[Fri Jul 13 03:47:35 2012] Detection parameters:
  Position = (218.2, 200.9) = 14 42 34.08 35 20 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.0 +/- 14.7
  Background counts = 17.3
  Rate = 0.007 +/- 0.0008

[Fri Jul 13 03:47:35 2012] Off-axis axis estimate = 9.16'
[Fri Jul 13 04:11:04 2012] Using EEF radius (= 11.01 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:11:04 2012] Initial guess for spatial extent in simple fitting = 11.01"
[Fri Jul 13 04:11:04 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.980
[Fri Jul 13 04:11:04 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.01"
[Fri Jul 13 04:22:13 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jul 13 04:22:13 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jul 13 04:22:13 2012] Fit fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_src4 appears to have run properly
[Fri Jul 13 04:22:13 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul 13 04:22:13 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul 13 04:22:13 2012] Fit fullrun_mos1_xmm0005010101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jul 13 04:46:22 2012] Spatial fit model total counts = 194.666000, observed total counts = 187.000000
[Fri Jul 13 04:46:22 2012] Offset between fit and detection position for source 2 = 0.184355 pixels
[Fri Jul 13 04:46:22 2012] 195.195500 total counts/ 118.186000 bgd. counts: snr = 7.083718
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.184355 pixels
  Position = (218.0, 201.0) = 14 42 34.12 35 20 58.4
  Extent = 5.2 (4.4-6.4)", rotation angle = 0
  Source counts = 77.0 +/- 14.0
  Background counts = 118.2
  Rate = 0.003 +/- 0.0005
[Fri Jul 13 04:46:22 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 04:46:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 04:46:22 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 04:46:22 2012] Source does appear to be extended
[Fri Jul 13 04:46:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 04:56:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:56:39 2012] Initial guess for spatial extent in simple fitting = 5.22"
[Fri Jul 13 04:56:39 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.384
[Fri Jul 13 04:56:39 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.22"
[Fri Jul 13 05:04:00 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jul 13 05:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src4.csv
[Fri Jul 13 05:04:00 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jul 13 05:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src4.csv
[Fri Jul 13 05:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:04:00 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul 13 05:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jul 13 05:04:00 2012] fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul 13 05:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jul 13 05:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0005010101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:16:56 2012] Warning, spatial fit 4 centroid is now closest to src. 1
[Fri Jul 13 05:16:56 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 05:16:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 05:16:56 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 05:16:56 2012] Source does appear to be extended
[Fri Jul 13 05:16:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 06:11:57 2012] XMMSAS src. selection expression = ellipse(18921.627320, 17442.600600, 313.198809, 313.198809, 0.000000, X, Y)
[Fri Jul 13 06:11:57 2012] Writing source region out to fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 13 06:11:57 2012] Extracting stamp from image fullrun_mos1_xmm0005010101_pi300-10000_cl_sm2.00.img.gz, (200, 183) - (236, 219)
[Fri Jul 13 06:11:57 2012] XMMSAS bgd. selection expression = annulus(18921.627320, 17442.600600, 521.998015, 1043.996030, X, Y)
[Fri Jul 13 06:11:57 2012] Writing fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src2.gif
[Fri Jul 13 06:14:50 2012] Mean detx,y = (3874.19, 8270.96) 
[Fri Jul 13 06:14:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 06:14:58 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 06:14:58 2012] Setting source spectrum file to fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 13 06:14:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 13 06:31:56 2012] Not generating rmf since there are only 77 counts
[Fri Jul 13 06:31:56 2012] rmf not generated due to insufficient counts
[Fri Jul 13 06:41:05 2012] Updating aperture counts using extracted products
[Fri Jul 13 06:41:05 2012] Error reading totcts from fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 13 06:41:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 06:41:05 2012] Using photon index=1.80, rate=0.00299, arf fullrun_mos1_xmm0005010101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 13 06:41:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 06:41:05 2012] Updating source flux to 5.8e-14
[Fri Jul 13 06:41:06 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting