[Sun Jun 24 10:23:18 2012] Detection parameters:
  Position = (178.6, 402.2) = 7 46 1.26 28 7 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1978.6 +/- 53.5
  Background counts = 8.7
  Rate = 0.06 +/- 0.002

[Sun Jun 24 10:23:20 2012] Off-axis axis estimate = 11.49'
[Sun Jun 24 13:56:51 2012] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 13:56:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 13:56:51 2012] Initial guess for spatial extent in simple fitting = 12.17"
[Sun Jun 24 13:56:51 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965
[Sun Jun 24 13:56:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.17"
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 24 15:11:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 24 15:11:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 15:11:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 24 15:11:46 2012] Fit fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 24 15:12:10 2012] Spatial fit model total counts = 1993.890000, observed total counts = 1989.000000
[Sun Jun 24 15:12:10 2012] Offset between fit and detection position for source 4 = 0.216490 pixels
[Sun Jun 24 15:12:10 2012] 1996.852000 total counts/ 535.002000 bgd. counts: snr = 63.201169
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.216490 pixels
  Position = (178.6, 402.4) = 7 46 1.27 28 7 33.6
  Extent = 6.5 (6.2-6.9)", rotation angle = 0
  Source counts = 1461.8 +/- 44.7
  Background counts = 535.0
  Rate = 0.04 +/- 0.001
[Sun Jun 24 15:12:10 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 15:12:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 15:12:10 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 15:12:10 2012] Source does appear to be extended
[Sun Jun 24 15:12:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:59:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 17:59:30 2012] Initial guess for spatial extent in simple fitting = 6.52"
[Sun Jun 24 17:59:30 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.001
[Sun Jun 24 17:59:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.52"
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 24 19:06:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src1.csv
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 24 19:06:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src1.csv
[Sun Jun 24 19:06:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 24 19:06:17 2012] Fit fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 24 19:06:54 2012] Spatial fit model total counts = 1833.990000, observed total counts = 1834.000000
[Sun Jun 24 19:06:54 2012] Offset between fit and detection position for source 4 = 0.030188 pixels
[Sun Jun 24 19:06:54 2012] 1843.867000 total counts/ 520.687000 bgd. counts: snr = 57.986989
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.030188 pixels
  Position = (178.6, 402.4) = 7 46 1.28 28 7 33.6
  Extent = 5.7 (5.5-6.0)", rotation angle = 0
  Source counts = 1323.2 +/- 42.9
  Background counts = 520.7
  Rate = 0.04 +/- 0.001
[Sun Jun 24 19:06:54 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 19:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 19:06:54 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 19:06:54 2012] Source does appear to be extended
[Sun Jun 24 19:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 22:21:28 2012] Counts = 1323.180000, rescaling region sizes by 2.000000
[Sun Jun 24 22:21:28 2012] XMMSAS src. selection expression = ellipse(15489.436400, 34959.251200, 684.555620, 684.555620, 0.000000, X, Y)
[Sun Jun 24 22:21:28 2012] Writing source region out to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 24 22:21:28 2012] Extracting stamp from image fullrun_mos2_xmm0006010301_pi300-10000_cl_sm2.00.img.gz, (139, 363) - (218, 442)
[Sun Jun 24 22:21:28 2012] XMMSAS bgd. selection expression = annulus(15489.436400, 34959.251200, 2281.852066, 4563.704131, X, Y) && !ellipse(18335.868200, 39745.115200, 598.091217, 598.091217, 0.000000, X, Y) && !ellipse(15008.094147, 30284.561890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14698.507012, 33612.953800, 303.585609, 303.585609, 0.000000, X, Y) && !ellipse(15305.327332, 32475.507996, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 22:21:28 2012] Writing fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src4.gif
[Sun Jun 24 22:21:31 2012] Mean detx,y = (9835.01, 9124.41) 
[Sun Jun 24 22:21:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 22:22:38 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 22:22:38 2012] Setting source spectrum file to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 24 22:22:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 24 22:58:45 2012] Updating aperture counts using extracted products
[Sun Jun 24 22:58:45 2012] Error reading totcts from fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 24 22:58:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 22:58:46 2012] Using photon index=1.80, rate=0.0383, arf fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src4.arf
[Sun Jun 24 22:58:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 22:58:46 2012] Updating source flux to 1.2e-12
[Sun Jun 24 23:00:27 2012] Reading fit data from xmm0006010301/analysis//spectral/fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src4_pl.csv
[Sun Jun 24 23:00:27 2012] Spectral fit parameter nH value = 4.15089e+20
[Sun Jun 24 23:00:27 2012] Spectral fit parameter PhoIndex value = 2.02173
[Sun Jun 24 23:00:27 2012] Failed to get F(0.3-8.0) from xmm0006010301/analysis//spectral/fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Sun Jun 24 23:00:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 23:00:27 2012] Using Nh = 4.2e+20, photon index=2.02, rate=0.0383, arf fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src4.arf
[Sun Jun 24 23:00:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 23:00:27 2012] Updating source flux to 1.1e-12