[Fri Jul 13 03:47:35 2012] Detection parameters:
  Position = (292.6, 275.8) = 14 42 7.61 35 26 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41359.2 +/- 240.6
  Background counts = 26.8
  Rate = 2 +/- 0.009

[Fri Jul 13 03:47:35 2012] Off-axis axis estimate = 1.69'
[Fri Jul 13 04:11:04 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:11:04 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jul 13 04:11:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Fri Jul 13 04:11:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Jul 13 04:22:13 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 04:22:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 04:22:13 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 04:22:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 04:22:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:22:13 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 04:22:13 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 04:22:13 2012] Fit fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 04:46:22 2012] Spatial fit model total counts = 33728.000000, observed total counts = 33728.000000
[Fri Jul 13 04:46:22 2012] Offset between fit and detection position for source 5 = 0.147225 pixels
[Fri Jul 13 04:46:22 2012] 33754.310000 total counts/ 6945.010000 bgd. counts: snr = 321.698501
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.147225 pixels
  Position = (292.7, 275.7) = 14 42 7.60 35 26 23.3
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 26809.3 +/- 183.7
  Background counts = 6945.0
  Rate = 1 +/- 0.007
[Fri Jul 13 04:46:22 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 04:46:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 04:46:22 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 04:46:22 2012] Source does appear to be extended
[Fri Jul 13 04:46:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 04:56:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:56:39 2012] Initial guess for spatial extent in simple fitting = 5.43"
[Fri Jul 13 04:56:39 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.737
[Fri Jul 13 04:56:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.43"
[Fri Jul 13 05:04:00 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 05:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 05:04:00 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 05:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 05:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:04:00 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 05:04:00 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 05:04:00 2012] Fit fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 13 05:16:56 2012] Spatial fit model total counts = 33838.000000, observed total counts = 33784.000000
[Fri Jul 13 05:16:56 2012] Offset between fit and detection position for source 5 = 0.009940 pixels
[Fri Jul 13 05:16:56 2012] 33984.150000 total counts/ 7149.250000 bgd. counts: snr = 317.372826
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.009940 pixels
  Position = (292.7, 275.7) = 14 42 7.60 35 26 23.2
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 26834.9 +/- 184.3
  Background counts = 7149.2
  Rate = 1 +/- 0.007
[Fri Jul 13 05:16:56 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 05:16:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 05:16:56 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 05:16:56 2012] Source does appear to be extended
[Fri Jul 13 05:16:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 06:11:57 2012] Counts = 26834.900000, rescaling region sizes by 3.000000
[Fri Jul 13 06:11:57 2012] XMMSAS src. selection expression = ellipse(25412.717600, 23933.837800, 977.824828, 977.824828, 0.000000, X, Y)
[Fri Jul 13 06:11:57 2012] Writing source region out to fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src5_src.reg
[Fri Jul 13 06:11:57 2012] Extracting stamp from image fullrun_mos1_xmm0005010101_pi300-10000_cl_sm2.00.img.gz, (236, 219) - (349, 332)
[Fri Jul 13 06:11:57 2012] XMMSAS bgd. selection expression = annulus(25412.717600, 23933.837800, 4889.124141, 9778.248281, X, Y) && !ellipse(31695.481720, 16900.570400, 572.356016, 572.356016, 0.000000, X, Y) && !ellipse(18921.627320, 17442.600600, 417.598412, 417.598412, 0.000000, X, Y)
[Fri Jul 13 06:11:57 2012] Writing fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src5.gif
[Fri Jul 13 06:12:02 2012] Mean detx,y = (251.36, -165.49) 
[Fri Jul 13 06:12:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 06:14:19 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 06:14:19 2012] Setting source spectrum file to fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 13 06:14:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jul 13 06:41:05 2012] Updating aperture counts using extracted products
[Fri Jul 13 06:41:05 2012] Error reading totcts from fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 13 06:41:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 06:41:05 2012] Using photon index=1.80, rate=1.04, arf fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src5.arf
[Fri Jul 13 06:41:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 06:41:05 2012] Updating source flux to 9.7e-12
[Fri Jul 13 06:41:25 2012] Reading fit data from xmm0005010101/analysis//spectral/fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src5_pl.csv
[Fri Jul 13 06:41:25 2012] Spectral fit parameter nH value = 587923000000.0
[Fri Jul 13 06:41:25 2012] Spectral fit parameter PhoIndex value = 2.7749
[Fri Jul 13 06:41:25 2012] Failed to get F(0.3-8.0) from xmm0005010101/analysis//spectral/fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Fri Jul 13 06:41:25 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 06:41:25 2012] Using Nh = 5.9e+11, photon index=2.77, rate=1.04, arf fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src5.arf
[Fri Jul 13 06:41:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 06:41:25 2012] Updating source flux to 7.6e-12