[Sun Aug  5 10:47:50 2012] Detection parameters:
  Position = (296.8, 274.1) = 14 42 7.62 35 26 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63864.1 +/- 298.3
  Background counts = 24.2
  Rate = 4 +/- 0.02

[Sun Aug  5 10:47:51 2012] Off-axis axis estimate = 1.77'
[Sun Aug  5 10:54:47 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:54:47 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Aug  5 10:54:47 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Sun Aug  5 10:54:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Sun Aug  5 11:12:44 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug  5 11:12:44 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src1.csv
[Sun Aug  5 11:12:44 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug  5 11:12:44 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src1.csv
[Sun Aug  5 11:12:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 11:12:44 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug  5 11:12:44 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug  5 11:12:44 2012] Fit fullrun_pn_xmm0005010301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug  5 11:58:39 2012] Spatial fit model total counts = 56395.900000, observed total counts = 56195.000000
[Sun Aug  5 11:58:39 2012] Offset between fit and detection position for source 1 = 0.134475 pixels
[Sun Aug  5 11:58:39 2012] 56324.200000 total counts/ 10559.200000 bgd. counts: snr = 445.366923
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.134475 pixels
  Position = (296.7, 274.2) = 14 42 7.65 35 26 22.6
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 45765.0 +/- 237.3
  Background counts = 10559.2
  Rate = 2 +/- 0.009
[Sun Aug  5 11:58:39 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 11:58:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 11:58:39 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 11:58:39 2012] Source does appear to be extended
[Sun Aug  5 11:58:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 11:58:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 11:58:51 2012] Initial guess for spatial extent in simple fitting = 5.86"
[Sun Aug  5 11:58:51 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.171
[Sun Aug  5 11:58:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.86"
[Sun Aug  5 12:07:34 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug  5 12:07:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src1.csv
[Sun Aug  5 12:07:34 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug  5 12:07:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src1.csv
[Sun Aug  5 12:07:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 12:07:34 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug  5 12:07:34 2012] fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug  5 12:07:34 2012] Fit fullrun_pn_xmm0005010301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug  5 12:42:46 2012] Spatial fit model total counts = 56416.300000, observed total counts = 56195.000000
[Sun Aug  5 12:42:46 2012] Offset between fit and detection position for source 1 = 0.000049 pixels
[Sun Aug  5 12:42:46 2012] 56344.600000 total counts/ 10572.000000 bgd. counts: snr = 445.171143
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000049 pixels
  Position = (296.7, 274.2) = 14 42 7.65 35 26 22.6
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 45772.6 +/- 237.4
  Background counts = 10572.0
  Rate = 2 +/- 0.009
[Sun Aug  5 12:42:46 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 12:42:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 12:42:46 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 12:42:46 2012] Source does appear to be extended
[Sun Aug  5 12:42:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 12:42:54 2012] Counts = 45772.600000, rescaling region sizes by 3.000000
[Sun Aug  5 12:42:54 2012] XMMSAS src. selection expression = ellipse(25767.204800, 23809.906800, 1054.868430, 1054.868430, 0.000000, X, Y)
[Sun Aug  5 12:42:54 2012] Writing source region out to fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug  5 12:42:54 2012] Extracting stamp from image fullrun_pn_xmm0005010301_pi300-10000_cl_sm2.00.img.gz, (236, 214) - (357, 335)
[Sun Aug  5 12:42:54 2012] XMMSAS bgd. selection expression = annulus(25767.204800, 23809.906800, 5274.342152, 10548.684304, X, Y) && !ellipse(23019.318360, 23932.478400, 397.792011, 397.792011, 0.000000, X, Y) && !ellipse(26349.817800, 25916.350800, 404.359212, 404.359212, 0.000000, X, Y) && !ellipse(24108.350000, 26401.704000, 1129.272032, 721.538421, 57.283100, X, Y) && !ellipse(23750.796000, 26869.286000, 1154.968033, 1154.968033, 0.000000, X, Y)
[Sun Aug  5 12:42:54 2012] Writing fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src1.gif
[Sun Aug  5 12:44:50 2012] Mean detx,y = (162.47, -243.65) 
[Sun Aug  5 12:44:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 12:46:32 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 12:46:32 2012] Setting source spectrum file to fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 12:46:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug  5 13:47:11 2012] Updating aperture counts using extracted products
[Sun Aug  5 13:47:11 2012] Error reading totcts from fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 13:47:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 13:47:11 2012] Using photon index=1.80, rate=1.77, arf fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 13:47:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 13:47:12 2012] Updating source flux to 4.2e-12
[Sun Aug  5 13:48:34 2012] Reading fit data from xmm0005010301/analysis//spectral/fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug  5 13:48:34 2012] Spectral fit parameter nH value = 449800000000.0
[Sun Aug  5 13:48:34 2012] Spectral fit parameter PhoIndex value = 2.71893
[Sun Aug  5 13:48:34 2012] Failed to get F(0.3-8.0) from xmm0005010301/analysis//spectral/fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug  5 13:48:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 13:48:34 2012] Using Nh = 4.5e+11, photon index=2.72, rate=1.77, arf fullrun_pn_xmm0005010301_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 13:48:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 13:48:34 2012] Updating source flux to 2.7e-12