[Sun May 20 08:44:10 2012] Detection parameters:
  Position = (353.4, 137.6) = 18 21 13.92 68 16 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.9 +/- 15.2
  Background counts = 53.1
  Rate = 0.003 +/- 0.0006

[Sun May 20 08:44:10 2012] Off-axis axis estimate = 12.33'
[Sun May 20 09:11:08 2012] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Sun May 20 09:11:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 20 09:11:08 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Sun May 20 09:11:08 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.063
[Sun May 20 09:11:08 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.59"
[Sun May 20 09:26:26 2012] fullrun_mos1_xmm0004610301_pi300-10000_cl_pass0_src7.ximg exists
[Sun May 20 09:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0004610301_pi300-10000_cl_pass0_src7.csv
[Sun May 20 09:26:26 2012] fullrun_mos1_xmm0004610301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun May 20 09:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0004610301_pi300-10000_cl_pass0_src7.csv
[Sun May 20 09:26:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0004610301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0004610301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 09:26:27 2012] fullrun_mos1_xmm0004610301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun May 20 09:26:27 2012] fullrun_mos1_xmm0004610301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 20 09:26:27 2012] Fit fullrun_mos1_xmm0004610301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun May 20 09:39:56 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 15.170327 pixels away
[Sun May 20 09:39:56 2012] Vigneting correction estimate = 1.000000
[Sun May 20 09:39:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 09:39:56 2012] Assessing source extent using major
[Sun May 20 09:39:56 2012] Source does appear to be extended
[Sun May 20 09:39:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 10:11:07 2012] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:11:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 20 10:11:07 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Sun May 20 10:11:07 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.063
[Sun May 20 10:11:07 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.59"
[Sun May 20 10:36:28 2012] fullrun_mos1_xmm0004610301_pi300-10000_cl_pass1_src7.ximg exists
[Sun May 20 10:36:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0004610301_pi300-10000_cl_pass1_src7.csv
[Sun May 20 10:36:28 2012] fullrun_mos1_xmm0004610301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun May 20 10:36:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0004610301_pi300-10000_cl_pass1_src7.csv
[Sun May 20 10:36:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0004610301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0004610301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 10:36:28 2012] fullrun_mos1_xmm0004610301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun May 20 10:36:28 2012] fullrun_mos1_xmm0004610301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May 20 10:36:28 2012] Fit fullrun_mos1_xmm0004610301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun May 20 10:58:11 2012] Spatial fit model total counts = 146.407000, observed total counts = 147.000000
[Sun May 20 10:58:11 2012] Offset between fit and detection position for source 12 = 0.447635 pixels
[Sun May 20 10:58:11 2012] 146.455300 total counts/ 98.881700 bgd. counts: snr = 4.784186
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.447635 pixels
  Position = (353.0, 137.4) = 18 21 14.26 68 16 9.6
  Extent = 7.2 (4.6-10.5)", rotation angle = 0
  Source counts = 47.6 +/- 12.1
  Background counts = 98.9
  Rate = 0.003 +/- 0.0008
[Sun May 20 10:58:11 2012] Vigneting correction estimate = 1.000000
[Sun May 20 10:58:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 10:58:11 2012] Assessing source extent using major axis lower bound
[Sun May 20 10:58:11 2012] Source does appear to be extended
[Sun May 20 10:58:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 11:27:59 2012] XMMSAS src. selection expression = ellipse(30663.665110, 11909.644600, 431.272212, 431.272212, 0.000000, X, Y)
[Sun May 20 11:27:59 2012] Writing source region out to fullrun_mos1_xmm0004610301_pi300-10000_pass1_cl_src12_src.reg
[Sun May 20 11:27:59 2012] Extracting stamp from image fullrun_mos1_xmm0004610301_pi300-10000_cl_sm2.00.img.gz, (328, 113) - (378, 162)
[Sun May 20 11:27:59 2012] XMMSAS bgd. selection expression = annulus(30663.665110, 11909.644600, 718.787021, 1437.574041, X, Y)
[Sun May 20 11:27:59 2012] Writing fullrun_mos1_xmm0004610301_pi300-10000_pass1_cl_src12.gif
[Sun May 20 11:31:58 2012] Mean detx,y = (-5509.18, 12841.21) 
[Sun May 20 11:32:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 11:32:15 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 11:32:15 2012] Setting source spectrum file to fullrun_mos1_xmm0004610301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun May 20 11:32:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0004610301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun May 20 11:39:40 2012] Not generating rmf since there are only 47 counts
[Sun May 20 11:39:40 2012] rmf not generated due to insufficient counts
[Sun May 20 12:03:20 2012] Updating aperture counts using extracted products
[Sun May 20 12:03:20 2012] Error reading totcts from fullrun_mos1_xmm0004610301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun May 20 12:03:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 12:03:21 2012] Using photon index=1.80, rate=0.00308, arf fullrun_mos1_xmm0004610301_pi300-10000_pass1_cl_src12.arf
[Sun May 20 12:03:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 12:03:21 2012] Updating source flux to 6.8e-14
[Sun May 20 12:03:24 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting