[Sun May 20 08:44:21 2012] Detection parameters:
  Position = (265.3, 444.5) = 18 22 23.43 68 38 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.1 +/- 15.0
  Background counts = 44.7
  Rate = 0.004 +/- 0.0006

[Sun May 20 08:44:21 2012] Off-axis axis estimate = 10.86'
[Sun May 20 09:26:27 2012] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Sun May 20 09:26:27 2012] Initial guess for spatial extent in simple fitting = 11.86"
[Sun May 20 09:26:27 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.009
[Sun May 20 09:26:27 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 11.86"
[Sun May 20 09:39:50 2012] fullrun_mos2_xmm0004610301_pi300-10000_cl_pass0_src8.ximg exists
[Sun May 20 09:39:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0004610301_pi300-10000_cl_pass0_src8.csv
[Sun May 20 09:39:50 2012] fullrun_mos2_xmm0004610301_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun May 20 09:39:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0004610301_pi300-10000_cl_pass0_src8.csv
[Sun May 20 09:39:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0004610301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0004610301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 09:39:50 2012] fullrun_mos2_xmm0004610301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun May 20 09:39:50 2012] fullrun_mos2_xmm0004610301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May 20 09:39:50 2012] Fit fullrun_mos2_xmm0004610301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun May 20 09:39:57 2012] Spatial fit model total counts = 104.169000, observed total counts = 104.000000
[Sun May 20 09:39:57 2012] Offset between fit and detection position for source 2 = 0.546475 pixels
[Sun May 20 09:39:57 2012] 101.734100 total counts/ 51.216100 bgd. counts: snr = 7.058995
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.546475 pixels
  Position = (264.7, 444.6) = 18 22 23.86 68 38 25.8
  Extent = 7.1 (5.3-9.4)", rotation angle = 0
  Source counts = 50.5 +/- 10.1
  Background counts = 51.2
  Rate = 0.003 +/- 0.0006
[Sun May 20 09:39:57 2012] Vigneting correction estimate = 1.000000
[Sun May 20 09:39:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 09:39:57 2012] Assessing source extent using major axis lower bound
[Sun May 20 09:39:57 2012] Source does appear to be extended
[Sun May 20 09:39:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 10:36:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 10:36:28 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Sun May 20 10:36:28 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.106
[Sun May 20 10:36:28 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.07"
[Sun May 20 10:58:00 2012] fullrun_mos2_xmm0004610301_pi300-10000_cl_pass1_src8.ximg exists
[Sun May 20 10:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0004610301_pi300-10000_cl_pass1_src8.csv
[Sun May 20 10:58:00 2012] fullrun_mos2_xmm0004610301_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun May 20 10:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0004610301_pi300-10000_cl_pass1_src8.csv
[Sun May 20 10:58:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0004610301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0004610301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 10:58:00 2012] fullrun_mos2_xmm0004610301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun May 20 10:58:00 2012] fullrun_mos2_xmm0004610301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun May 20 10:58:00 2012] Fit fullrun_mos2_xmm0004610301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun May 20 10:58:14 2012] Spatial fit model total counts = 104.209000, observed total counts = 105.000000
[Sun May 20 10:58:14 2012] Offset between fit and detection position for source 2 = 0.027149 pixels
[Sun May 20 10:58:14 2012] 101.763300 total counts/ 51.397800 bgd. counts: snr = 7.025235
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.027149 pixels
  Position = (264.7, 444.6) = 18 22 23.88 68 38 25.7
  Extent = 7.2 (5.3-9.4)", rotation angle = 0
  Source counts = 50.4 +/- 10.1
  Background counts = 51.4
  Rate = 0.003 +/- 0.0006
[Sun May 20 10:58:14 2012] Vigneting correction estimate = 1.000000
[Sun May 20 10:58:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 10:58:14 2012] Assessing source extent using major axis lower bound
[Sun May 20 10:58:14 2012] Source does appear to be extended
[Sun May 20 10:58:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 11:51:52 2012] XMMSAS src. selection expression = ellipse(22979.194800, 38628.662400, 432.484072, 432.484072, 0.000000, X, Y)
[Sun May 20 11:51:52 2012] Writing source region out to fullrun_mos2_xmm0004610301_pi300-10000_pass1_cl_src2_src.reg
[Sun May 20 11:51:52 2012] Extracting stamp from image fullrun_mos2_xmm0004610301_pi300-10000_cl_sm2.00.img.gz, (240, 420) - (290, 469)
[Sun May 20 11:51:52 2012] XMMSAS bgd. selection expression = annulus(22979.194800, 38628.662400, 720.806786, 1441.613573, X, Y)
[Sun May 20 11:51:52 2012] Writing fullrun_mos2_xmm0004610301_pi300-10000_pass1_cl_src2.gif
[Sun May 20 11:55:05 2012] Mean detx,y = (13323.42, 3150.16) 
[Sun May 20 11:55:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 11:55:22 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 11:55:22 2012] Setting source spectrum file to fullrun_mos2_xmm0004610301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 20 11:55:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0004610301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 20 12:02:37 2012] Not generating rmf since there are only 50 counts
[Sun May 20 12:02:37 2012] rmf not generated due to insufficient counts
[Sun May 20 12:03:22 2012] Updating aperture counts using extracted products
[Sun May 20 12:03:22 2012] Error reading totcts from fullrun_mos2_xmm0004610301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 20 12:03:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 12:03:23 2012] Using photon index=1.80, rate=0.00323, arf fullrun_mos2_xmm0004610301_pi300-10000_pass1_cl_src2.arf
[Sun May 20 12:03:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 12:03:23 2012] Updating source flux to 9.9e-14
[Sun May 20 12:03:44 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting