[Thu Jun 14 10:11:18 2012] Detection parameters:
  Position = (235.8, 162.3) = 22 42 53.46 29 34 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.1 +/- 8.9
  Background counts = 4.1
  Rate = 0.007 +/- 0.001

[Thu Jun 14 10:11:19 2012] Off-axis axis estimate = 10.87'
[Thu Jun 14 10:27:06 2012] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:27:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 10:27:06 2012] Initial guess for spatial extent in simple fitting = 11.86"
[Thu Jun 14 10:27:06 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.008
[Thu Jun 14 10:27:06 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.86"
[Thu Jun 14 10:36:15 2012] fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jun 14 10:36:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src2.csv
[Thu Jun 14 10:36:15 2012] fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jun 14 10:36:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src2.csv
[Thu Jun 14 10:36:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 10:36:15 2012] fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jun 14 10:36:15 2012] fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jun 14 10:36:15 2012] Fit fullrun_mos1_xmm0006810101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jun 14 11:13:48 2012] Spatial fit model total counts = 76.977300, observed total counts = 77.000000
[Thu Jun 14 11:13:48 2012] Offset between fit and detection position for source 3 = 0.646493 pixels
[Thu Jun 14 11:13:48 2012] 78.986900 total counts/ 42.111700 bgd. counts: snr = 5.682416
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.646493 pixels
  Position = (235.3, 162.7) = 22 42 53.62 29 34 30.9
  Extent = 6.8 (3.0-9.1)", rotation angle = 0
  Source counts = 36.9 +/- 8.9
  Background counts = 42.1
  Rate = 0.005 +/- 0.001
[Thu Jun 14 11:13:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 11:13:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 11:13:48 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 11:13:48 2012] Source does appear to be extended
[Thu Jun 14 11:13:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 11:13:48 2012] Deleting source due to low Poisson probability 0.8