[Thu May 17 22:53:08 2012] Detection parameters:
  Position = (272.2, 262.0) = 14 42 14.91 35 25 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.6 +/- 47.7
  Background counts = 1135.9
  Rate = 0.01 +/- 0.003

[Thu May 17 22:53:08 2012] Off-axis axis estimate = 3.26'
[Thu May 17 23:04:54 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Thu May 17 23:04:54 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Thu May 17 23:04:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.904
[Thu May 17 23:04:54 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.06"
[Fri May 18 00:12:19 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src7.ximg exists
[Fri May 18 00:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src7.csv
[Fri May 18 00:12:19 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri May 18 00:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src7.csv
[Fri May 18 00:12:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:12:20 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri May 18 00:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri May 18 00:12:20 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri May 18 00:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri May 18 00:12:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:35:59 2012] Source 7 is offset by -5.222094 and -3.703249 pixels which is larger than
2 X fitted extent = 4.937655 x 4.937655, not incorporating fit results
[Fri May 18 00:35:59 2012] Source 7 is offset by -3.335795 and -4.263341 pixels which is larger than
2 X fitted extent = 1.033913 x 1.033913, not incorporating fit results
[Fri May 18 00:35:59 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:35:59 2012] Assessing source extent using major
[Fri May 18 00:35:59 2012] Source does appear to be extended
[Fri May 18 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 00:35:59 2012] Deleting source due to low Poisson probability 0.9