[Sun Jun 24 10:23:20 2012] Detection parameters:
  Position = (443.1, 258.0) = 7 44 34.37 27 57 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.3 +/- 7.0
  Background counts = 6.6
  Rate = 0.001 +/- 0.0004

[Sun Jun 24 10:23:20 2012] Off-axis axis estimate = 10.89'
[Sun Jun 24 13:56:51 2012] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 13:56:51 2012] Initial guess for spatial extent in simple fitting = 11.87"
[Sun Jun 24 13:56:51 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.863
[Sun Jun 24 13:56:51 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 11.87"
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src39.ximg exists
[Sun Jun 24 15:11:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src39.csv
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Jun 24 15:11:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src39.csv
[Sun Jun 24 15:11:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 15:11:47 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Jun 24 15:11:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun Jun 24 15:11:47 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Jun 24 15:11:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun Jun 24 15:11:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 15:12:10 2012] Spatial fit model total counts = 85.852300, observed total counts = 71.000000
[Sun Jun 24 15:12:10 2012] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 15:12:10 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 15:12:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 15:12:10 2012] Assessing source extent using major
[Sun Jun 24 15:12:10 2012] Source does appear to be extended
[Sun Jun 24 15:12:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:59:30 2012] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 17:59:30 2012] Initial guess for spatial extent in simple fitting = 11.87"
[Sun Jun 24 17:59:30 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.863
[Sun Jun 24 17:59:30 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 11.87"
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src39.ximg exists
[Sun Jun 24 19:06:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src39.csv
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src39_1.ximg exists
[Sun Jun 24 19:06:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src39.csv
[Sun Jun 24 19:06:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 19:06:18 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sun Jun 24 19:06:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sun Jun 24 19:06:18 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sun Jun 24 19:06:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sun Jun 24 19:06:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 19:06:54 2012] Spatial fit model total counts = 85.350700, observed total counts = 71.000000
[Sun Jun 24 19:06:54 2012] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 19:06:54 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 19:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 19:06:54 2012] Assessing source extent using major
[Sun Jun 24 19:06:54 2012] Source does appear to be extended
[Sun Jun 24 19:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 22:21:29 2012] XMMSAS src. selection expression = ellipse(38502.567871, 22399.013367, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 24 22:21:29 2012] Writing source region out to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src42_src.reg
[Sun Jun 24 22:21:29 2012] Extracting stamp from image fullrun_mos2_xmm0006010301_pi300-10000_cl_sm2.00.img.gz, (406, 221) - (481, 296)
[Sun Jun 24 22:21:29 2012] XMMSAS bgd. selection expression = annulus(38502.567871, 22399.013367, 1087.500000, 2175.000000, X, Y) && !ellipse(36420.751434, 20118.452057, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 22:21:29 2012] Writing fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src42.gif
[Sun Jun 24 22:32:07 2012] Mean detx,y = (-10477.17, -7362.50) 
[Sun Jun 24 22:32:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 22:32:27 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 22:32:27 2012] Setting source spectrum file to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun Jun 24 22:32:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sun Jun 24 22:57:45 2012] Not generating rmf since there are only 25 counts
[Sun Jun 24 22:57:45 2012] rmf not generated due to insufficient counts
[Sun Jun 24 22:58:46 2012] Updating aperture counts using extracted products
[Sun Jun 24 22:58:46 2012] Error reading totcts from fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun Jun 24 22:58:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 22:58:46 2012] Using photon index=1.80, rate=0.00143, arf fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src42.arf
[Sun Jun 24 22:58:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 22:58:46 2012] Updating source flux to 3.3e-14
[Sun Jun 24 22:59:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting