[Sun Jun 24 10:23:18 2012] Detection parameters:
  Position = (246.7, 399.0) = 7 45 38.88 28 7 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.1 +/- 14.8
  Background counts = 6.8
  Rate = 0.007 +/- 0.0008

[Sun Jun 24 10:23:20 2012] Off-axis axis estimate = 8.20'
[Sun Jun 24 13:56:51 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 13:56:51 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Sun Jun 24 13:56:51 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.055
[Sun Jun 24 13:56:51 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.53"
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun 24 15:11:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src6.csv
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun 24 15:11:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src6.csv
[Sun Jun 24 15:11:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun 24 15:11:46 2012] Fit fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Jun 24 15:12:10 2012] Spatial fit model total counts = 222.264000, observed total counts = 210.000000
[Sun Jun 24 15:12:10 2012] Offset between fit and detection position for source 9 = 0.294184 pixels
[Sun Jun 24 15:12:10 2012] 222.394000 total counts/ 127.188000 bgd. counts: snr = 8.441920
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.294184 pixels
  Position = (246.4, 399.0) = 7 45 38.98 28 7 19.0
  Extent = 5.5 (4.4-6.7)", rotation angle = 0
  Source counts = 95.2 +/- 14.9
  Background counts = 127.2
  Rate = 0.003 +/- 0.0004
[Sun Jun 24 15:12:10 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 15:12:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 15:12:10 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 15:12:10 2012] Source does appear to be extended
[Sun Jun 24 15:12:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:59:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 17:59:30 2012] Initial guess for spatial extent in simple fitting = 5.52"
[Sun Jun 24 17:59:30 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.958
[Sun Jun 24 17:59:30 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 5.52"
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jun 24 19:06:17 2012] Fit fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src6 appears to have run properly
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jun 24 19:06:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jun 24 19:06:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jun 24 19:06:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 19:06:54 2012] Spatial fit model total counts = 221.481000, observed total counts = 210.000000
[Sun Jun 24 19:06:54 2012] Offset between fit and detection position for source 9 = 0.120645 pixels
[Sun Jun 24 19:06:54 2012] 222.070200 total counts/ 125.045000 bgd. counts: snr = 8.676636
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.120645 pixels
  Position = (246.3, 398.9) = 7 45 39.02 28 7 18.8
  Extent = 6.8 (5.5-8.5)" x 4.3 (3.5-5.4)", rotation angle = 143 (122-166) degrees
  Source counts = 97.0 +/- 14.9
  Background counts = 125.0
  Rate = 0.003 +/- 0.0004
[Sun Jun 24 19:06:54 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 19:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 19:06:54 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 19:06:54 2012] Source does appear to be extended
[Sun Jun 24 19:06:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Sun Jun 24 22:21:28 2012] XMMSAS src. selection expression = ellipse(21379.072400, 34656.621400, 410.092212, 257.217607, 142.848149, X, Y)
[Sun Jun 24 22:21:28 2012] Writing source region out to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src9_src.reg
[Sun Jun 24 22:21:28 2012] Extracting stamp from image fullrun_mos2_xmm0006010301_pi300-10000_cl_sm2.00.img.gz, (223, 375) - (270, 422)
[Sun Jun 24 22:21:28 2012] XMMSAS bgd. selection expression = annulus(21379.072400, 34656.621400, 683.487020, 1366.974039, X, Y)
[Sun Jun 24 22:21:28 2012] Writing fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src9.gif
[Sun Jun 24 22:23:44 2012] Mean detx,y = (4087.39, 7783.76) 
[Sun Jun 24 22:23:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 22:23:55 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 22:23:55 2012] Setting source spectrum file to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jun 24 22:23:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Jun 24 22:44:19 2012] Not generating rmf since there are only 97 counts
[Sun Jun 24 22:44:19 2012] rmf not generated due to insufficient counts
[Sun Jun 24 22:58:45 2012] Updating aperture counts using extracted products
[Sun Jun 24 22:58:45 2012] Error reading totcts from fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jun 24 22:58:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 22:58:46 2012] Using photon index=1.80, rate=0.00281, arf fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src9.arf
[Sun Jun 24 22:58:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 22:58:46 2012] Updating source flux to 8.4e-14
[Sun Jun 24 22:59:39 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting