[Wed May 16 10:24:19 2012] Detection parameters:
  Position = (480.9, 314.2) = 2 3 48.04 64 50 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.9 +/- 8.4
  Background counts = 4.9
  Rate = 0.002 +/- 0.0004

[Wed May 16 10:24:20 2012] Off-axis axis estimate = 13.28'
[Wed May 16 11:51:08 2012] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Wed May 16 11:51:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 11:51:08 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Wed May 16 11:51:08 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998
[Wed May 16 11:51:08 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.07"
[Wed May 16 12:16:55 2012] fullrun_mos2_xmm0004010201_pi300-10000_cl_pass0_src6.ximg exists
[Wed May 16 12:16:55 2012] fullrun_mos2_xmm0004010201_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed May 16 12:16:55 2012] Fit fullrun_mos2_xmm0004010201_pi300-10000_cl_pass0_src6 appears to have run properly
[Wed May 16 12:16:55 2012] fullrun_mos2_xmm0004010201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed May 16 12:16:55 2012] fullrun_mos2_xmm0004010201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed May 16 12:16:55 2012] Fit fullrun_mos2_xmm0004010201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed May 16 12:17:07 2012] Spatial fit model total counts = 126.682000, observed total counts = 127.000000
[Wed May 16 12:17:07 2012] Offset between fit and detection position for source 1 = 0.290858 pixels
[Wed May 16 12:17:07 2012] 128.181800 total counts/ 100.310000 bgd. counts: snr = 2.782870
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.290858 pixels
  Position = (480.6, 314.2) = 2 3 48.24 64 50 6.2
  Extent = 6.2 (4.3-9.4)" x 3.6 (3.3-5.1)", rotation angle = 60 (28-152) degrees
  Source counts = 27.9 +/- 11.3
  Background counts = 100.3
  Rate = 0.001 +/- 0.0005
[Wed May 16 12:17:07 2012] Vigneting correction estimate = 1.000000
[Wed May 16 12:17:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 12:17:07 2012] Assessing source extent using major axis lower bound
[Wed May 16 12:17:07 2012] Source does appear to be extended
[Wed May 16 12:17:07 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Wed May 16 12:17:07 2012] Source is confused with source 2
[Wed May 16 13:11:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 13:11:33 2012] Initial guess for spatial extent in simple fitting = 4.90"
[Wed May 16 13:11:33 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.852
[Wed May 16 13:11:33 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 4.90"
[Wed May 16 13:33:42 2012] fullrun_mos2_xmm0004010201_pi300-10000_cl_pass1_src6.ximg exists
[Wed May 16 13:33:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0004010201_pi300-10000_cl_pass1_src6.csv
[Wed May 16 13:33:42 2012] fullrun_mos2_xmm0004010201_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed May 16 13:33:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0004010201_pi300-10000_cl_pass1_src6.csv
[Wed May 16 13:33:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0004010201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0004010201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 13:33:42 2012] fullrun_mos2_xmm0004010201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed May 16 13:33:42 2012] fullrun_mos2_xmm0004010201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed May 16 13:33:42 2012] Fit fullrun_mos2_xmm0004010201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed May 16 13:33:53 2012] Spatial fit model total counts = 108.698000, observed total counts = 107.000000
[Wed May 16 13:33:53 2012] Offset between fit and detection position for source 1 = 0.101500 pixels
[Wed May 16 13:33:53 2012] 110.988400 total counts/ 83.830300 bgd. counts: snr = 2.966189
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.101500 pixels
  Position = (480.7, 314.2) = 2 3 48.17 64 50 6.3
  Extent = 4.7 (3.5-6.6)", rotation angle = 0
  Source counts = 27.2 +/- 10.5
  Background counts = 83.8
  Rate = 0.001 +/- 0.0005
[Wed May 16 13:33:53 2012] Vigneting correction estimate = 1.000000
[Wed May 16 13:33:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 13:33:53 2012] Assessing source extent using major axis lower bound
[Wed May 16 13:33:53 2012] Source does appear to be extended
[Wed May 16 13:33:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 15:09:22 2012] XMMSAS src. selection expression = ellipse(41772.178800, 27289.376600, 279.525608, 279.525608, 0.000000, X, Y)
[Wed May 16 15:09:22 2012] Writing source region out to fullrun_mos2_xmm0004010201_pi300-10000_pass1_cl_src1_src.reg
[Wed May 16 15:09:22 2012] Extracting stamp from image fullrun_mos2_xmm0004010201_pi300-10000_cl_sm2.00.img.gz, (465, 298) - (497, 330)
[Wed May 16 15:09:22 2012] XMMSAS bgd. selection expression = annulus(41772.178800, 27289.376600, 465.876013, 931.752027, X, Y) && !ellipse(40693.978000, 28302.894000, 2051.664059, 2051.664059, 0.000000, X, Y)
[Wed May 16 15:09:22 2012] Writing fullrun_mos2_xmm0004010201_pi300-10000_pass1_cl_src1.gif
[Wed May 16 15:11:13 2012] Mean detx,y = (-11204.53, 8339.25) 
[Wed May 16 15:11:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 15:11:28 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 15:11:28 2012] Setting source spectrum file to fullrun_mos2_xmm0004010201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 16 15:11:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0004010201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 16 15:14:30 2012] Not generating rmf since there are only 27 counts
[Wed May 16 15:14:30 2012] rmf not generated due to insufficient counts
[Wed May 16 15:15:19 2012] Updating aperture counts using extracted products
[Wed May 16 15:15:19 2012] Error reading totcts from fullrun_mos2_xmm0004010201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 16 15:15:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 15:15:20 2012] Using photon index=1.80, rate=0.00123, arf fullrun_mos2_xmm0004010201_pi300-10000_pass1_cl_src1.arf
[Wed May 16 15:15:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 15:15:20 2012] Updating source flux to 4.3e-14
[Wed May 16 15:15:22 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed May 16 15:15:22 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 16 15:15:23 2012] xmm0004010201/analysis//spectral/fullrun_mos2_xmm0004010201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete