[Fri May 25 03:25:27 2012] Detection parameters:
  Position = (305.0, 379.7) = 0 25 14.12 -77 10 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.4 +/- 8.9
  Background counts = 9.6
  Rate = 0.001 +/- 0.0003

[Fri May 25 03:25:27 2012] Off-axis axis estimate = 5.91'
[Fri May 25 05:05:41 2012] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Fri May 25 05:05:41 2012] Initial guess for spatial extent in simple fitting = 9.38"
[Fri May 25 05:05:41 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.062
[Fri May 25 05:05:41 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.38"
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src21.ximg exists
[Fri May 25 05:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src21.csv
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri May 25 05:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src21.csv
[Fri May 25 05:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri May 25 05:40:11 2012] Fit fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri May 25 05:40:29 2012] Spatial fit model total counts = 115.874000, observed total counts = 116.000000
[Fri May 25 05:40:29 2012] Offset between fit and detection position for source 23 = 0.135764 pixels
[Fri May 25 05:40:29 2012] 117.454500 total counts/ 92.183100 bgd. counts: snr = 2.632108
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.135764 pixels
  Position = (305.0, 379.8) = 0 25 14.13 -77 10 33.6
  Extent = 4.3 (2.6-6.6)", rotation angle = 0
  Source counts = 25.3 +/- 10.8
  Background counts = 92.2
  Rate = 0.0007 +/- 0.0003
[Fri May 25 05:40:29 2012] Vigneting correction estimate = 1.000000
[Fri May 25 05:40:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 05:40:29 2012] Assessing source extent using major axis lower bound
[Fri May 25 05:40:29 2012] Source does appear to be extended
[Fri May 25 05:40:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 07:18:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 07:18:38 2012] Initial guess for spatial extent in simple fitting = 4.28"
[Fri May 25 07:18:38 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.020
[Fri May 25 07:18:38 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 4.28"
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src21.ximg exists
[Fri May 25 07:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src21.csv
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri May 25 07:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src21.csv
[Fri May 25 07:53:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:53:27 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri May 25 07:53:27 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri May 25 07:53:27 2012] Fit fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Fri May 25 07:53:44 2012] Spatial fit model total counts = 116.239000, observed total counts = 115.000000
[Fri May 25 07:53:44 2012] Offset between fit and detection position for source 23 = 0.018168 pixels
[Fri May 25 07:53:44 2012] 118.096900 total counts/ 92.924500 bgd. counts: snr = 2.611316
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.018168 pixels
  Position = (305.0, 379.8) = 0 25 14.13 -77 10 33.6
  Extent = 4.2 (2.4-6.5)", rotation angle = 0
  Source counts = 25.2 +/- 10.9
  Background counts = 92.9
  Rate = 0.0007 +/- 0.0003
[Fri May 25 07:53:44 2012] Vigneting correction estimate = 1.000000
[Fri May 25 07:53:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 07:53:44 2012] Assessing source extent using major axis lower bound
[Fri May 25 07:53:44 2012] Source does appear to be extended
[Fri May 25 07:53:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 09:05:17 2012] XMMSAS src. selection expression = ellipse(26483.149380, 32994.335340, 253.422007, 253.422007, 0.000000, X, Y)
[Fri May 25 09:05:17 2012] Writing source region out to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src23_src.reg
[Fri May 25 09:05:17 2012] Extracting stamp from image fullrun_mos2_xmm0006010401_pi300-10000_cl_sm2.00.img.gz, (290, 365) - (320, 394)
[Fri May 25 09:05:17 2012] XMMSAS bgd. selection expression = annulus(26483.149380, 32994.335340, 422.370012, 844.740024, X, Y) && !ellipse(26629.805206, 34379.113556, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 09:05:17 2012] Writing fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src23.gif
[Fri May 25 09:09:50 2012] Mean detx,y = (-5871.49, -810.05) 
[Fri May 25 09:09:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 09:09:59 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 09:09:59 2012] Setting source spectrum file to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri May 25 09:09:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri May 25 09:23:39 2012] Not generating rmf since there are only 25 counts
[Fri May 25 09:23:39 2012] rmf not generated due to insufficient counts
[Fri May 25 09:25:46 2012] Updating aperture counts using extracted products
[Fri May 25 09:25:46 2012] Error reading totcts from fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri May 25 09:25:46 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 09:25:46 2012] Using photon index=1.80, rate=0.000715, arf fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src23.arf
[Fri May 25 09:25:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 09:25:46 2012] Updating source flux to 1.4e-14
[Fri May 25 09:26:04 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting