[Thu May 17 22:53:39 2012] Detection parameters:
  Position = (293.1, 275.2) = 14 42 7.48 35 26 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24743.9 +/- 188.5
  Background counts = 106.8
  Rate = 0.9 +/- 0.007

[Thu May 17 22:53:39 2012] Off-axis axis estimate = 1.73'
[Fri May 18 00:12:20 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri May 18 00:12:20 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri May 18 00:12:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri May 18 00:12:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri May 18 00:24:33 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 18 00:24:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src1.csv
[Fri May 18 00:24:33 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 18 00:24:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src1.csv
[Fri May 18 00:24:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:24:33 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 18 00:24:33 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 18 00:24:33 2012] Fit fullrun_mos1_xmm0005010201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 18 00:36:01 2012] Spatial fit model total counts = 12868.800000, observed total counts = 12832.000000
[Fri May 18 00:36:01 2012] Offset between fit and detection position for source 1 = 0.197977 pixels
[Fri May 18 00:36:01 2012] 12884.640000 total counts/ 2867.440000 bgd. counts: snr = 187.067859
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.197977 pixels
  Position = (293.2, 275.4) = 14 42 7.46 35 26 23.5
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 10017.2 +/- 113.5
  Background counts = 2867.4
  Rate = 1 +/- 0.01
[Fri May 18 00:36:01 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:36:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:36:01 2012] Assessing source extent using major axis lower bound
[Fri May 18 00:36:01 2012] Source does appear to be extended
[Fri May 18 00:36:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 01:31:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 18 01:31:40 2012] Initial guess for spatial extent in simple fitting = 5.27"
[Fri May 18 01:31:40 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.023
[Fri May 18 01:31:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.27"
[Fri May 18 01:46:49 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 18 01:46:49 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 18 01:46:49 2012] Fit fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri May 18 01:46:49 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 18 01:46:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 18 01:46:49 2012] fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 18 01:46:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 18 01:46:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0005010201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 01:57:31 2012] Spatial fit model total counts = 12866.500000, observed total counts = 12832.000000
[Fri May 18 01:57:31 2012] Offset between fit and detection position for source 1 = 0.002518 pixels
[Fri May 18 01:57:31 2012] 12882.330000 total counts/ 2874.330000 bgd. counts: snr = 186.671915
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002518 pixels
  Position = (293.2, 275.4) = 14 42 7.46 35 26 23.5
  Extent = 5.4 (5.3-5.5)" x 5.1 (5.0-5.2)", rotation angle = -0
  Source counts = 10008.0 +/- 113.5
  Background counts = 2874.3
  Rate = 1 +/- 0.01
[Fri May 18 01:57:31 2012] Vigneting correction estimate = 1.000000
[Fri May 18 01:57:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 01:57:31 2012] Assessing source extent using major axis lower bound
[Fri May 18 01:57:31 2012] Source does appear to be extended
[Fri May 18 01:57:31 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Fri May 18 03:09:56 2012] Counts = 10008.000000, rescaling region sizes by 3.000000
[Fri May 18 03:09:56 2012] XMMSAS src. selection expression = ellipse(25457.163380, 23912.043600, 975.641428, 919.024226, -0.000000, X, Y)
[Fri May 18 03:09:56 2012] Writing source region out to fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src1_src.reg
[Fri May 18 03:09:56 2012] Extracting stamp from image fullrun_mos1_xmm0005010201_pi300-10000_cl_sm2.00.img.gz, (237, 219) - (349, 331)
[Fri May 18 03:09:56 2012] XMMSAS bgd. selection expression = annulus(25457.163380, 23912.043600, 4878.207140, 9756.414281, X, Y)
[Fri May 18 03:09:56 2012] Writing fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src1.gif
[Fri May 18 03:10:02 2012] Mean detx,y = (289.95, -203.49) 
[Fri May 18 03:10:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 03:16:24 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 03:16:24 2012] Setting source spectrum file to fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 18 03:16:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 18 03:39:32 2012] Updating aperture counts using extracted products
[Fri May 18 03:39:32 2012] Error reading totcts from fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 18 03:39:32 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 03:39:32 2012] Using photon index=1.80, rate=1.01, arf fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src1.arf
[Fri May 18 03:39:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 03:39:32 2012] Updating source flux to 9.7e-12
[Fri May 18 03:40:06 2012] Reading fit data from xmm0005010201/analysis//spectral/fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src1_pl.csv
[Fri May 18 03:40:06 2012] Spectral fit parameter nH value = 2.17587e+13
[Fri May 18 03:40:06 2012] Spectral fit parameter PhoIndex value = 2.88842
[Fri May 18 03:40:06 2012] Failed to get F(0.3-8.0) from xmm0005010201/analysis//spectral/fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri May 18 03:40:06 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 03:40:06 2012] Using Nh = 2.2e+13, photon index=2.89, rate=1.01, arf fullrun_mos1_xmm0005010201_pi300-10000_pass1_cl_src1.arf
[Fri May 18 03:40:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 03:40:06 2012] Updating source flux to 7.5e-12