[Fri May 25 03:25:08 2012] Detection parameters:
  Position = (217.7, 385.5) = 0 27 8.03 -77 10 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.3 +/- 8.0
  Background counts = 10.1
  Rate = 0.001 +/- 0.0003

[Fri May 25 03:25:08 2012] Off-axis axis estimate = 8.61'
[Fri May 25 04:30:56 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Fri May 25 04:30:56 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Fri May 25 04:30:56 2012] source mask rpix=2.5, npix_max = 35, mask sum = 25, frac = 0.710
[Fri May 25 04:30:56 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.73"
[Fri May 25 05:05:41 2012] fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_src25.ximg exists
[Fri May 25 05:05:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_src25.csv
[Fri May 25 05:05:41 2012] fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri May 25 05:05:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_src25.csv
[Fri May 25 05:05:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 05:05:41 2012] fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri May 25 05:05:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri May 25 05:05:41 2012] fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri May 25 05:05:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri May 25 05:05:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0006010401_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 05:40:26 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.969942 pixels away
[Fri May 25 05:40:26 2012] Vigneting correction estimate = 1.000000
[Fri May 25 05:40:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 05:40:26 2012] Assessing source extent using major
[Fri May 25 05:40:26 2012] Source does appear to be extended
[Fri May 25 05:40:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 06:42:23 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Fri May 25 06:42:23 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Fri May 25 06:42:23 2012] source mask rpix=2.5, npix_max = 35, mask sum = 25, frac = 0.710
[Fri May 25 06:42:23 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 10.73"
[Fri May 25 07:18:38 2012] fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_src25.ximg exists
[Fri May 25 07:18:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_src25.csv
[Fri May 25 07:18:38 2012] fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri May 25 07:18:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_src25.csv
[Fri May 25 07:18:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:18:38 2012] fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri May 25 07:18:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri May 25 07:18:38 2012] fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri May 25 07:18:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri May 25 07:18:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0006010401_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:53:41 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 10.920400 pixels away
[Fri May 25 07:53:41 2012] Vigneting correction estimate = 1.000000
[Fri May 25 07:53:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 07:53:41 2012] Assessing source extent using major
[Fri May 25 07:53:41 2012] Source does appear to be extended
[Fri May 25 07:53:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 08:47:35 2012] XMMSAS src. selection expression = ellipse(18894.372040, 33488.406982, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 08:47:35 2012] Writing source region out to fullrun_mos1_xmm0006010401_pi300-10000_pass1_cl_src23_src.reg
[Fri May 25 08:47:35 2012] Extracting stamp from image fullrun_mos1_xmm0006010401_pi300-10000_cl_sm2.00.img.gz, (180, 348) - (255, 423)
[Fri May 25 08:47:35 2012] XMMSAS bgd. selection expression = annulus(18894.372040, 33488.406982, 1087.500000, 2175.000000, X, Y) && !ellipse(16856.295883, 32240.938812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19875.168948, 31645.399400, 430.011212, 430.011212, 0.000000, X, Y) && !ellipse(21913.332840, 31267.283813, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 08:47:35 2012] Writing fullrun_mos1_xmm0006010401_pi300-10000_pass1_cl_src23.gif
[Fri May 25 08:53:56 2012] Mean detx,y = (7050.49, 4729.65) 
[Fri May 25 08:53:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 08:54:18 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 08:54:18 2012] Setting source spectrum file to fullrun_mos1_xmm0006010401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri May 25 08:54:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0006010401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri May 25 09:04:27 2012] Not generating rmf since there are only 33 counts
[Fri May 25 09:04:27 2012] rmf not generated due to insufficient counts
[Fri May 25 09:25:45 2012] Updating aperture counts using extracted products
[Fri May 25 09:25:45 2012] Error reading totcts from fullrun_mos1_xmm0006010401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri May 25 09:25:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 09:25:45 2012] Using photon index=1.80, rate=0.00145, arf fullrun_mos1_xmm0006010401_pi300-10000_pass1_cl_src23.arf
[Fri May 25 09:25:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 09:25:45 2012] Updating source flux to 2.6e-14
[Fri May 25 09:25:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting