[Tue Sep 27 02:17:34 2011] Detection parameters:
  Position = (251.9, 361.0) = 12 35 50.16 -39 48 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.0 +/- 16.5
  Background counts = 60.9
  Rate = 0.003 +/- 0.0007

[Tue Sep 27 02:17:35 2011] Off-axis axis estimate = 5.65'
[Tue Sep 27 02:20:28 2011] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:20:28 2011] Initial guess for spatial extent in simple fitting = 9.25"
[Tue Sep 27 02:20:28 2011] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.304
[Tue Sep 27 02:20:28 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 9.25"
[Tue Sep 27 04:30:58 2011] fullrun_pn_xmm0006220201_pi300-10000_cl_pass0_src31.ximg exists
[Tue Sep 27 04:30:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006220201_pi300-10000_cl_pass0_src31.csv
[Tue Sep 27 04:30:58 2011] fullrun_pn_xmm0006220201_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Sep 27 04:30:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006220201_pi300-10000_cl_pass0_src31.csv
[Tue Sep 27 04:30:58 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0006220201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0006220201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 04:30:59 2011] fullrun_pn_xmm0006220201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Sep 27 04:30:59 2011] fullrun_pn_xmm0006220201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Sep 27 04:30:59 2011] Fit fullrun_pn_xmm0006220201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Sep 27 05:44:43 2011] Spatial fit model total counts = 673.431000, observed total counts = 669.000000
[Tue Sep 27 05:44:43 2011] Offset between fit and detection position for source 32 = 5.348276 pixels
[Tue Sep 27 05:44:43 2011] 679.401000 total counts/ 341.534000 bgd. counts: snr = 18.282215
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 5.348276 pixels
  Position = (254.5, 356.3) = 12 35 49.21 -39 49 6.3
  Extent = 18.5 (18.2-37.0)", rotation angle = 0
  Source counts = 337.9 +/- 26.1
  Background counts = 341.5
  Rate = 0.009 +/- 0.0007
[Tue Sep 27 05:44:43 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 05:44:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 05:44:43 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 05:44:43 2011] Source does appear to be extended
[Tue Sep 27 05:44:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 05:44:43 2011] Source is confused with source 5
[Tue Sep 27 05:44:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 05:44:59 2011] Initial guess for spatial extent in simple fitting = 18.51"
[Tue Sep 27 05:44:59 2011] source mask rpix=4.3, npix_max = 90, mask sum = 90, frac = 0.995
[Tue Sep 27 05:44:59 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 18.51"
[Tue Sep 27 07:14:24 2011] fullrun_pn_xmm0006220201_pi300-10000_cl_pass1_src30.ximg exists
[Tue Sep 27 07:14:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006220201_pi300-10000_cl_pass1_src30.csv
[Tue Sep 27 07:14:24 2011] fullrun_pn_xmm0006220201_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Sep 27 07:14:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006220201_pi300-10000_cl_pass1_src30.csv
[Tue Sep 27 07:14:24 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0006220201_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0006220201_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:14:25 2011] fullrun_pn_xmm0006220201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Sep 27 07:14:25 2011] fullrun_pn_xmm0006220201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Sep 27 07:14:25 2011] Fit fullrun_pn_xmm0006220201_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Sep 27 07:51:27 2011] Warning, spatial fit 30 centroid is now closest to src. 38
[Tue Sep 27 07:51:27 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:27 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:51:27 2011] Source does appear to be extended
[Tue Sep 27 07:51:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:51:40 2011] XMMSAS src. selection expression = ellipse(22089.212000, 30945.556000, 1110.420032, 1110.420032, 0.000000, X, Y)
[Tue Sep 27 07:51:40 2011] Writing source region out to fullrun_pn_xmm0006220201_pi300-10000_pass1_cl_src32_src.reg
[Tue Sep 27 07:51:40 2011] Extracting stamp from image fullrun_pn_xmm0006220201_pi300-10000_cl_sm2.00.img.gz, (191, 292) - (318, 420)
[Tue Sep 27 07:51:40 2011] XMMSAS bgd. selection expression = annulus(22089.212000, 30945.556000, 1850.700053, 3701.400107, X, Y) && !ellipse(19442.992220, 27130.949400, 1411.046441, 1411.046441, 0.000000, X, Y) && !ellipse(22112.881800, 29358.218400, 419.368812, 419.368812, 0.000000, X, Y) && !ellipse(22213.831400, 30407.746600, 352.276810, 352.276810, 0.000000, X, Y) && !ellipse(23258.968000, 29670.762000, 1378.192040, 1378.192040, 0.000000, X, Y) && !ellipse(19949.517000, 36044.254000, 1747.216050, 1747.216050, 0.000000, X, Y) && !ellipse(20154.902954, 35270.579468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20503.872000, 34353.326000, 1652.216048, 1652.216048, 0.000000, X, Y) && !ellipse(20687.954000, 33786.214000, 2131.104061, 2131.104061, 0.000000, X, Y) && !ellipse(21107.776371, 33123.742144, 1766.984051, 364.729627, 64.434690, X, Y) && !ellipse(21322.348000, 32580.224000, 1624.696047, 1624.696047, 0.000000, X, Y) && !ellipse(21644.552000, 31893.376000, 1518.048044, 399.963212, 250.064000, X, Y) && !ellipse(17869.984200, 30776.132000, 745.852821, 745.852821, 0.000000, X, Y) && !ellipse(18219.875652, 29754.653200, 380.646411, 380.646411, 0.000000, X, Y) && !ellipse(20452.941400, 29539.459200, 418.932812, 198.251206, 11.590123, X, Y) && !ellipse(21606.776520, 28783.626038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23150.816000, 28343.762000, 1239.344036, 1239.344036, 0.000000, X, Y) && !ellipse(23665.756000, 27538.980000, 2470.392071, 2470.392071, 0.000000, X, Y) && !ellipse(23992.007050, 26596.582825, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep 27 07:51:40 2011] Writing fullrun_pn_xmm0006220201_pi300-10000_pass1_cl_src32.gif
[Tue Sep 27 08:17:48 2011] Mean detx,y = (454.62, 7403.66) 
[Tue Sep 27 08:17:52 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 08:18:25 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 08:18:25 2011] Setting source spectrum file to fullrun_pn_xmm0006220201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Sep 27 08:18:25 2011] Setting bgd. spectrum file to fullrun_pn_xmm0006220201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Tue Sep 27 10:19:59 2011] Updating aperture counts using extracted products
[Tue Sep 27 10:19:59 2011] Error reading totcts from fullrun_pn_xmm0006220201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Sep 27 10:20:00 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 10:20:00 2011] Using photon index=1.80, rate=0.00896, arf fullrun_pn_xmm0006220201_pi300-10000_pass1_cl_src32.arf
[Tue Sep 27 10:20:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 10:20:00 2011] Updating source flux to 3.1e-14
[Tue Sep 27 10:21:32 2011] Flag c found in src. 32 procflags, skipping spectral fitting