[Fri May 25 03:25:27 2012] Detection parameters:
  Position = (194.1, 371.1) = 0 27 39.13 -77 11 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.0 +/- 14.5
  Background counts = 8.7
  Rate = 0.006 +/- 0.0007

[Fri May 25 03:25:27 2012] Off-axis axis estimate = 9.22'
[Fri May 25 05:05:41 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Fri May 25 05:05:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 05:05:41 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Fri May 25 05:05:41 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Fri May 25 05:05:41 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.04"
[Fri May 25 05:40:10 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 25 05:40:10 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 25 05:40:10 2012] Fit fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 25 05:40:11 2012] Fit fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri May 25 05:40:29 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.941159 pixels away
[Fri May 25 05:40:29 2012] Vigneting correction estimate = 1.000000
[Fri May 25 05:40:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 05:40:29 2012] Assessing source extent using major
[Fri May 25 05:40:29 2012] Source does appear to be extended
[Fri May 25 05:40:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 07:18:38 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:18:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 07:18:38 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Fri May 25 07:18:38 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Fri May 25 07:18:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.04"
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 25 07:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src2.csv
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 25 07:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src2.csv
[Fri May 25 07:53:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 25 07:53:26 2012] Fit fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri May 25 07:53:44 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.941159 pixels away
[Fri May 25 07:53:44 2012] Vigneting correction estimate = 1.000000
[Fri May 25 07:53:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 07:53:44 2012] Assessing source extent using major
[Fri May 25 07:53:44 2012] Source does appear to be extended
[Fri May 25 07:53:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 09:05:17 2012] XMMSAS src. selection expression = ellipse(16833.984344, 32240.800751, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 09:05:17 2012] Writing source region out to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src4_src.reg
[Fri May 25 09:05:17 2012] Extracting stamp from image fullrun_mos2_xmm0006010401_pi300-10000_cl_sm2.00.img.gz, (157, 334) - (232, 409)
[Fri May 25 09:05:17 2012] XMMSAS bgd. selection expression = annulus(16833.984344, 32240.800751, 1087.500000, 2175.000000, X, Y) && !ellipse(14708.742249, 32445.853973, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 09:05:17 2012] Writing fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src4.gif
[Fri May 25 09:05:30 2012] Mean detx,y = (-3273.11, 8474.11) 
[Fri May 25 09:05:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 09:05:48 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 09:05:48 2012] Setting source spectrum file to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 25 09:05:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri May 25 09:16:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 25 09:16:12 2012] rmf not generated due to insufficient counts
[Fri May 25 09:25:46 2012] Updating aperture counts using extracted products
[Fri May 25 09:25:46 2012] Error reading totcts from fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 25 09:25:46 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 09:25:46 2012] Using photon index=1.80, rate=0.00646, arf fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src4.arf
[Fri May 25 09:25:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 09:25:46 2012] Updating source flux to 1.4e-13
[Fri May 25 09:26:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting