[Thu May 17 22:53:39 2012] Detection parameters:
  Position = (458.5, 187.0) = 14 41 8.68 35 19 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.2 +/- 20.4
  Background counts = 43.2
  Rate = 0.009 +/- 0.0007

[Thu May 17 22:53:39 2012] Off-axis axis estimate = 14.14'
[Fri May 18 00:12:20 2012] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Fri May 18 00:12:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 00:12:20 2012] Initial guess for spatial extent in simple fitting = 13.50"
[Fri May 18 00:12:20 2012] source mask rpix=3.1, npix_max = 51, mask sum = 53, frac = 1.021
[Fri May 18 00:12:20 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 13.50"
[Fri May 18 00:24:33 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 18 00:24:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src2.csv
[Fri May 18 00:24:33 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 18 00:24:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src2.csv
[Fri May 18 00:24:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:24:33 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 18 00:24:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 18 00:24:33 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 18 00:24:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 18 00:24:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:36:01 2012] Spatial fit model total counts = 179.607000, observed total counts = 138.000000
[Fri May 18 00:36:01 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 18 00:36:01 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:36:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:36:01 2012] Assessing source extent using major
[Fri May 18 00:36:01 2012] Source does appear to be extended
[Fri May 18 00:36:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 01:31:40 2012] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Fri May 18 01:31:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 01:31:40 2012] Initial guess for spatial extent in simple fitting = 13.50"
[Fri May 18 01:31:40 2012] source mask rpix=3.1, npix_max = 51, mask sum = 53, frac = 1.021
[Fri May 18 01:31:40 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.50"
[Fri May 18 01:46:49 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 18 01:46:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_src2.csv
[Fri May 18 01:46:49 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 18 01:46:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_src2.csv
[Fri May 18 01:46:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 01:46:49 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 18 01:46:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 18 01:46:49 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 18 01:46:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 18 01:46:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 01:57:31 2012] Spatial fit model total counts = 163.560000, observed total counts = 138.000000
[Fri May 18 01:57:31 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 18 01:57:31 2012] Vigneting correction estimate = 1.000000
[Fri May 18 01:57:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 01:57:31 2012] Assessing source extent using major
[Fri May 18 01:57:31 2012] Source does appear to be extended
[Fri May 18 01:57:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 03:09:56 2012] XMMSAS src. selection expression = ellipse(39840.859283, 16220.445572, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 03:09:56 2012] Writing source region out to fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src3_src.reg
[Fri May 18 03:09:56 2012] Extracting stamp from image fullrun_mos1_xmm0005010201_pi300-10000_cl_sm2.00.img.gz, (421, 149) - (496, 224)
[Fri May 18 03:09:56 2012] XMMSAS bgd. selection expression = annulus(39840.859283, 16220.445572, 1087.500000, 2175.000000, X, Y)
[Fri May 18 03:09:56 2012] Writing fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src3.gif
[Fri May 18 03:16:29 2012] Mean detx,y = (12712.90, -10729.95) 
[Fri May 18 03:16:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 03:17:12 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 03:17:13 2012] Setting source spectrum file to fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 18 03:17:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 18 03:24:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 18 03:24:45 2012] rmf not generated due to insufficient counts
[Fri May 18 03:39:32 2012] Updating aperture counts using extracted products
[Fri May 18 03:39:32 2012] Error reading totcts from fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 18 03:39:32 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 03:39:32 2012] Using photon index=1.80, rate=0.00864, arf fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src3.arf
[Fri May 18 03:39:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 03:39:32 2012] Updating source flux to 3.1e-13
[Fri May 18 03:39:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting