[Fri Jul 13 03:47:54 2012] Detection parameters:
  Position = (458.3, 186.7) = 14 41 8.72 35 19 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 226.2 +/- 18.4
  Background counts = 10.1
  Rate = 0.008 +/- 0.0007

[Fri Jul 13 03:47:54 2012] Off-axis axis estimate = 14.14'
[Fri Jul 13 04:22:14 2012] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:22:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 04:22:14 2012] Initial guess for spatial extent in simple fitting = 13.50"
[Fri Jul 13 04:22:14 2012] source mask rpix=3.1, npix_max = 51, mask sum = 45, frac = 0.867
[Fri Jul 13 04:22:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.50"
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 13 04:46:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src3.csv
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 13 04:46:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src3.csv
[Fri Jul 13 04:46:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 13 04:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jul 13 04:46:18 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 13 04:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jul 13 04:46:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:46:25 2012] Source 1 is offset by 1.001070 and -9.783614 pixels which is larger than
2 X fitted extent = 8.964736 x 8.964736, not incorporating fit results
[Fri Jul 13 04:46:25 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 04:46:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 04:46:25 2012] Assessing source extent using major
[Fri Jul 13 04:46:25 2012] Source does appear to be extended
[Fri Jul 13 04:46:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 05:04:00 2012] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 05:04:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 05:04:00 2012] Initial guess for spatial extent in simple fitting = 13.50"
[Fri Jul 13 05:04:00 2012] source mask rpix=3.1, npix_max = 51, mask sum = 45, frac = 0.867
[Fri Jul 13 05:04:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.50"
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 13 05:16:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 13 05:16:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 05:16:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 13 05:16:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 13 05:16:54 2012] fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 13 05:16:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 13 05:16:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:16:58 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.760935 pixels away
[Fri Jul 13 05:16:58 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 05:16:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 05:16:58 2012] Assessing source extent using major
[Fri Jul 13 05:16:58 2012] Source does appear to be extended
[Fri Jul 13 05:16:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 06:32:00 2012] XMMSAS src. selection expression = ellipse(39821.156311, 16192.757599, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 13 06:32:00 2012] Writing source region out to fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 13 06:32:00 2012] Extracting stamp from image fullrun_mos2_xmm0005010101_pi300-10000_cl_sm2.00.img.gz, (421, 149) - (496, 224)
[Fri Jul 13 06:32:00 2012] XMMSAS bgd. selection expression = annulus(39821.156311, 16192.757599, 1087.500000, 2175.000000, X, Y)
[Fri Jul 13 06:32:00 2012] Writing fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src1.gif
[Fri Jul 13 06:34:32 2012] Mean detx,y = (10549.62, 12502.82) 
[Fri Jul 13 06:34:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 06:34:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 06:34:45 2012] Setting source spectrum file to fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 06:34:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 13 06:38:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 13 06:38:37 2012] rmf not generated due to insufficient counts
[Fri Jul 13 06:41:05 2012] Updating aperture counts using extracted products
[Fri Jul 13 06:41:05 2012] Error reading totcts from fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 06:41:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 06:41:05 2012] Using photon index=1.80, rate=0.00825, arf fullrun_mos2_xmm0005010101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 13 06:41:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 06:41:05 2012] Updating source flux to 3.1e-13
[Fri Jul 13 06:41:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting