[Thu May 17 22:54:12 2012] Detection parameters:
  Position = (293.0, 275.3) = 14 42 7.50 35 26 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26347.7 +/- 191.2
  Background counts = 132.9
  Rate = 1 +/- 0.007

[Thu May 17 22:54:12 2012] Off-axis axis estimate = 1.72'
[Fri May 18 00:24:33 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri May 18 00:24:33 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri May 18 00:24:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri May 18 00:24:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri May 18 00:35:53 2012] fullrun_mos2_xmm0005010201_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 18 00:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010201_pi300-10000_cl_pass0_src1.csv
[Fri May 18 00:35:53 2012] fullrun_mos2_xmm0005010201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 18 00:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010201_pi300-10000_cl_pass0_src1.csv
[Fri May 18 00:35:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:35:53 2012] fullrun_mos2_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 18 00:35:53 2012] fullrun_mos2_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 18 00:35:53 2012] Fit fullrun_mos2_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 18 00:36:02 2012] Spatial fit model total counts = 13088.700000, observed total counts = 12721.000000
[Fri May 18 00:36:02 2012] Offset between fit and detection position for source 1 = 0.242477 pixels
[Fri May 18 00:36:02 2012] 13082.390000 total counts/ 3025.490000 bgd. counts: snr = 182.837920
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.242477 pixels
  Position = (293.2, 275.5) = 14 42 7.45 35 26 23.7
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 10056.9 +/- 114.4
  Background counts = 3025.5
  Rate = 1 +/- 0.01
[Fri May 18 00:36:02 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:36:02 2012] Assessing source extent using major axis lower bound
[Fri May 18 00:36:02 2012] Source does appear to be extended
[Fri May 18 00:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 01:46:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 18 01:46:49 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Fri May 18 01:46:49 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.003
[Fri May 18 01:46:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.35"
[Fri May 18 01:57:26 2012] fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 18 01:57:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_src1.csv
[Fri May 18 01:57:26 2012] fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 18 01:57:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_src1.csv
[Fri May 18 01:57:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 01:57:26 2012] fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 18 01:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 18 01:57:26 2012] fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 18 01:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 18 01:57:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 01:57:33 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri May 18 01:57:33 2012] Vigneting correction estimate = 1.000000
[Fri May 18 01:57:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 01:57:33 2012] Assessing source extent using major axis lower bound
[Fri May 18 01:57:33 2012] Source does appear to be extended
[Fri May 18 01:57:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 03:25:13 2012] Counts = 10056.900000, rescaling region sizes by 3.000000
[Fri May 18 03:25:13 2012] XMMSAS src. selection expression = ellipse(25459.357020, 23916.470200, 962.593228, 962.593228, 0.000000, X, Y)
[Fri May 18 03:25:13 2012] Writing source region out to fullrun_mos2_xmm0005010201_pi300-10000_pass1_cl_src1_src.reg
[Fri May 18 03:25:13 2012] Extracting stamp from image fullrun_mos2_xmm0005010201_pi300-10000_cl_sm2.00.img.gz, (238, 220) - (349, 331)
[Fri May 18 03:25:14 2012] XMMSAS bgd. selection expression = annulus(25459.357020, 23916.470200, 4812.966138, 9625.932277, X, Y)
[Fri May 18 03:25:14 2012] Writing fullrun_mos2_xmm0005010201_pi300-10000_pass1_cl_src1.gif
[Fri May 18 03:25:19 2012] Mean detx,y = (52.48, 64.64) 
[Fri May 18 03:25:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 03:30:45 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 03:30:45 2012] Setting source spectrum file to fullrun_mos2_xmm0005010201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 18 03:30:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0005010201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 18 03:39:32 2012] Updating aperture counts using extracted products
[Fri May 18 03:39:32 2012] Error reading totcts from fullrun_mos2_xmm0005010201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 18 03:39:32 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 03:39:32 2012] Using photon index=1.80, rate=1.02, arf fullrun_mos2_xmm0005010201_pi300-10000_pass1_cl_src1.arf
[Fri May 18 03:39:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 03:39:32 2012] Updating source flux to 1.1e-11
[Fri May 18 03:40:35 2012] Reading fit data from xmm0005010201/analysis//spectral/fullrun_mos2_xmm0005010201_pi300-10000_pass1_cl_src1_pl.csv
[Fri May 18 03:40:35 2012] Spectral fit parameter nH value = 7.77175e+12
[Fri May 18 03:40:35 2012] Spectral fit parameter PhoIndex value = 2.84199
[Fri May 18 03:40:35 2012] Failed to get F(0.3-8.0) from xmm0005010201/analysis//spectral/fullrun_mos2_xmm0005010201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri May 18 03:40:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 03:40:35 2012] Using Nh = 7.8e+12, photon index=2.84, rate=1.02, arf fullrun_mos2_xmm0005010201_pi300-10000_pass1_cl_src1.arf
[Fri May 18 03:40:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 03:40:35 2012] Updating source flux to 8.3e-12