[Mon Jul 16 14:49:45 2012] Detection parameters:
  Position = (398.0, 348.2) = 2 22 39.47 43 2 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5317.6 +/- 87.9
  Background counts = 16.8
  Rate = 0.4 +/- 0.006

[Mon Jul 16 14:49:46 2012] Off-axis axis estimate = 8.07'
[Mon Jul 16 16:29:16 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 16:29:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 16:29:16 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Mon Jul 16 16:29:16 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Mon Jul 16 16:29:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.46"
[Mon Jul 16 17:05:24 2012] fullrun_mos2_xmm0002970201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 16 17:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002970201_pi300-10000_cl_pass0_src1.csv
[Mon Jul 16 17:05:24 2012] fullrun_mos2_xmm0002970201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 16 17:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002970201_pi300-10000_cl_pass0_src1.csv
[Mon Jul 16 17:05:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0002970201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0002970201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 17:05:24 2012] fullrun_mos2_xmm0002970201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 16 17:05:24 2012] fullrun_mos2_xmm0002970201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 16 17:05:24 2012] Fit fullrun_mos2_xmm0002970201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul 16 17:05:46 2012] Spatial fit model total counts = 4897.000000, observed total counts = 4909.000000
[Mon Jul 16 17:05:46 2012] Offset between fit and detection position for source 1 = 0.322918 pixels
[Mon Jul 16 17:05:46 2012] 4901.130000 total counts/ 1098.240000 bgd. counts: snr = 114.753287
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.322918 pixels
  Position = (397.7, 348.3) = 2 22 39.59 43 2 6.6
  Extent = 5.6 (5.5-5.8)", rotation angle = 0
  Source counts = 3802.9 +/- 70.0
  Background counts = 1098.2
  Rate = 0.2 +/- 0.003
[Mon Jul 16 17:05:46 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 17:05:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 17:05:46 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 17:05:46 2012] Source does appear to be extended
[Mon Jul 16 17:05:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 18:42:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 18:42:52 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Mon Jul 16 18:42:52 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.929
[Mon Jul 16 18:42:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.64"
[Mon Jul 16 19:16:13 2012] fullrun_mos2_xmm0002970201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 16 19:16:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002970201_pi300-10000_cl_pass1_src1.csv
[Mon Jul 16 19:16:13 2012] fullrun_mos2_xmm0002970201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 16 19:16:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002970201_pi300-10000_cl_pass1_src1.csv
[Mon Jul 16 19:16:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0002970201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0002970201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:16:13 2012] fullrun_mos2_xmm0002970201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 16 19:16:13 2012] fullrun_mos2_xmm0002970201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 16 19:16:13 2012] Fit fullrun_mos2_xmm0002970201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 16 19:16:30 2012] Spatial fit model total counts = 4753.000000, observed total counts = 4753.000000
[Mon Jul 16 19:16:30 2012] Offset between fit and detection position for source 1 = 0.010259 pixels
[Mon Jul 16 19:16:30 2012] 4761.720000 total counts/ 1073.770000 bgd. counts: snr = 112.545826
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010259 pixels
  Position = (397.7, 348.3) = 2 22 39.58 43 2 6.6
  Extent = 5.4 (5.2-5.5)", rotation angle = 0
  Source counts = 3687.9 +/- 69.0
  Background counts = 1073.8
  Rate = 0.2 +/- 0.003
[Mon Jul 16 19:16:30 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 19:16:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 19:16:30 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 19:16:30 2012] Source does appear to be extended
[Mon Jul 16 19:16:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 20:47:38 2012] Counts = 3687.950000, rescaling region sizes by 2.000000
[Mon Jul 16 20:47:38 2012] XMMSAS src. selection expression = ellipse(34554.365800, 30257.560400, 642.950419, 642.950419, 0.000000, X, Y)
[Mon Jul 16 20:47:38 2012] Writing source region out to fullrun_mos2_xmm0002970201_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 16 20:47:38 2012] Extracting stamp from image fullrun_mos2_xmm0002970201_pi300-10000_cl_sm2.00.img.gz, (361, 311) - (435, 385)
[Mon Jul 16 20:47:38 2012] XMMSAS bgd. selection expression = annulus(34554.365800, 30257.560400, 2143.168062, 4286.336123, X, Y) && !ellipse(30861.084600, 32027.794800, 355.294410, 355.294410, 0.000000, X, Y) && !ellipse(30675.202400, 28385.601800, 1381.720040, 1381.720040, 0.000000, X, Y)
[Mon Jul 16 20:47:38 2012] Writing fullrun_mos2_xmm0002970201_pi300-10000_pass1_cl_src1.gif
[Mon Jul 16 20:47:41 2012] Mean detx,y = (-5504.42, 5333.77) 
[Mon Jul 16 20:47:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 20:48:09 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 20:48:09 2012] Setting source spectrum file to fullrun_mos2_xmm0002970201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 20:48:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0002970201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 16 21:15:00 2012] Updating aperture counts using extracted products
[Mon Jul 16 21:15:00 2012] Error reading totcts from fullrun_mos2_xmm0002970201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 21:15:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 21:15:01 2012] Using photon index=1.80, rate=0.168, arf fullrun_mos2_xmm0002970201_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 21:15:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 21:15:01 2012] Updating source flux to 2.6e-12
[Mon Jul 16 21:16:43 2012] Reading fit data from xmm0002970201/analysis//spectral/fullrun_mos2_xmm0002970201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 16 21:16:43 2012] Spectral fit parameter nH value = 5.30279e+20
[Mon Jul 16 21:16:43 2012] Spectral fit parameter PhoIndex value = 2.38662
[Mon Jul 16 21:16:43 2012] Failed to get F(0.3-8.0) from xmm0002970201/analysis//spectral/fullrun_mos2_xmm0002970201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 16 21:16:43 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 21:16:43 2012] Using Nh = 5.3e+20, photon index=2.39, rate=0.168, arf fullrun_mos2_xmm0002970201_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 21:16:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 21:16:43 2012] Updating source flux to 2.2e-12