[Fri May 25 03:25:27 2012] Detection parameters:
  Position = (280.4, 315.1) = 0 25 46.38 -77 15 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 376.9 +/- 23.7
  Background counts = 10.9
  Rate = 0.01 +/- 0.0007

[Fri May 25 03:25:27 2012] Off-axis axis estimate = 1.78'
[Fri May 25 05:05:41 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Fri May 25 05:05:41 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Fri May 25 05:05:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.050
[Fri May 25 05:05:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Fri May 25 05:40:10 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 25 05:40:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src1.csv
[Fri May 25 05:40:10 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 25 05:40:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src1.csv
[Fri May 25 05:40:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 25 05:40:11 2012] Fit fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 25 05:40:29 2012] Spatial fit model total counts = 442.405000, observed total counts = 412.000000
[Fri May 25 05:40:29 2012] Offset between fit and detection position for source 2 = 0.147983 pixels
[Fri May 25 05:40:29 2012] 450.661000 total counts/ 212.277000 bgd. counts: snr = 16.361595
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.147983 pixels
  Position = (280.2, 315.1) = 0 25 46.58 -77 15 15.1
  Extent = 4.7 (4.0-5.2)", rotation angle = 0
  Source counts = 238.4 +/- 21.2
  Background counts = 212.3
  Rate = 0.007 +/- 0.0006
[Fri May 25 05:40:29 2012] Vigneting correction estimate = 1.000000
[Fri May 25 05:40:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 05:40:29 2012] Assessing source extent using major axis lower bound
[Fri May 25 05:40:29 2012] Source does appear to be extended
[Fri May 25 05:40:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 07:18:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 07:18:38 2012] Initial guess for spatial extent in simple fitting = 4.65"
[Fri May 25 07:18:38 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.913
[Fri May 25 07:18:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.65"
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 25 07:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src1.csv
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 25 07:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src1.csv
[Fri May 25 07:53:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 25 07:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 25 07:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 25 07:53:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:53:44 2012] Warning, spatial fit 1 centroid is now closest to src. 26
[Fri May 25 07:53:44 2012] Vigneting correction estimate = 1.000000
[Fri May 25 07:53:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 07:53:44 2012] Assessing source extent using major axis lower bound
[Fri May 25 07:53:44 2012] Source does appear to be extended
[Fri May 25 07:53:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 09:05:17 2012] XMMSAS src. selection expression = ellipse(24331.396160, 27363.886800, 279.199808, 279.199808, 0.000000, X, Y)
[Fri May 25 09:05:17 2012] Writing source region out to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src2_src.reg
[Fri May 25 09:05:17 2012] Extracting stamp from image fullrun_mos2_xmm0006010401_pi300-10000_cl_sm2.00.img.gz, (264, 299) - (296, 331)
[Fri May 25 09:05:17 2012] XMMSAS bgd. selection expression = annulus(24331.396160, 27363.886800, 465.333013, 930.666027, X, Y) && !ellipse(23166.112396, 27780.340912, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 09:05:17 2012] Writing fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src2.gif
[Fri May 25 09:05:19 2012] Mean detx,y = (74.63, 197.35) 
[Fri May 25 09:05:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 09:05:28 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 09:05:28 2012] Setting source spectrum file to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 25 09:05:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 25 09:25:46 2012] Updating aperture counts using extracted products
[Fri May 25 09:25:46 2012] Error reading totcts from fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 25 09:25:46 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 09:25:46 2012] Using photon index=1.80, rate=0.00677, arf fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src2.arf
[Fri May 25 09:25:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 09:25:46 2012] Updating source flux to 9.7e-14
[Fri May 25 09:26:23 2012] Reading fit data from xmm0006010401/analysis//spectral/fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src2_pl.csv
[Fri May 25 09:26:23 2012] Spectral fit parameter nH value = 3.1011e+21
[Fri May 25 09:26:23 2012] Spectral fit parameter PhoIndex value = 6.66505
[Fri May 25 09:26:23 2012] Failed to get F(0.3-8.0) from xmm0006010401/analysis//spectral/fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri May 25 09:26:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 09:26:23 2012] Using Nh = 3.1e+21, photon index=6.67, rate=0.00677, arf fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src2.arf
[Fri May 25 09:26:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 09:26:23 2012] Updating source flux to 7e-14