[Fri Jul 13 03:47:54 2012] Detection parameters:
  Position = (292.6, 275.8) = 14 42 7.61 35 26 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41161.3 +/- 236.9
  Background counts = 22.2
  Rate = 2 +/- 0.009

[Fri Jul 13 03:47:54 2012] Off-axis axis estimate = 1.69'
[Fri Jul 13 04:22:14 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:22:14 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jul 13 04:22:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Fri Jul 13 04:22:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 04:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 04:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 04:46:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 04:46:18 2012] Fit fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 04:46:25 2012] Spatial fit model total counts = 35194.300000, observed total counts = 34149.000000
[Fri Jul 13 04:46:25 2012] Offset between fit and detection position for source 6 = 0.128216 pixels
[Fri Jul 13 04:46:25 2012] 35066.680000 total counts/ 8187.380000 bgd. counts: snr = 297.060892
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.128216 pixels
  Position = (292.7, 275.7) = 14 42 7.60 35 26 23.5
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 26879.3 +/- 187.3
  Background counts = 8187.4
  Rate = 1 +/- 0.007
[Fri Jul 13 04:46:25 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 04:46:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 04:46:25 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 04:46:25 2012] Source does appear to be extended
[Fri Jul 13 04:46:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 05:04:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 05:04:00 2012] Initial guess for spatial extent in simple fitting = 5.28"
[Fri Jul 13 05:04:00 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.766
[Fri Jul 13 05:04:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.28"
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 05:16:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 05:16:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 05:16:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 05:16:54 2012] Fit fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 13 05:16:58 2012] Spatial fit model total counts = 35045.600000, observed total counts = 34149.000000
[Fri Jul 13 05:16:58 2012] Offset between fit and detection position for source 6 = 0.016689 pixels
[Fri Jul 13 05:16:58 2012] 35157.100000 total counts/ 8127.000000 bgd. counts: snr = 299.835135
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.016689 pixels
  Position = (292.7, 275.7) = 14 42 7.60 35 26 23.4
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 27030.1 +/- 187.5
  Background counts = 8127.0
  Rate = 1 +/- 0.007
[Fri Jul 13 05:16:58 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 05:16:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 05:16:58 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 05:16:58 2012] Source does appear to be extended
[Fri Jul 13 05:16:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 06:32:00 2012] Counts = 27030.100000, rescaling region sizes by 3.000000
[Fri Jul 13 06:32:00 2012] XMMSAS src. selection expression = ellipse(25412.842800, 23937.159000, 957.393028, 957.393028, 0.000000, X, Y)
[Fri Jul 13 06:32:00 2012] Writing source region out to fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src6_src.reg
[Fri Jul 13 06:32:00 2012] Extracting stamp from image fullrun_mos2_xmm0005010101_pi300-10000_cl_sm2.00.img.gz, (238, 221) - (348, 331)
[Fri Jul 13 06:32:00 2012] XMMSAS bgd. selection expression = annulus(25412.842800, 23937.159000, 4786.965138, 9573.930275, X, Y) && !ellipse(24978.977020, 23050.552246, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 06:32:00 2012] Writing fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src6.gif
[Fri Jul 13 06:32:05 2012] Mean detx,y = (6.73, 31.32) 
[Fri Jul 13 06:32:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 06:34:30 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 06:34:30 2012] Setting source spectrum file to fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 13 06:34:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jul 13 06:41:05 2012] Updating aperture counts using extracted products
[Fri Jul 13 06:41:05 2012] Error reading totcts from fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 13 06:41:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 06:41:05 2012] Using photon index=1.80, rate=1.04, arf fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src6.arf
[Fri Jul 13 06:41:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 06:41:05 2012] Updating source flux to 1.1e-11
[Fri Jul 13 06:41:42 2012] Reading fit data from xmm0005010101/analysis//spectral/fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src6_pl.csv
[Fri Jul 13 06:41:42 2012] Spectral fit parameter nH value = 1.48704e+14
[Fri Jul 13 06:41:42 2012] Spectral fit parameter PhoIndex value = 2.72476
[Fri Jul 13 06:41:42 2012] Failed to get F(0.3-8.0) from xmm0005010101/analysis//spectral/fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Fri Jul 13 06:41:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 06:41:42 2012] Using Nh = 1.5e+14, photon index=2.72, rate=1.04, arf fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src6.arf
[Fri Jul 13 06:41:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 06:41:42 2012] Updating source flux to 8.6e-12