May  4 01:34:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_src3.csv
[Sat May  4 01:34:55 2013] fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May  4 01:34:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_src3.csv
[Sat May  4 01:34:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 01:34:56 2013] fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May  4 01:34:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May  4 01:34:56 2013] fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May  4 01:34:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May  4 01:34:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0006810301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 02:13:31 2013] Spatial fit model total counts = 108.475000, observed total counts = 96.000000
[Sat May  4 02:13:31 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 02:13:31 2013] Vigneting correction estimate = 1.000000
[Sat May  4 02:13:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 02:13:31 2013] Assessing source extent using major
[Sat May  4 02:13:31 2013] Source does appear to be extended
[Sat May  4 02:13:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 02:13:31 2013] Deleting source due to low Poisson probability 0.8