[Sun Jun 24 10:23:19 2012] Detection parameters:
  Position = (360.0, 298.1) = 7 45 1.64 28 0 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.8 +/- 13.8
  Background counts = 8.5
  Rate = 0.004 +/- 0.0005

[Sun Jun 24 10:23:20 2012] Off-axis axis estimate = 4.47'
[Sun Jun 24 13:56:51 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 13:56:51 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Sun Jun 24 13:56:51 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007
[Sun Jun 24 13:56:51 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.66"
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun 24 15:11:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src11.csv
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun 24 15:11:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src11.csv
[Sun Jun 24 15:11:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun 24 15:11:46 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun 24 15:11:46 2012] Fit fullrun_mos2_xmm0006010301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Jun 24 15:12:10 2012] Spatial fit model total counts = 201.243000, observed total counts = 201.000000
[Sun Jun 24 15:12:10 2012] Offset between fit and detection position for source 27 = 0.137931 pixels
[Sun Jun 24 15:12:10 2012] 200.156200 total counts/ 115.881000 bgd. counts: snr = 7.828773
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.137931 pixels
  Position = (359.9, 298.2) = 7 45 1.67 28 0 0.7
  Extent = 5.6 (4.3-6.9)", rotation angle = 0
  Source counts = 84.3 +/- 14.1
  Background counts = 115.9
  Rate = 0.002 +/- 0.0004
[Sun Jun 24 15:12:10 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 15:12:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 15:12:10 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 15:12:10 2012] Source does appear to be extended
[Sun Jun 24 15:12:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:59:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 17:59:30 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Sun Jun 24 17:59:30 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.239
[Sun Jun 24 17:59:30 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 5.64"
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun 24 19:06:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src11.csv
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun 24 19:06:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src11.csv
[Sun Jun 24 19:06:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun 24 19:06:17 2012] fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun 24 19:06:17 2012] Fit fullrun_mos2_xmm0006010301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Jun 24 19:06:54 2012] Spatial fit model total counts = 200.735000, observed total counts = 201.000000
[Sun Jun 24 19:06:54 2012] Offset between fit and detection position for source 27 = 0.012182 pixels
[Sun Jun 24 19:06:54 2012] 199.582300 total counts/ 116.117000 bgd. counts: snr = 7.745653
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.012182 pixels
  Position = (359.9, 298.2) = 7 45 1.67 28 0 0.7
  Extent = 5.6 (4.3-6.9)", rotation angle = 0
  Source counts = 83.5 +/- 14.1
  Background counts = 116.1
  Rate = 0.002 +/- 0.0004
[Sun Jun 24 19:06:54 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 19:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 19:06:54 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 19:06:54 2012] Source does appear to be extended
[Sun Jun 24 19:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 22:21:28 2012] XMMSAS src. selection expression = ellipse(31266.769760, 25896.085000, 333.891610, 333.891610, 0.000000, X, Y)
[Sun Jun 24 22:21:28 2012] Writing source region out to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src27_src.reg
[Sun Jun 24 22:21:28 2012] Extracting stamp from image fullrun_mos2_xmm0006010301_pi300-10000_cl_sm2.00.img.gz, (341, 279) - (379, 317)
[Sun Jun 24 22:21:28 2012] XMMSAS bgd. selection expression = annulus(31266.769760, 25896.085000, 556.486016, 1112.972032, X, Y)
[Sun Jun 24 22:21:28 2012] Writing fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src27.gif
[Sun Jun 24 22:24:59 2012] Mean detx,y = (-4069.32, -2610.85) 
[Sun Jun 24 22:25:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 22:25:06 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 22:25:06 2012] Setting source spectrum file to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun 24 22:25:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Jun 24 22:51:32 2012] Not generating rmf since there are only 83 counts
[Sun Jun 24 22:51:32 2012] rmf not generated due to insufficient counts
[Sun Jun 24 22:58:45 2012] Updating aperture counts using extracted products
[Sun Jun 24 22:58:45 2012] Error reading totcts from fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun 24 22:58:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 22:58:46 2012] Using photon index=1.80, rate=0.00242, arf fullrun_mos2_xmm0006010301_pi300-10000_pass1_cl_src27.arf
[Sun Jun 24 22:58:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 22:58:46 2012] Updating source flux to 4e-14
[Sun Jun 24 22:59:39 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting