[Fri May 25 03:24:43 2012] Detection parameters:
  Position = (291.8, 321.9) = 0 25 31.33 -77 14 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.1 +/- 13.2
  Background counts = 28.9
  Rate = 0.003 +/- 0.0004

[Fri May 25 03:24:43 2012] Off-axis axis estimate = 1.77'
[Fri May 25 03:27:05 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri May 25 03:27:05 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Fri May 25 03:27:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Fri May 25 03:27:05 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.31"
[Fri May 25 04:30:55 2012] fullrun_pn_xmm0006010401_pi300-10000_cl_pass0_src33.ximg exists
[Fri May 25 04:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010401_pi300-10000_cl_pass0_src33.csv
[Fri May 25 04:30:55 2012] fullrun_pn_xmm0006010401_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri May 25 04:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010401_pi300-10000_cl_pass0_src33.csv
[Fri May 25 04:30:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0006010401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0006010401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 04:30:56 2012] fullrun_pn_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri May 25 04:30:56 2012] fullrun_pn_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri May 25 04:30:56 2012] Fit fullrun_pn_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri May 25 05:40:21 2012] Source 33 is offset by 1.561340 and -4.317932 pixels which is larger than
2 X fitted extent = 1.282786 x 1.282786, not incorporating fit results
[Fri May 25 05:40:21 2012] Spatial fit model total counts = 467.461000, observed total counts = 466.000000
[Fri May 25 05:40:21 2012] Offset between fit and detection position for source 33 = 0.431547 pixels
[Fri May 25 05:40:21 2012] 448.782800 total counts/ 412.713000 bgd. counts: snr = 1.775496
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.431547 pixels
  Position = (292.0, 322.3) = 0 25 31.12 -77 14 43.6
  Extent = 3.5 (2.7-5.7)", rotation angle = 0
  Source counts = 36.1 +/- 21.2
  Background counts = 412.7
  Rate = 0.001 +/- 0.0006
[Fri May 25 05:40:21 2012] Vigneting correction estimate = 1.000000
[Fri May 25 05:40:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 05:40:21 2012] Assessing source extent using major axis lower bound
[Fri May 25 05:40:21 2012] Source does appear to be extended
[Fri May 25 05:40:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 05:40:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 05:40:41 2012] Initial guess for spatial extent in simple fitting = 3.55"
[Fri May 25 05:40:41 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.867
[Fri May 25 05:40:41 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 3.55"
[Fri May 25 06:42:22 2012] fullrun_pn_xmm0006010401_pi300-10000_cl_pass1_src33.ximg exists
[Fri May 25 06:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010401_pi300-10000_cl_pass1_src33.csv
[Fri May 25 06:42:22 2012] fullrun_pn_xmm0006010401_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri May 25 06:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010401_pi300-10000_cl_pass1_src33.csv
[Fri May 25 06:42:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0006010401_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0006010401_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 06:42:23 2012] fullrun_pn_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri May 25 06:42:23 2012] fullrun_pn_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri May 25 06:42:23 2012] Fit fullrun_pn_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Fri May 25 07:53:37 2012] Spatial fit model total counts = 410.414000, observed total counts = 410.000000
[Fri May 25 07:53:37 2012] Offset between fit and detection position for source 33 = 0.057345 pixels
[Fri May 25 07:53:37 2012] 397.720700 total counts/ 360.562000 bgd. counts: snr = 1.956909
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.057345 pixels
  Position = (292.0, 322.3) = 0 25 31.14 -77 14 43.8
  Extent = 3.7 (2.7-6.1)", rotation angle = 0
  Source counts = 37.2 +/- 19.9
  Background counts = 360.6
  Rate = 0.001 +/- 0.0006
[Fri May 25 07:53:37 2012] Vigneting correction estimate = 1.000000
[Fri May 25 07:53:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 07:53:37 2012] Assessing source extent using major axis lower bound
[Fri May 25 07:53:37 2012] Source does appear to be extended
[Fri May 25 07:53:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 07:53:54 2012] XMMSAS src. selection expression = ellipse(25353.423760, 27990.534400, 221.083206, 221.083206, 0.000000, X, Y)
[Fri May 25 07:53:54 2012] Writing source region out to fullrun_pn_xmm0006010401_pi300-10000_pass1_cl_src33_src.reg
[Fri May 25 07:53:54 2012] Extracting stamp from image fullrun_pn_xmm0006010401_pi300-10000_cl_sm2.00.img.gz, (279, 310) - (305, 335)
[Fri May 25 07:53:54 2012] XMMSAS bgd. selection expression = annulus(25353.423760, 27990.534400, 368.472011, 736.944021, X, Y) && !ellipse(24335.134400, 27360.700600, 451.265613, 451.265613, 0.000000, X, Y)
[Fri May 25 07:53:54 2012] Writing fullrun_pn_xmm0006010401_pi300-10000_pass1_cl_src33.gif
[Fri May 25 08:12:57 2012] Mean detx,y = (863.62, 542.00) 
[Fri May 25 08:13:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 08:13:12 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 08:13:12 2012] Setting source spectrum file to fullrun_pn_xmm0006010401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri May 25 08:13:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0006010401_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri May 25 08:44:18 2012] Not generating rmf since there are only 37 counts
[Fri May 25 08:44:18 2012] rmf not generated due to insufficient counts
[Fri May 25 09:25:44 2012] Updating aperture counts using extracted products
[Fri May 25 09:25:44 2012] Error reading totcts from fullrun_pn_xmm0006010401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri May 25 09:25:44 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 09:25:44 2012] Using photon index=1.80, rate=0.00113, arf fullrun_pn_xmm0006010401_pi300-10000_pass1_cl_src33.arf
[Fri May 25 09:25:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 09:25:44 2012] Updating source flux to 5.3e-15
[Fri May 25 09:26:23 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Fri May 25 09:26:23 2012] Source 33 has fewer than 100.000000 counts, skipping spectral fitting