[Mon Jul 16 14:48:52 2012] Detection parameters:
  Position = (398.0, 348.3) = 2 22 39.46 43 2 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15527.0 +/- 150.7
  Background counts = 43.7
  Rate = 1 +/- 0.01

[Mon Jul 16 14:48:54 2012] Off-axis axis estimate = 8.07'
[Mon Jul 16 14:51:42 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 14:51:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 14:51:42 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Mon Jul 16 14:51:42 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Mon Jul 16 14:51:42 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.47"
[Mon Jul 16 15:52:05 2012] fullrun_pn_xmm0002970201_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jul 16 15:52:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0002970201_pi300-10000_cl_pass0_src2.csv
[Mon Jul 16 15:52:05 2012] fullrun_pn_xmm0002970201_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jul 16 15:52:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0002970201_pi300-10000_cl_pass0_src2.csv
[Mon Jul 16 15:52:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0002970201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0002970201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 15:52:05 2012] fullrun_pn_xmm0002970201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jul 16 15:52:05 2012] fullrun_pn_xmm0002970201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jul 16 15:52:05 2012] Fit fullrun_pn_xmm0002970201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Jul 16 17:05:34 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.062729 pixels away
[Mon Jul 16 17:05:34 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 17:05:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 17:05:34 2012] Assessing source extent using major
[Mon Jul 16 17:05:34 2012] Source does appear to be extended
[Mon Jul 16 17:05:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 17:05:57 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 17:05:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 17:05:57 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Mon Jul 16 17:05:57 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Mon Jul 16 17:05:57 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.47"
[Mon Jul 16 18:08:44 2012] fullrun_pn_xmm0002970201_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jul 16 18:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0002970201_pi300-10000_cl_pass1_src2.csv
[Mon Jul 16 18:08:44 2012] fullrun_pn_xmm0002970201_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jul 16 18:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0002970201_pi300-10000_cl_pass1_src2.csv
[Mon Jul 16 18:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0002970201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0002970201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 18:08:44 2012] fullrun_pn_xmm0002970201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jul 16 18:08:44 2012] fullrun_pn_xmm0002970201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jul 16 18:08:44 2012] Fit fullrun_pn_xmm0002970201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Jul 16 19:16:22 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.131214 pixels away
[Mon Jul 16 19:16:22 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 19:16:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 19:16:22 2012] Assessing source extent using major
[Mon Jul 16 19:16:22 2012] Source does appear to be extended
[Mon Jul 16 19:16:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 19:16:40 2012] Counts = 15527.020508, rescaling region sizes by 3.000000
[Mon Jul 16 19:16:40 2012] XMMSAS src. selection expression = ellipse(34581.554230, 30250.065094, 1957.500000, 1957.500000, 0.000000, X, Y)
[Mon Jul 16 19:16:40 2012] Writing source region out to fullrun_pn_xmm0002970201_pi300-10000_pass1_cl_src2_src.reg
[Mon Jul 16 19:16:40 2012] Extracting stamp from image fullrun_pn_xmm0002970201_pi300-10000_cl_sm2.00.img.gz, (286, 236) - (511, 461)
[Mon Jul 16 19:16:40 2012] XMMSAS bgd. selection expression = annulus(34581.554230, 30250.065094, 9787.500000, 19575.000000, X, Y) && !ellipse(27564.240800, 27143.250600, 479.618414, 479.618414, 0.000000, X, Y) && !ellipse(15147.696915, 31820.172424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22438.074158, 32906.472351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32370.379456, 18237.869583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30853.940927, 32053.010108, 518.166296, 391.306004, 27.297943, X, Y) && !ellipse(21562.809235, 31794.686798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39723.291788, 26565.452456, 558.600246, 417.243714, 93.074137, X, Y) && !ellipse(27470.967200, 22301.111200, 433.884012, 433.884012, 0.000000, X, Y) && !ellipse(17138.950302, 21972.497513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15699.662821, 42458.629652, 931.574259, 296.330517, 318.038372, X, Y) && !ellipse(20793.379089, 43709.436096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30167.451202, 41227.904999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34718.699768, 35950.962585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36479.629364, 35700.394196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25811.588898, 33470.217377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36049.251770, 33450.198456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20522.690887, 33195.164307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37627.921570, 32733.406921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36471.343800, 32439.546000, 479.120814, 479.120814, 0.000000, X, Y) && !ellipse(22041.242120, 29210.674400, 379.855211, 379.855211, 0.000000, X, Y) && !ellipse(30474.470040, 28563.001000, 485.638414, 485.638414, 0.000000, X, Y) && !ellipse(37162.848053, 18843.962326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26926.968680, 25506.552000, 474.118414, 474.118414, 0.000000, X, Y) && !ellipse(19826.187600, 18837.847200, 666.306419, 666.306419, 0.000000, X, Y) && !ellipse(17709.830719, 24243.111755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36957.101868, 23806.290405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25694.563171, 23801.875092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25454.822600, 22684.464200, 494.329614, 370.349611, 39.337000, X, Y) && !ellipse(22254.043400, 21212.571400, 354.052010, 354.052010, 0.000000, X, Y) && !ellipse(21200.960000, 20013.964000, 1479.656043, 1479.656043, 0.000000, X, Y) && !ellipse(23087.143860, 20372.195862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22440.121185, 20419.154037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14675.560800, 19840.361200, 431.392012, 431.392012, 0.000000, X, Y) && !ellipse(23534.210968, 45716.239990, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 19:16:40 2012] Writing fullrun_pn_xmm0002970201_pi300-10000_pass1_cl_src2.gif
[Mon Jul 16 19:18:42 2012] Mean detx,y = (5692.61, -5430.73) 
[Mon Jul 16 19:18:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 19:27:24 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 19:27:24 2012] Setting source spectrum file to fullrun_pn_xmm0002970201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jul 16 19:27:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0002970201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jul 16 19:52:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 16 19:52:55 2012] rmf not generated due to insufficient counts
[Mon Jul 16 21:14:59 2012] Updating aperture counts using extracted products
[Mon Jul 16 21:14:59 2012] Error reading totcts from fullrun_pn_xmm0002970201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jul 16 21:14:59 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 21:14:59 2012] Using photon index=1.80, rate=1.2, arf fullrun_pn_xmm0002970201_pi300-10000_pass1_cl_src2.arf
[Mon Jul 16 21:14:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 21:14:59 2012] Updating source flux to 3.7e-12
[Mon Jul 16 21:16:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting