[Sun Jun 24 10:22:08 2012] Detection parameters:
  Position = (329.7, 340.1) = 7 45 11.60 28 3 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1316.7 +/- 43.0
  Background counts = 27.8
  Rate = 0.05 +/- 0.002

[Sun Jun 24 10:22:12 2012] Off-axis axis estimate = 3.78'
[Sun Jun 24 10:26:10 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 10:26:10 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Sun Jun 24 10:26:10 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.074
[Sun Jun 24 10:26:10 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 8.32"
[Sun Jun 24 12:34:42 2012] fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_src26.ximg exists
[Sun Jun 24 12:34:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_src26.csv
[Sun Jun 24 12:34:42 2012] fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Jun 24 12:34:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_src26.csv
[Sun Jun 24 12:34:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 12:34:43 2012] fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Jun 24 12:34:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun Jun 24 12:34:43 2012] fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Jun 24 12:34:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun Jun 24 12:34:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 15:11:59 2012] Spatial fit model total counts = 1718.010000, observed total counts = 1448.000000
[Sun Jun 24 15:11:59 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 15:11:59 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 15:11:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 15:11:59 2012] Assessing source extent using major
[Sun Jun 24 15:11:59 2012] Source does appear to be extended
[Sun Jun 24 15:11:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 15:12:25 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 15:12:25 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Sun Jun 24 15:12:25 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.074
[Sun Jun 24 15:12:25 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 8.32"
[Sun Jun 24 16:54:36 2012] fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_src26.ximg exists
[Sun Jun 24 16:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_src26.csv
[Sun Jun 24 16:54:36 2012] fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Jun 24 16:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_src26.csv
[Sun Jun 24 16:54:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 16:54:36 2012] fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Jun 24 16:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun Jun 24 16:54:36 2012] fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Jun 24 16:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun Jun 24 16:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 19:06:31 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 11.647739 pixels away
[Sun Jun 24 19:06:31 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 19:06:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 19:06:31 2012] Assessing source extent using major
[Sun Jun 24 19:06:31 2012] Source does appear to be extended
[Sun Jun 24 19:06:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 19:07:14 2012] Counts = 1316.716064, rescaling region sizes by 2.000000
[Sun Jun 24 19:07:14 2012] XMMSAS src. selection expression = ellipse(28634.978912, 29543.588348, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 24 19:07:14 2012] Writing source region out to fullrun_pn_xmm0006010301_pi300-10000_pass1_cl_src26_src.reg
[Sun Jun 24 19:07:14 2012] Extracting stamp from image fullrun_pn_xmm0006010301_pi300-10000_cl_sm2.00.img.gz, (255, 265) - (405, 415)
[Sun Jun 24 19:07:14 2012] XMMSAS bgd. selection expression = annulus(28634.978912, 29543.588348, 4350.000000, 8700.000000, X, Y) && !ellipse(23871.248352, 20725.861694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27210.638000, 38840.696472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29994.548600, 36305.519200, 696.081620, 696.081620, 0.000000, X, Y) && !ellipse(23843.357560, 35588.636400, 427.616812, 427.616812, 0.000000, X, Y) && !ellipse(21391.931549, 35145.662994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34860.125214, 34871.302887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21399.709800, 34662.494000, 453.865613, 453.865613, 0.000000, X, Y) && !ellipse(31034.161320, 33315.316576, 1627.920047, 542.212816, 37.112138, X, Y) && !ellipse(26571.952118, 32963.765228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36886.061249, 32247.130341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22783.875793, 30150.586456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27551.575800, 29820.429600, 403.408012, 403.408012, 0.000000, X, Y) && !ellipse(33677.968109, 28982.941742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20727.298065, 29004.896179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29574.636261, 28751.911713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26700.551600, 27769.509800, 473.508814, 473.508814, 0.000000, X, Y) && !ellipse(21173.304489, 27297.186646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20560.290085, 27143.893219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26490.958800, 26672.640000, 1120.248032, 1120.248032, 0.000000, X, Y) && !ellipse(36399.566956, 26556.268860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21460.394135, 26154.634613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25467.241400, 25922.947000, 1055.408030, 1055.408030, 0.000000, X, Y) && !ellipse(31282.048431, 25883.999512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24308.029877, 25968.450684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21324.210600, 24467.231800, 394.397611, 394.397611, 0.000000, X, Y) && !ellipse(32802.050049, 23979.815155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20077.283400, 23780.401200, 463.298413, 463.298413, 0.000000, X, Y) && !ellipse(26742.299880, 23307.177000, 572.359216, 348.285610, 121.496791, X, Y) && !ellipse(30916.727020, 21372.922867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33515.536072, 20542.496078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36428.395264, 20217.560318, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 19:07:14 2012] Writing fullrun_pn_xmm0006010301_pi300-10000_pass1_cl_src26.gif
[Sun Jun 24 19:29:25 2012] Mean detx,y = (2241.01, -1538.95) 
[Sun Jun 24 19:29:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 19:31:59 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 19:32:00 2012] Setting source spectrum file to fullrun_pn_xmm0006010301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun 24 19:32:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0006010301_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Jun 24 20:13:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 24 20:13:19 2012] rmf not generated due to insufficient counts
[Sun Jun 24 22:58:42 2012] Updating aperture counts using extracted products
[Sun Jun 24 22:58:42 2012] Error reading totcts from fullrun_pn_xmm0006010301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun 24 22:58:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 22:58:43 2012] Using photon index=1.80, rate=0.0502, arf fullrun_pn_xmm0006010301_pi300-10000_pass1_cl_src26.arf
[Sun Jun 24 22:58:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 22:58:43 2012] Updating source flux to 1.6e-13
[Sun Jun 24 23:00:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting