[Thu May 17 22:53:07 2012] Detection parameters:
  Position = (293.2, 275.2) = 14 42 7.44 35 26 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108378.8 +/- 387.8
  Background counts = 1141.5
  Rate = 6 +/- 0.02

[Thu May 17 22:53:08 2012] Off-axis axis estimate = 1.73'
[Thu May 17 23:04:54 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu May 17 23:04:54 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu May 17 23:04:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu May 17 23:04:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri May 18 00:12:19 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 18 00:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src1.csv
[Fri May 18 00:12:19 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 18 00:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src1.csv
[Fri May 18 00:12:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:12:20 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 18 00:12:20 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 18 00:12:20 2012] Fit fullrun_pn_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 18 00:35:59 2012] Spatial fit model total counts = 98200.700000, observed total counts = 99556.000000
[Fri May 18 00:35:59 2012] Offset between fit and detection position for source 1 = 0.149228 pixels
[Fri May 18 00:35:59 2012] 98264.700000 total counts/ 25600.000000 bgd. counts: snr = 454.154375
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.149228 pixels
  Position = (293.2, 275.4) = 14 42 7.45 35 26 23.3
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 72664.7 +/- 313.5
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Fri May 18 00:35:59 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:35:59 2012] Assessing source extent using major axis lower bound
[Fri May 18 00:35:59 2012] Source does appear to be extended
[Fri May 18 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 00:36:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 18 00:36:09 2012] Initial guess for spatial extent in simple fitting = 5.85"
[Fri May 18 00:36:09 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.882
[Fri May 18 00:36:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.85"
[Fri May 18 01:31:40 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 18 01:31:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010201_pi300-10000_cl_pass1_src1.csv
[Fri May 18 01:31:40 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 18 01:31:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0005010201_pi300-10000_cl_pass1_src1.csv
[Fri May 18 01:31:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0005010201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0005010201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 01:31:40 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 18 01:31:40 2012] fullrun_pn_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 18 01:31:40 2012] Fit fullrun_pn_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 18 01:57:29 2012] Spatial fit model total counts = 98167.600000, observed total counts = 99556.000000
[Fri May 18 01:57:29 2012] Offset between fit and detection position for source 1 = 0.001392 pixels
[Fri May 18 01:57:29 2012] 98239.700000 total counts/ 25600.000000 bgd. counts: snr = 453.998125
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001392 pixels
  Position = (293.2, 275.4) = 14 42 7.45 35 26 23.3
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 72639.7 +/- 313.4
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Fri May 18 01:57:29 2012] Vigneting correction estimate = 1.000000
[Fri May 18 01:57:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 01:57:29 2012] Assessing source extent using major axis lower bound
[Fri May 18 01:57:29 2012] Source does appear to be extended
[Fri May 18 01:57:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 01:57:39 2012] Counts = 72639.700000, rescaling region sizes by 3.000000
[Fri May 18 01:57:39 2012] XMMSAS src. selection expression = ellipse(25457.360920, 23907.091000, 1052.346630, 1052.346630, 0.000000, X, Y)
[Fri May 18 01:57:39 2012] Writing source region out to fullrun_pn_xmm0005010201_pi300-10000_pass1_cl_src1_src.reg
[Fri May 18 01:57:39 2012] Extracting stamp from image fullrun_pn_xmm0005010201_pi300-10000_cl_sm2.00.img.gz, (233, 215) - (354, 336)
[Fri May 18 01:57:39 2012] XMMSAS bgd. selection expression = annulus(25457.360920, 23907.091000, 5261.733151, 10523.466303, X, Y) && !ellipse(26967.370941, 24832.175140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27391.944200, 24557.362000, 1163.736033, 1067.416031, 89.577000, X, Y) && !ellipse(26852.769257, 24048.131714, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 18 01:57:39 2012] Writing fullrun_pn_xmm0005010201_pi300-10000_pass1_cl_src1.gif
[Fri May 18 02:01:45 2012] Mean detx,y = (115.28, -202.46) 
[Fri May 18 02:01:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 02:04:51 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 02:04:52 2012] Setting source spectrum file to fullrun_pn_xmm0005010201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 18 02:04:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0005010201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 18 03:39:31 2012] Updating aperture counts using extracted products
[Fri May 18 03:39:31 2012] Error reading totcts from fullrun_pn_xmm0005010201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 18 03:39:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 03:39:31 2012] Using photon index=1.80, rate=2.85, arf fullrun_pn_xmm0005010201_pi300-10000_pass1_cl_src1.arf
[Fri May 18 03:39:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 03:39:31 2012] Updating source flux to 6.8e-12
[Fri May 18 03:41:20 2012] Reading fit data from xmm0005010201/analysis//spectral/fullrun_pn_xmm0005010201_pi300-10000_pass1_cl_src1_pl.csv
[Fri May 18 03:41:20 2012] Spectral fit parameter nH value = 694800000000.0
[Fri May 18 03:41:20 2012] Spectral fit parameter PhoIndex value = 2.51299
[Fri May 18 03:41:20 2012] Failed to get F(0.3-8.0) from xmm0005010201/analysis//spectral/fullrun_pn_xmm0005010201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri May 18 03:41:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 03:41:20 2012] Using Nh = 6.9e+11, photon index=2.51, rate=2.85, arf fullrun_pn_xmm0005010201_pi300-10000_pass1_cl_src1.arf
[Fri May 18 03:41:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 03:41:20 2012] Updating source flux to 4.7e-12