[Thu Jun 14 10:11:34 2012] Detection parameters:
  Position = (278.1, 287.1) = 22 42 39.37 29 43 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94255.6 +/- 363.0
  Background counts = 5.2
  Rate = 1e+01 +/- 0.05

[Thu Jun 14 10:11:34 2012] Off-axis axis estimate = 1.69'
[Thu Jun 14 10:36:15 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:36:15 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Jun 14 10:36:15 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Thu Jun 14 10:36:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Thu Jun 14 11:13:45 2012] fullrun_mos2_xmm0006810101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 14 11:13:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006810101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 11:13:45 2012] fullrun_mos2_xmm0006810101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 14 11:13:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006810101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 11:13:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006810101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006810101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 11:13:45 2012] fullrun_mos2_xmm0006810101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 14 11:13:45 2012] fullrun_mos2_xmm0006810101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 14 11:13:45 2012] Fit fullrun_mos2_xmm0006810101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 14 11:13:50 2012] Spatial fit model total counts = 81870.600000, observed total counts = 80284.000000
[Thu Jun 14 11:13:50 2012] Offset between fit and detection position for source 1 = 0.080280 pixels
[Thu Jun 14 11:13:50 2012] 81909.200000 total counts/ 17394.100000 bgd. counts: snr = 489.170652
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.080280 pixels
  Position = (278.1, 287.1) = 22 42 39.36 29 43 32.4
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 64515.1 +/- 286.2
  Background counts = 17394.1
  Rate = 9 +/- 0.04
[Thu Jun 14 11:13:50 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 11:13:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 11:13:50 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 11:13:50 2012] Source does appear to be extended
[Thu Jun 14 11:13:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 14:04:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:04:55 2012] Initial guess for spatial extent in simple fitting = 5.77"
[Thu Jun 14 14:04:55 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.200
[Thu Jun 14 14:04:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.77"
[Thu Jun 14 14:24:56 2012] fullrun_mos2_xmm0006810101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 14 14:24:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006810101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 14:24:56 2012] fullrun_mos2_xmm0006810101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 14 14:24:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006810101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 14:24:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006810101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006810101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 14:24:56 2012] fullrun_mos2_xmm0006810101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 14 14:24:56 2012] fullrun_mos2_xmm0006810101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 14 14:24:56 2012] Fit fullrun_mos2_xmm0006810101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 14 14:24:59 2012] Spatial fit model total counts = 81843.800000, observed total counts = 80284.000000
[Thu Jun 14 14:24:59 2012] Offset between fit and detection position for source 1 = 0.000249 pixels
[Thu Jun 14 14:24:59 2012] 81887.500000 total counts/ 17337.200000 bgd. counts: snr = 490.240047
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000249 pixels
  Position = (278.1, 287.1) = 22 42 39.36 29 43 32.4
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 64550.3 +/- 286.2
  Background counts = 17337.2
  Rate = 9 +/- 0.04
[Thu Jun 14 14:24:59 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 14:24:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 14:24:59 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 14:24:59 2012] Source does appear to be extended
[Thu Jun 14 14:24:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:05:49 2012] Counts = 64550.300000, rescaling region sizes by 3.000000
[Thu Jun 14 15:05:49 2012] XMMSAS src. selection expression = ellipse(24148.756320, 24932.886800, 1038.504630, 1038.504630, 0.000000, X, Y)
[Thu Jun 14 15:05:49 2012] Writing source region out to fullrun_mos2_xmm0006810101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 14 15:05:49 2012] Extracting stamp from image fullrun_mos2_xmm0006810101_pi300-10000_cl_sm2.00.img.gz, (218, 227) - (338, 347)
[Thu Jun 14 15:05:49 2012] XMMSAS bgd. selection expression = annulus(24148.756320, 24932.886800, 5192.523149, 10385.046299, X, Y)
[Thu Jun 14 15:05:49 2012] Writing fullrun_mos2_xmm0006810101_pi300-10000_pass1_cl_src1.gif
[Thu Jun 14 15:05:53 2012] Mean detx,y = (30.89, 16.58) 
[Thu Jun 14 15:05:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 15:08:04 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 15:08:04 2012] Setting source spectrum file to fullrun_mos2_xmm0006810101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 15:08:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0006810101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 14 15:12:14 2012] Updating aperture counts using extracted products
[Thu Jun 14 15:12:14 2012] Error reading totcts from fullrun_mos2_xmm0006810101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 15:12:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 15:12:14 2012] Using photon index=1.80, rate=8.73, arf fullrun_mos2_xmm0006810101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 15:12:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 15:12:14 2012] Updating source flux to 9.1e-11
[Thu Jun 14 15:12:35 2012] Reading fit data from xmm0006810101/analysis//spectral/fullrun_mos2_xmm0006810101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 14 15:12:35 2012] Spectral fit parameter nH value = 5.39243e+20
[Thu Jun 14 15:12:35 2012] Spectral fit parameter PhoIndex value = 2.86055
[Thu Jun 14 15:12:35 2012] Failed to get F(0.3-8.0) from xmm0006810101/analysis//spectral/fullrun_mos2_xmm0006810101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 15:12:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 15:12:35 2012] Using Nh = 5.4e+20, photon index=2.86, rate=8.73, arf fullrun_mos2_xmm0006810101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 15:12:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 15:12:35 2012] Updating source flux to 6.8e-11