[Fri Jul 13 03:47:54 2012] Detection parameters:
  Position = (282.0, 273.9) = 14 42 11.40 35 26 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 16.9
  Background counts = 23.2
  Rate = 0.004 +/- 0.0008

[Fri Jul 13 03:47:54 2012] Off-axis axis estimate = 2.14'
[Fri Jul 13 04:22:14 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:22:14 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Fri Jul 13 04:22:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.657
[Fri Jul 13 04:22:14 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.50"
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jul 13 04:46:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src8.csv
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jul 13 04:46:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src8.csv
[Fri Jul 13 04:46:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jul 13 04:46:18 2012] Fit fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Jul 13 04:46:25 2012] Source 10 is offset by -6.918533 and -2.980683 pixels which is larger than
2 X fitted extent = 2.626561 x 2.626561, not incorporating fit results
[Fri Jul 13 04:46:25 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 04:46:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 04:46:25 2012] Assessing source extent using major
[Fri Jul 13 04:46:25 2012] Source does appear to be extended
[Fri Jul 13 04:46:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 05:04:00 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 05:04:00 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Fri Jul 13 05:04:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.657
[Fri Jul 13 05:04:00 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.50"
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jul 13 05:16:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src7.csv
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jul 13 05:16:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src7.csv
[Fri Jul 13 05:16:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jul 13 05:16:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jul 13 05:16:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jul 13 05:16:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:16:58 2012] Warning, spatial fit 7 centroid is now closest to src. 2
[Fri Jul 13 05:16:58 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 05:16:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 05:16:58 2012] Assessing source extent using major
[Fri Jul 13 05:16:58 2012] Source does appear to be extended
[Fri Jul 13 05:16:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 05:16:58 2012] Deleting source due to low Poisson probability 0.9