[Sun Aug  5 10:47:50 2012] Detection parameters:
  Position = (265.3, 275.7) = 14 42 18.84 35 26 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.7 +/- 16.6
  Background counts = 23.1
  Rate = 0.008 +/- 0.0009

[Sun Aug  5 10:47:51 2012] Off-axis axis estimate = 2.91'
[Sun Aug  5 10:54:47 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:54:47 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Sun Aug  5 10:54:47 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.168
[Sun Aug  5 10:54:47 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.89"
[Sun Aug  5 11:12:44 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src2.ximg exists
[Sun Aug  5 11:12:44 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src2.csv
[Sun Aug  5 11:12:44 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Aug  5 11:12:44 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src2.csv
[Sun Aug  5 11:12:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 11:12:44 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Aug  5 11:12:44 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Aug  5 11:12:44 2012] Fit fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Aug  5 11:58:39 2012] Spatial fit model total counts = 446.846000, observed total counts = 431.000000
[Sun Aug  5 11:58:39 2012] Offset between fit and detection position for source 2 = 0.143495 pixels
[Sun Aug  5 11:58:39 2012] 453.801000 total counts/ 353.500000 bgd. counts: snr = 5.334707
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.143495 pixels
  Position = (265.2, 275.7) = 14 42 18.89 35 26 28.8
  Extent = 4.9 (4.1-6.2)", rotation angle = 0
  Source counts = 100.3 +/- 21.3
  Background counts = 353.5
  Rate = 0.004 +/- 0.0008
[Sun Aug  5 11:58:39 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 11:58:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 11:58:39 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 11:58:39 2012] Source does appear to be extended
[Sun Aug  5 11:58:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 11:58:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 11:58:51 2012] Initial guess for spatial extent in simple fitting = 4.86"
[Sun Aug  5 11:58:51 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.859
[Sun Aug  5 11:58:51 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.86"
[Sun Aug  5 12:07:34 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src2.ximg exists
[Sun Aug  5 12:07:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src2.csv
[Sun Aug  5 12:07:34 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Aug  5 12:07:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src2.csv
[Sun Aug  5 12:07:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 12:07:34 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Aug  5 12:07:34 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Aug  5 12:07:34 2012] Fit fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Aug  5 12:42:46 2012] Spatial fit model total counts = 446.634000, observed total counts = 431.000000
[Sun Aug  5 12:42:46 2012] Offset between fit and detection position for source 2 = 0.011968 pixels
[Sun Aug  5 12:42:46 2012] 453.641000 total counts/ 352.185000 bgd. counts: snr = 5.406202
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.011968 pixels
  Position = (265.1, 275.6) = 14 42 18.89 35 26 28.7
  Extent = 5.0 (4.1-6.1)", rotation angle = 0
  Source counts = 101.5 +/- 21.3
  Background counts = 352.2
  Rate = 0.004 +/- 0.0008
[Sun Aug  5 12:42:46 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 12:42:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 12:42:46 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 12:42:46 2012] Source does appear to be extended
[Sun Aug  5 12:42:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 12:42:54 2012] XMMSAS src. selection expression = ellipse(23019.318360, 23932.478400, 298.344009, 298.344009, 0.000000, X, Y)
[Sun Aug  5 12:42:54 2012] Writing source region out to fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src2_src.reg
[Sun Aug  5 12:42:54 2012] Extracting stamp from image fullrun_pn_xmm0005010301_pi300-10000_cl_sm2.00.img.gz, (248, 258) - (282, 293)
[Sun Aug  5 12:42:54 2012] XMMSAS bgd. selection expression = annulus(23019.318360, 23932.478400, 497.240014, 994.480029, X, Y)
[Sun Aug  5 12:42:54 2012] Writing fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src2.gif
[Sun Aug  5 12:50:12 2012] Mean detx,y = (2448.40, 1277.62) 
[Sun Aug  5 12:50:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 12:50:31 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 12:50:31 2012] Setting source spectrum file to fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug  5 12:50:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Aug  5 13:47:11 2012] Updating aperture counts using extracted products
[Sun Aug  5 13:47:11 2012] Error reading totcts from fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug  5 13:47:12 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 13:47:12 2012] Using photon index=1.80, rate=0.00391, arf fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src2.arf
[Sun Aug  5 13:47:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 13:47:12 2012] Updating source flux to 1.3e-14