[Sun Aug  5 10:48:39 2012] Detection parameters:
  Position = (128.5, 231.3) = 14 43 7.50 35 23 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.0 +/- 12.2
  Background counts = 5.9
  Rate = 0.004 +/- 0.0005

[Sun Aug  5 10:48:39 2012] Off-axis axis estimate = 13.25'
[Sun Aug  5 11:31:14 2012] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 11:31:14 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Sun Aug  5 11:31:14 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 1.000
[Sun Aug  5 11:31:14 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 13.05"
[Sun Aug  5 11:58:37 2012] fullrun_mos2_xmm0005010301_pi300-10000_cl_pass0_src9.ximg exists
[Sun Aug  5 11:58:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010301_pi300-10000_cl_pass0_src9.csv
[Sun Aug  5 11:58:37 2012] fullrun_mos2_xmm0005010301_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Aug  5 11:58:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010301_pi300-10000_cl_pass0_src9.csv
[Sun Aug  5 11:58:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 11:58:37 2012] fullrun_mos2_xmm0005010301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Aug  5 11:58:37 2012] fullrun_mos2_xmm0005010301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Aug  5 11:58:37 2012] Fit fullrun_mos2_xmm0005010301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Aug  5 11:58:44 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.173353 pixels away
[Sun Aug  5 11:58:44 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 11:58:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 11:58:44 2012] Assessing source extent using major
[Sun Aug  5 11:58:44 2012] Source does appear to be extended
[Sun Aug  5 11:58:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 12:25:34 2012] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 12:25:34 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Sun Aug  5 12:25:34 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 1.000
[Sun Aug  5 12:25:34 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 13.05"
[Sun Aug  5 12:42:44 2012] fullrun_mos2_xmm0005010301_pi300-10000_cl_pass1_src9.ximg exists
[Sun Aug  5 12:42:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010301_pi300-10000_cl_pass1_src9.csv
[Sun Aug  5 12:42:44 2012] fullrun_mos2_xmm0005010301_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Aug  5 12:42:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010301_pi300-10000_cl_pass1_src9.csv
[Sun Aug  5 12:42:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 12:42:44 2012] fullrun_mos2_xmm0005010301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Aug  5 12:42:44 2012] fullrun_mos2_xmm0005010301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Aug  5 12:42:44 2012] Fit fullrun_mos2_xmm0005010301_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Aug  5 12:42:49 2012] Spatial fit model total counts = 164.998000, observed total counts = 165.000000
[Sun Aug  5 12:42:49 2012] Offset between fit and detection position for source 1 = 0.497470 pixels
[Sun Aug  5 12:42:49 2012] 164.707400 total counts/ 95.020100 bgd. counts: snr = 7.149010
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.497470 pixels
  Position = (128.8, 231.7) = 14 43 7.38 35 23 16.6
  Extent = 7.4 (5.0-9.9)", rotation angle = 0
  Source counts = 69.7 +/- 12.8
  Background counts = 95.0
  Rate = 0.003 +/- 0.0005
[Sun Aug  5 12:42:49 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 12:42:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 12:42:49 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 12:42:49 2012] Source does appear to be extended
[Sun Aug  5 12:42:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 13:35:07 2012] XMMSAS src. selection expression = ellipse(11157.324400, 20107.859000, 445.984213, 445.984213, 0.000000, X, Y)
[Sun Aug  5 13:35:07 2012] Writing source region out to fullrun_mos2_xmm0005010301_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug  5 13:35:07 2012] Extracting stamp from image fullrun_mos2_xmm0005010301_pi300-10000_cl_sm2.00.img.gz, (103, 206) - (154, 257)
[Sun Aug  5 13:35:07 2012] XMMSAS bgd. selection expression = annulus(11157.324400, 20107.859000, 743.307021, 1486.614043, X, Y)
[Sun Aug  5 13:35:07 2012] Writing fullrun_mos2_xmm0005010301_pi300-10000_pass1_cl_src1.gif
[Sun Aug  5 13:41:08 2012] Mean detx,y = (-14454.45, -4165.46) 
[Sun Aug  5 13:41:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 13:41:17 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 13:41:17 2012] Setting source spectrum file to fullrun_mos2_xmm0005010301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 13:41:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0005010301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug  5 13:46:38 2012] Not generating rmf since there are only 69 counts
[Sun Aug  5 13:46:38 2012] rmf not generated due to insufficient counts
[Sun Aug  5 13:47:13 2012] Updating aperture counts using extracted products
[Sun Aug  5 13:47:13 2012] Error reading totcts from fullrun_mos2_xmm0005010301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 13:47:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 13:47:14 2012] Using photon index=1.80, rate=0.00267, arf fullrun_mos2_xmm0005010301_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 13:47:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 13:47:14 2012] Updating source flux to 6.8e-14
[Sun Aug  5 13:47:32 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting