[Thu Jun 14 10:11:19 2012] Detection parameters: Position = (234.0, 464.0) = 22 42 54.15 29 56 22.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 35.5 +/- 7.6 Background counts = 2.8 Rate = 0.005 +/- 0.001 [Thu Jun 14 10:11:19 2012] Off-axis axis estimate = 12.88' [Thu Jun 14 10:27:06 2012] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting [Thu Jun 14 10:27:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Jun 14 10:27:06 2012] Initial guess for spatial extent in simple fitting = 12.87" [Thu Jun 14 10:27:06 2012] source mask rpix=3.0, npix_max = 47, mask sum = 36, frac = 0.752 [Thu Jun 14 10:27:06 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.87" [Thu Jun 14 10:36:15 2012] fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src4.ximg exists [Thu Jun 14 10:36:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src4.csv [Thu Jun 14 10:36:15 2012] fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src4_1.ximg exists [Thu Jun 14 10:36:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src4.csv [Thu Jun 14 10:36:15 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 14 10:36:15 2012] fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Thu Jun 14 10:36:15 2012] fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Thu Jun 14 10:36:15 2012] Fit fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Thu Jun 14 11:13:48 2012] Spatial fit model total counts = 52.979600, observed total counts = 53.000000 [Thu Jun 14 11:13:48 2012] Offset between fit and detection position for source 7 = 0.112160 pixels [Thu Jun 14 11:13:48 2012] 51.278100 total counts/ 35.480800 bgd. counts: snr = 2.652077 Spatial fit parameters: Offset between fit and detection position for source 7 = 0.112160 pixels Position = (233.9, 464.0) = 22 42 54.18 29 56 21.7 Extent = 3.2 (3.2-4.1)", rotation angle = 0 Source counts = 15.8 +/- 7.2 Background counts = 35.5 Rate = 0.002 +/- 0.001 [Thu Jun 14 11:13:48 2012] Vigneting correction estimate = 1.000000 [Thu Jun 14 11:13:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 14 11:13:48 2012] Assessing source extent using major axis lower bound [Thu Jun 14 11:13:48 2012] Source does appear to be extended [Thu Jun 14 11:13:48 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 14 11:13:48 2012] Deleting source due to low Poisson probability 0.6