[Fri May 25 03:25:27 2012] Detection parameters:
  Position = (411.3, 227.1) = 0 22 53.12 -77 21 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.2 +/- 10.5
  Background counts = 8.0
  Rate = 0.002 +/- 0.0003

[Fri May 25 03:25:27 2012] Off-axis axis estimate = 9.68'
[Fri May 25 05:05:41 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Fri May 25 05:05:41 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Fri May 25 05:05:41 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Fri May 25 05:05:41 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.27"
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src18.ximg exists
[Fri May 25 05:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src18.csv
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri May 25 05:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src18.csv
[Fri May 25 05:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri May 25 05:40:11 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri May 25 05:40:11 2012] Fit fullrun_mos2_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri May 25 05:40:29 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.599244 pixels away
[Fri May 25 05:40:29 2012] Vigneting correction estimate = 1.000000
[Fri May 25 05:40:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 05:40:29 2012] Assessing source extent using major
[Fri May 25 05:40:29 2012] Source does appear to be extended
[Fri May 25 05:40:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 07:18:38 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:18:38 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Fri May 25 07:18:38 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Fri May 25 07:18:38 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 11.27"
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src18.ximg exists
[Fri May 25 07:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src18.csv
[Fri May 25 07:53:26 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri May 25 07:53:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src18.csv
[Fri May 25 07:53:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:53:27 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri May 25 07:53:27 2012] fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri May 25 07:53:27 2012] Fit fullrun_mos2_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri May 25 07:53:44 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.571299 pixels away
[Fri May 25 07:53:44 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.948580 pixels away
[Fri May 25 07:53:44 2012] Vigneting correction estimate = 1.000000
[Fri May 25 07:53:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 07:53:44 2012] Assessing source extent using major
[Fri May 25 07:53:44 2012] Source does appear to be extended
[Fri May 25 07:53:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 09:05:17 2012] XMMSAS src. selection expression = ellipse(35731.856293, 19707.420334, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 09:05:17 2012] Writing source region out to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src10_src.reg
[Fri May 25 09:05:17 2012] Extracting stamp from image fullrun_mos2_xmm0006010401_pi300-10000_cl_sm2.00.img.gz, (374, 190) - (449, 265)
[Fri May 25 09:05:17 2012] XMMSAS bgd. selection expression = annulus(35731.856293, 19707.420334, 1087.500000, 2175.000000, X, Y) && !ellipse(38631.912000, 19577.936000, 1980.992057, 1980.992057, 0.000000, X, Y)
[Fri May 25 09:05:17 2012] Writing fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src10.gif
[Fri May 25 09:09:10 2012] Mean detx,y = (5434.93, -12385.88) 
[Fri May 25 09:09:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 09:09:20 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 09:09:20 2012] Setting source spectrum file to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri May 25 09:09:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri May 25 09:23:26 2012] Not generating rmf since there are only 59 counts
[Fri May 25 09:23:26 2012] rmf not generated due to insufficient counts
[Fri May 25 09:25:46 2012] Updating aperture counts using extracted products
[Fri May 25 09:25:46 2012] Error reading totcts from fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri May 25 09:25:46 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 09:25:46 2012] Using photon index=1.80, rate=0.00168, arf fullrun_mos2_xmm0006010401_pi300-10000_pass1_cl_src10.arf
[Fri May 25 09:25:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 09:25:46 2012] Updating source flux to 4.5e-14
[Fri May 25 09:26:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting